Home > General > Eco-Materials Processing and Design XI
Eco-Materials Processing and Design XI

Eco-Materials Processing and Design XI

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

This special collection presents the fruits of a forum where researchers were able to present the most advanced and novel scientific results and technological developments in the field of eco-materials processing and design. The aim was to overview the current status and to foresee future likely trends in the field of eco-materials processing and design of energy- and environment-related materials. Many fruitful and exciting research achievements are presented here; not only in conventional areas, but also in sustainable energy sources such as solar cells and fuel cells, photochemistry, porous materials, biomass, and bio-inspired technologies for developing microstructures offering superior surface and bulk properties. Altogether, this work presents a unique overview of the topic. Volume is indexed by Thomson Reuters CPCI-S (WoS).

Table of Contents:
Committees, Sponsors and Preface A. Materials for Environment Preservation, Energy Conservation and New Energy Preparation of Atomic Oxygen Oxidant by Electrolysis with Ultrasonic Adsorption of Hazardous Heavy Metals Using Reactive Inorganic Agents in Synthetic Wastewater Synthesis of Spherical Carbon Nanoparticles and their EDLC Properties In-Flight Behaviors and Properties of Plasma-Sprayed Tungsten Coatings Thermoelectric and Transport Properties of In-Filled CoSb3 Skutterudites Synthesis and Electronic Transport Properties of Sn-Doped CoSb3 Strength and Densification of Ni/Al2O3 Membrane Compacted with Uniaxial Pressing and CIP for Hydrogen Separation: Influence of Pressing Process Effect of Complexing Agent on Morphology and Crystal Structure of La1-xCexCoO3 (x=0, 0.2, and 0.4) Perovskite-Type Mixed Oxides Catalyst Prepared by Sol-Gel Method Synthesis and Thermoelectric Properties of Half-Heusler Zr-Ni-Sn Alloy Processed by Mechanically Alloying and Hot Pressing Preferential Oxidation of CO over Pt Catalysts Supported on Mesoporous Aluminosilicates in the Presence of H2 Synthesis and Characterization of Poly(ether ketone) Containing Side Sulfonic Acid Group for Proton Exchange Membrane Fuel Cell Adsorption of Ag+ from Aqueous Solutions by Rice Husk Synthesis and Characterization of Dumbbell Shaped Calcium Carbonate Induced by Lignin Fixed Bed Column Filled with Rice Husk for the Removal of Cu (II) from Aqueous Solution Study on the Energy Conversion from the Dynamic Load of Vehicles on the Road Using Piezoelectric Materials Effect of Matrix on Phase Formation of Nanometer TiO2 Film AFM Studies on the Effect of Crystalline Interphase on Adhesion of Polyurethane Thin Film to Al Substrate Lead Based Multi-Alloy Applied to Anode of Zinc Electrowinning Effect of Silicon Carbide Susceptor and Nickel Catalyst Content on Microwave Enhanced Thermal Conversion of Glycerol Waste Synthesis of Nickel-Coated FeS2 Particles as Active Material for Li/FeS2 Cell by Mechanical Alloying Optical and Electrical Properties of Large Area SnO2: F Thin Films by Spray Pyrolysis Preparation of Textured PZT/LaNiO3 Films on LaAlO3 Substrates by Sol-Gel Process B. Materials Processing Technologies for Reduction of Environmental Impact Synthesis of Ti2AlC/Al2O3 Nanocomposites by High Energy Milling and Heat Treatment Study on Preparation of Silica Aerogels/Polystyrene Microspheres with Core-Shell Structure Non-Emulsifiers Multi-Liquid-Crystallized-Phase Opalescence Glaze Relation between Phosphorus Amounts Absorbed by Volcanic Ash Fall Deposits and its Calcinating Temperature Synthesis of V-ZrSiO4 Blue Ceramic Pigments Synthesis of Forsterite Pigment for Underglaze Colors Optimization of Manufacturing Conditions for Activated Carbon from Coffee (Coffea Arabica L.) Bean Waste by Chemical Activation Surface Characterization of Oxygen Plasma Treated Nano-SiO2 Sol-Gel Coating UHMWPE Filaments Pyrolysis of Solid Waste by Thermogravimetric Analysis Preparation and Characterization of Thermoplastic Soy Protein Isolate An Enhanced Algorithm for Detecting Blisters of Glass by Machine Vision Effects of Carbon Fiber Architecture on the Microstructure and Mechanical Property of C/C-SiC Composites Process Feasibility Study on Thermal-Plasma System for HFC-23 Decomposition Modeling of the Stress in 13Cr Supermartensitic Stainless Steel Welds by Artificial Neural Network Artificial Neural Network Approach to Predict Mechanical Properties of 301 Austenitic Stainless Steel Study of Cyclohexane Photooxidation over Pt-WO3 Catalysts Mixed with TiO2 under Visible Light Irradiation Removal of NO2 and SO2 Using Porous Media Made from Sewage Sludge Influence of Strain Aging on the Microstructure-Property of an X100 Pipeline Steel Effect of Electron Beam Irradiation on the Properties of Polyethylene Oxide–TiO2 Composite Electrolyte for Dye Sensitized Solar Cells C. Eco-Materials Processing and Design Study on the Static Recrystallization Behavior of Thermal Deformation of Austenitic Stainless Steel for Nuclear Power Synthesis of Ternary Machinable Al2O3/Ti2AlC Composites by High Energy Milling and In Situ Hot-Pressing Method Novel Preparation of Silver-Coated Copper in Aqueous Solution The Theoretical Research of Constitutive Property, Reactivity and FTIR of Chitosan Synthesis of Ti3AlC2 Powder by High Energy Ball Milling and High Temperature Heat Treatment Scale and Corrosion Inhibition Efficiency of a Novel Terpolymer Effect of Foaming Temperature on Pore Morphology of Al/AlN Composite Foam Fabricated by Melt Foaming Method Dynamic Compression Behavior of Lotus-Type Porous Iron Formation of Hollow and Porous Nanostructures of Iron Oxides via Oxidation of Iron Nanoparticles and Nanowires Fabrication of Lotus-Type Porous Magnesium with Anisotropic Directional Pores by Mold Casting Technique Fabrication of Lotus-Type Porous Al-Ti Alloys Using the Continuous Casting Technique Effect of Transfer Velocity on Porosity of Lotus-Type Porous Aluminum Fabricated by Continuous Casting Technique Effect of Addition of NiO Powder on Pore Formation in Lotus-Type Porous Carbon Steel Fabricated by Continuous Casting Effect of Pore Diameter Distribution on Heat Transfer Capacity of Lotus-Type Porous Copper Heat Sink for Air Cooling Evaluating Durability and Burying Characteristic of PVC Pipe Hot Corrosion of NiCrAlY/(ZrO2-CeO2-Y2O3) Composite Coatings in NaCl-Na2SO4 Molten Salt Formation of Oxide Nanotubes and Bamboo-Like Structures via Oxidation of Cu, Fe and Ni Nanowires Study on Bonding Performances of Air Plasma Treated FRP Fabrication of Lotus-Type Porous Iron by Thermal Decomposition Method EPP (Expanded Polypropylene) Media for Treating Trace Metals from Road Runoff: Performance Risk Assessment Using Uncertainty Analysis Experiment on Combustion-Supporting Agent on PCI for Combustibility of Coal Powder Effects of Oxygen Plasma Treated Carbon Nanotube Coating Basalt Filaments Influence of Vanadium on Aging Characteristics of Cold Rolled Cu-Ni-Si Alloy Experimental Study on Thermal Characteristics of Environment-Friendly Blocks with Water-Absorbing Polymer Study on Thermal Environmental Characteristics of Water-Retentive Asphalt Pavement 3D Free Form Fabrication Using the Pivoting Side Trowel with Ceramic Material Optimization Design of the Bonding Property between Flanges and Web Plates of Wood I-Joists Use of Fly Ash as Bonding Material on Low Thermal Expansion Porous Materials Red Tide Inactivation by Silver Doped TiO2 Produced in Sono-Chemistry Method The Dominant Factor Analysis of Production Technology of Poplar LVL Based on Grey Theory The Development of Solid Fabric Filter for CSOs Treatment Strength Enhancement of Geopolymer-Based Concretes by Mixed Alkaline Activators Evaluation on Application of Artificial Soil Made by Organic Wastes Development of Non Explosive Insulating and Fire Proof Materials Using Porous Industrial Byproducts Decomposition Characteristics of Wood Using Supercritical Methanol for Biodiesel Production Effect of SiC Particle Size on Anti-Oxidation Behavior of C/B4C/SiC Composite Eco-Friendly Fabrication Process of AlTiC Grain Refiner Efficiency Evaluations of Filter Media for Reduction of Non Point Source in Urban Area Corrosion Control of Drinking Water Copper Pipes by Corrosion Inhibitor Application of Polymer Media to the Site for Treatment of Pollutants in Rainfall Effluent of Urban District Deformation of Lotus-Type Porous Copper in Rolling Elastic and Plastic Deformation Behaviors of Lotus-Type Porous Copper Blow Forming of Lightweight Titanium Components D. High Performance Materials Including Nano-Materials for the Environment High Purity Ti2AlC Powder Prepared by a Novel Method Effect of Atmosphere on the Crystallization of Amorphous Silicon Nitride The Mechanical Properties and Fracture Characteristics of AlN/Ti Laminated Composites Effect of Processing Condition on the Microstructure and Mechanical Properties of Ti3SiC2/SiC Composites Fabrication and Microstructure of Fe-Al Intermetallic Compound Powders by Mechanical Alloying Ni Nanoparticles Deposition onto CNTs by Electroless Plating Study on the Erosion Wear Properties of Reaction-Bonded SiC Effect of SiC Particle Sizes on Erosion Wear Behaviour of SiC/Epoxy Resin Composite Effects of Thickness on Thermal and Mechanical Properties of Air-Plasma Sprayed Thermal Barrier Coatings Microstructure Characterization of Duplex Stainless Steel Welding Joint with Different Solution and Aging Treatment Influence of Sigma Phase Precipitation on Pitting Corrosion of 2507 Super-Duplex Stainless Steel Improvement of Oxidation Resistance of SiC/C (Graphite) Composites by Silicon Infiltration in Surface Studies on the Molecular Chain Conformation and Morphology of Konjac Glucomannan in Aqueous Solution Nano Composite Membranes of Sulfonated Amine-Poly(ether sulfone)s and SiO2 for Fuel Cell Application Synthesis and Characterization of Aminoalky Cellulose Synthesis of SiOC Base Fibers from Silicone Resin with Low Carbon Content and Control of Surface Functionality by Metal Chloride Treatment in Vapor Effects of Different Solid Lubricants on Mechanical and Tribological Properties of Al2O3/ZrO2 Nanocomposites Microstructure and Wear Performance of Cu-Mo-Si Alloys Fabricated by Self-Propagation High-Temperature Synthesis Microstructure and Mechanical Properties of Ca-a-Sialon with Low Oxygen Content High Strength and Toughness Al2O3 Composite Materials for the Improvement of Ceramic Channel in SRL Hot Dipping System Influence of Preparation Methods of Supported Zr Oxide Catalysts for Meervein-Ponndorf-Verlay Reduction of Acetophenone Electrodeposition of Ni-SiC Nano Composite in Presence of Ultrasound Boron Nitride Doped Transparent Polycrystalline Silicon Nitride Ceramics Effect of Solution Temperature on Microstructure of 2205 Duplex Stainless Steel Welded Joints Front End Bending in Plate Rolling Influenced by Asymmetrical Entrance Angle A Model of Calculating Contact Length between Stock and Roll during Plate Rolling Effects of the Cooling Rate on the Solidification Microstructure of Cu-Ni Alloy Study on the Microstructure of Au/CdZnTe Interface by HRTEM Surface Nanocrystallization of Zircaloy-4 by Surface Mechanical Attrition Treatment E. Hybrid Materials and Composites for Eco Society Improvement of the Dry Friction and Wear Properties of the Si/SiC by Doping with Ni and PbO Fabrication and Thermal Property of AlN/ Epoxy Composites Preparation and Dielectric Properties of Alumina Filled Epoxy Nano-Composite Optimization Fabrication of Plasma Treated Nano-Titanium Dioxide Particles/PP/PLA Composites Filaments Using Melt Spinning Electroless Copper Plating on Ti3SiC2 Powder Surface Using Ascorbic Acid as a Reducing Agent Dynamic and Static Properties of Wood-Plastic Composites Made of Recycled High-Density Polyethylene Analysis on Microstructure and Mechanical Properties of Pine Laminated Veneer Lumber F. Photocatalysis for a Better Environment and Clean Energy Fabrication and Application of Photocatalytic TiO2 Metal Membrane with Self-Organized Nano Tubes for Water Treatment A New Preparation Method of Visible Light Responsive Titanium Dioxide Photocatalytic Films by Ultraviolet Irradiation Sol-Gel Preparation of Bi2InTaO7 and its Photocatalytic Behavior for Organic Compounds Degradation Effect of Calcination Temperature on the Photocatalytic Activity of Porous TiO2 Film Synergistic Effects of Ferric Stearate, Ferrocene and NiDBC G. Dye-Sensitized Solar Cells for the Utilization of Solar Energy Photoinduced Absorption in P3HT/PCBM Bulk Heterostructures Evaluation Methods of Energy-Storable Dye-Sensitized Solar Cells H. Bio-Inspired Materials for a Better Life and Other Novel Materials In Vitro Bioactivity, Cytotoxicity and Blood Compatibility of Anti-Bacterial Vacuum Plasma Sprayed Titanium Coatings


Best Sellers


Product Details
  • ISBN-13: 9783038133285
  • ISBN-10: 3038133280


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Eco-Materials Processing and Design XI
-
Eco-Materials Processing and Design XI
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Eco-Materials Processing and Design XI

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!