Home > General > Functional and Functionally Structured Materials IV
Functional and Functionally Structured Materials IV

Functional and Functionally Structured Materials IV

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

This volume contains selected and peer-reviewed papers presented at Chinese Materials Conference 2019 (CMC 2019) held in Chengdu City, Sichuan, China, July 10-14, 2019. The Chinese Materials Conference (CMC) is the most important serial conference of Chinese Materials Research Society (C-MRS) and is held each year since the early 1990s. Chinese Materials Conference 2019 had 42 Symposia and 3 Materials Forums covering four fields of energy and environmental materials, advanced functional materials, high-performance structural materials, and design, preparation and characterization of materials. This book will be useful and interesting for many engineers and researchers engaged in materials areas.

Table of Contents:
Preface Chapter 1: Properties and Processing Technologies of Structural Alloys and Non-Ferrous Metals Removal Mechanism of Titanium Alloy Material in Ultrasound Vibration Drilling Effect of Strontium Modification on the Morphology of Primary Si in Hypereutectic Al-Si Alloys Deoxidation Process of Oxidized Zirconium Alloy Effects of Alloying Process on Inclusions in Fe-9Cr Alloy Reinforced with Y2O3 Nanoparticles Microstructure Formation and Nanoindentation Behavior of Rapidly Solidified Cu-Fe-Zr Immiscible Alloys Effect of RE Addition on the Solidified Process and Microstructure of Al-7Si-0.3Mg Alloys Correlation between Solidified Microstructure Evolution and Undercooling of Au-12 Wt.%Ge Eutectic Alloy Mechanical and Tribological Behaviors of WAl12 Reinforced 2024 Aluminum Alloy Matrix Composites Research on Strong Spinning Process of GH4169 Alloy Preparation of Titanium Alloy Powder by Plasma Rotating Electrode Process Microstructure and Mechanical Properties of 5052 Al Alloy by Cryogenic Rolling Microstructure and Mechanical Properties of GMAW Welded Joints Er-Containing Aluminum Alloy Penetration Damaging Behavior of TB17 Titanium Alloy Effect of Extrusion Temperature on Microstructure and Mechanical Properties of 7A36 Aluminum Alloy Investigations on the Hardness Distribution and Microstructure of Friction-Stir-Welded 6082 Aluminum Alloy Microstructure of 7N01 Aluminum Alloy Microalloyed with Er and Zr in the Homogenization Process Microstructure and Macrosegregation of ?508 mm 7050 Aluminum Alloy Billet under Internal Electromagnetic Stirring Microstructure of 7075 Aluminum Alloy by Homogenization Modeling of Yield Strength in Retrogression of RRA Treatment of Spray Formed Al-Zn-Mg-Cu Alloy Effect of Ca and Zr Additions and Aging Treatments on Microstructure and Mechanical Properties of Mg-Sn Alloy Effect of Ca on Microstructure and Mechanical Properties of Directionally Solidified Mg-Zn-Ca Alloys Effects of Process Parameters on Shrinkage Porosity in 357 Semi-Solid Die Casting Parts Study on Compression-Torsion Deformation Behavior and Recrystallization Grain Size of Mg13Gd4Y2Zn0.5Zr Alloy Microstructural Evolution and Properties of Cu-1.5 Wt %Ti Alloy during Aging Microstructure, Texture and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy during Repetitive Upsetting-Extrusion after Heat Treatment Microstructure and Properties of Rapidly Solidified Al-Zn-Mg-Cu Alloy Microstructures and Mechanical Properties of a New Type of High Temperature Titanium Alloy Effect of Primary a Phase Content on Creep Property of High Temperature Titanium Alloy Effect of Heat Treatment Process on Microstructure of a New Metastable ß Titanium Alloy Hot Compressive Behavior and Constitutive Equation of Ti-Al-Nb-Zr-Mo-Cr Alloy Constitutive Equation and Hot Processing Map for Tensile Test of Mg-13Gd-4Y-2Zn-0.5Zr Alloy at Elevated Temperature Semi-Solid Rheological Squeeze Casting Process of ZL114A Aluminum Alloy Thin-Wall Complex Casting Effect of Different Deformation Methods on Microstructure Evolution of TC4 Titanium Alloy Prepared by Spark Plasma Sintering Fatigue Crack Growth Behavior of TA29 Titanium Alloy at Different Temperatures Preparation of 2A14 Aluminium Alloy Large-Sized Hollow Ingots by Electromagnetic Stirring DC Casting Structure Evolution of Au50Cu50 Alloy from Melt to the Disordered Solid Solution Solidification Microstructure and Mechanical Properties of Bulk Near-Eutectic AlCoCrFeNi2.2 High Entropy Alloy Effect of Combined Electromagnetic Fields on Microstructure and Properties of Large-Sized Ingot of 2219 Aluminum Alloy Mechanical Behavior and Microstructure of Hot Deformation of with Er 7N01 Aluminum Alloy Oxidation Behavior of Ta-W Alloy Precipitation Behavior and Strengthening Mechanism of Second Phases in AZ31-1.3Ca-1.0Sm-0.3La Alloy Microstructure of Ti-Based Alloys after Rapid Solidification Effect of Solution Treatment on Second Phase Dissolution for an Al-9.2Zn-2.0Mg-1.9Cu Alloy Analysis of Porosities in Nickel-Based Superalloys Powders Ultrasonic Preparation of Submicron Low Melting Point Alloy Powder Non-Isothermal Kinetics Analysis of a?ß Transformation in Zirconium Alloy Microstructure and Mechanical Properties of a Novel Ti-6.5Al-2Sn-4Zr-1.5Mo-2Nb-0.25Fe-0.2Si High-Temperature Titanium Alloy Effect of Cu Content on Ageing Behavior for AA3104-H19 Can Body Sheet In Situ Observation on the Deformation Behavior of Primary a-Ti in a Textured Ti-6Al-4V Development of Copper Alloy-Steel Bimetallic Bearing Materials and Manufacturing Technology Microstructures and Phase Formation of Refractory MoNbTaVZr High Entropy Alloy Preparation and Properties of Spherical Mo Powders by Plasma Rotating Electrode Process for Additive Manufacturing Effects of Electromagnetic Agitation on Crystal Growth during the Pure Aluminum Slow Cooling Process A Review on Water Footprint Research of Materials Industry Progresses on Development of Manufacturing Methods of High Purity Tungsten Targets Finite Element Analysis on Processing of PCD End-Mill Milling Copper Microstructure and Texture Evolution of 0.6 mm Ultra-Thin-Walled Tubes of Magnesium Alloys Fabricated by Multi-Pass Variable Wall Thickness Extrusion (VWTE) Microstructural and Textural Evolutions of OFHC Cu during the CECC Process and Annealing Treatment Chapter 2: Properties and Processing Technologies of Structural Steels Growth Kinetics of Interfacial Intermetallic Compound in Al(AA4343)/Steel(SUS316) Clad Strip Microstructure and Properties of 20G/316L Dissimilar Metal TLP Welded Joints Microstructure and Properties of Lean Duplex Stainless Steel UNS S32101 Welded Joint by Hot Wire TIG Welding Effect of Thermal Aging on the Stress Corrosion Cracking Sensitivity of Z3CN20.09M Stainless Steel Static Recrystallization Behavior of Non-Quenched and Tempered Steel 38MnSiVS Effects of Zero Time Holding Quenching Temperature on Tempering Microstructure and Mechanical Properties of 40Cr Steel Simulation of Mechanical Property and Fracture Behavior of Reactor Pressure Vessel Steel by Small Punch Test Effect of Ferritic Hot Rolling Process on Microstructure and Properties of IF Steel EBSD Study of the Effect of Hot Deformation on Low Carbon Bainitic Structure Retained Austenite Control and Extra-Cryogenic Impact Toughness of Fe-3.0%Mn Low Carbon Steel Prediction Model for Microstructure and Properties of Medium Carbon Non-Quenched and Tempered Steel Bar Effect of Composition System on Microstructure and Properties of 1000-MPa Grade Cold Rolled DPSteel Accelerated Transformation of Hot Deformed Austenite in SCM435 Steel Effects of Final Cooling Temperature on Microstructure Transformation and Properties of Q550 Low Carbon Bainite Steel Reliability Prediction of Variable Amplitude Corrosion Fatigue Life of TP140 Casing Steel Comparative Study on Hydrogen Embrittlement Susceptibility in Heat-Affected Zone of TP321 Stainless Steel Investigation on the Microstructure and Mechanical Properties of T23 Steel during High Temperature Aging Optimized Design of Ultra-High Strength Stainless Steel Based on Thermo-Calc Calculation Effect of Tempering Temperature on Microstructure and Properties of Low Carbon High Silicon Alloy Steel Treated by Q-P-T Process Analysis of Interfacial Bonding Strength and Microstructure of Rolled Clad Plates Applications of Nickel-Based Alloy for Oil Country Tubular Goods Analysis of Tensile Properties of N80Q Steel and 80SH Steel Application Feasibility Study of High Strength Pipeline Steel to Rig Derrick and Substructure Mechanical Response and Performance Relationship of X70 Pipeline Steel with Weld Zone Chapter 3: Polymers and Composites Preparation and Property of Waterborne Polyurethane/Cellulose Nanofiber Nanocomposite Films Preparation and Magnetic Properties of Fe@SiO2 Soft Magnetic Composites Microstructure and Properties of Co@RGO/Cu Composites by One-Step In Situ Reduction Method Functionalization of MWNTs and its Influence on Thermal Performance of Modified Diphenyl Ether Polyimide Films Manufactory and Properties of Poly(p-Phenylenebenzobisoxazole) Aerogels Prepared by a Simple Freeze-Drying Procedure Preparation and Properties of Halogen-Free Flame Retardant Polyurethane for Superfine Fiber Leather Effect of Simulated Seawater on Flexural Property of Corn Straw Fibers Reinforced Polypropylene Composites Effect of Carbon Nanotubes Sizing Agent on the Mechanical Properties of Carbon Fiber/PP Composite Synthesis of Four-Armed Star-Shaped Poly(N,N- Diethylacrylamide) by Group Transfer Polymerization in the Presence of Hydrosilylane Effect of Air Oxidation Treatment on Interficial Properties of Carbon Fibers Preparation of Silver Nanoparticles-Loaded Gel Fibers Based on Microfluidic Method and its Application as SERS Substrates Effect of Copoly(Ester-Amide 6)(PET-PA6) on Compatibility of PET/PA6 Blended Fibers Effect of Casting and Additive Manufacturing on the Microstructure and Mechanical Property of Al-Cu Composites Effect of Graphene Content on Microstructure and Properties of Gr/Cu Composites Effect of SiC Defects on Performance of Particle Reinforced Aluminum Matrix Composites Effects of Sintering Parameters and WC Addition on Properties of Iron-Nickel Pre-Alloy Matrix Diamond Composites Effects of Retrogression Treatment Process on the Mechanical Properties and Corrosion Behavior of the Graphene/7075 Aluminum Matrix Composite Semi-Solid Precision Forming Process of High-Strength and Wear-Resistant Aluminum Matrix Composites Chapter 4: Advanced Functional Materials High Temperature Stability of Zirconium Tungstate Co-Amorphous Telmisartan-Pimelic Acid with Improved Solubility Effect of the Addition of Short Carbon Fiber on Thermal Insulation Properties of ZrB2- SiC Hot-Pressed Ceramics Effect of Additive Glycerol on Piezoelectric Properties of Modified Sol-Gel (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 Ceramics Application Perspective of Environmentally Responsive Materials in the Downhole Operation Preparation of Nanocrystalline Fe2O3 Powder by Cryomilling with Liquid Nitrogen and its Magnetic Property Cobalt Element Doping for Biomedical Use: A Review Development of Ferromagnetic Sputtering Targets with High Performance Numerical Simulation of Ti-Based Metallic Glasses as Whipple Shield Bumper by Smoothed Particle Hydrodynamics Methods Effect of Nano Sodium Titanate/ Potassium Titanate Whisker on Tribology Behavior of Brake Materials Preparation and Formation Mechanism of High-Energy Ball-Milled Sn4P3 Effect of Ruthenium on Microstructure and Properties of WC- (W, Ti, Ta) C-Co Cemented Carbide Integrated Computation and Preparation Optimization of In Situ Ordered Porous Aluminum Filled Tubes Quasi-Static Axial Compression Behavior and Energy Absorption Evaluation of Steel Foam-Filled Tubes Preparation and Characterization of High Mobility Nb-Doped SnO2 Transparent Conducting Films Effect of Amount of Nb/Ti Co-Doping on the Microstructure and Electrochemical Performance of SrCoO3-d-Based Perovskite Lotus Leaf Derived Natural Dye as Sensitizer and Biochar as Counter Electrode for Dye-Sensitized Solar Cells Effect of Hydrothermal Conditions on Crystal Structure, Morphology and Visible-Light Driven Photocatalysis of WO3 Nanostructures Effects of Co Doping on the Thermoelectric Properties of Cu3SbSe4 at Moderate Temperature The Effect of Stretching on UHWMPE Microporous Film by Thermally Induced Phase Separation Method Improved Sublimation Resistance of Skutterudites by Silane Modified Ceramic-Based Coating Preparation and Numerical Simulation of Heat Transfer Performance for Methyl Palmitate-Methyl Stearate Binary Eutectic Mixture/Expanded Graphite Composite Phase Change Material Preparation and Characterization of Low Dielectric Constant Films Using Silicon Sources Green Synthesis of Tungsten Ditelluride and the Magnetoresistance Property Chapter 5: Computational Procedures in Materials Science Microscopic Properties of Point Defect and its Cluster in Delta-Phase Plutonium: A Molecular Dynamics Study Effect of Grain Boundary Energy in Recrystallization Simulation by Phase Field Method Computational Studies of the Synthesis of Decaborane with Olefins Phase Field Study of Second Phase Particles-Pinning on Strain Induced Grain Boundary Migration Numerical Simulation of Ni-Cu Alloy Dendrite Growth with Boundary Heat Flux Thermodynamic Calculation of the Liquidus Projections of the Al-Cu-Fe-Si and Al-Cu-Fe-Mg-Si Multicomponent Systems on Al-Rich Side Steady-State Dynamic Phase Diagram Calculation of U-Ti and U-V Binary System under Irradiation Using ProCAST to Study the Effects of SEED Process Parameters on the Radial Temperature Distribution in Semi-Solid Slugs Cascades Damage in ?-Iron from Molecular Dynamics Simulations First-Principles Study of Structural, Mechanical, and Thermodynamic Properties of Refractory Metals (Rh, Ir, W, Ta, Nb, Mo, Re, and Os) Thermodynamic Calculation of the Liquidus Projections of the Al-Cu-Fe-Mg, Al-Cu-Mg-Si, and Al-Fe-Mg-Si Quaternary Systems on Al-Rich Corner Thermodynamic Study of Equilibrium Phase in Quasicrystalline Strengthened Magnesium Alloys Kinetic and Strength Calculation of Age-Hardening Phases in Heat-Resistant Aluminum Alloys with Silver Development of Interatomic Potentials for FCC Metals Based on Lattice Inversion Method Chapter 6: Functional Coatings, Surface Treatment, Corrosion Behavior and Failure Analysis of Structural Materials Bending Strength and Cutting Performance of WB-Coated-Diamond/Fe-Ni Composites Corrosion Resistance of Nickel-Based Composite Coatings Reinforced by Spherical Tungsten Carbide Corrosion Behavior of Cobalt Alloy Coating in NaCl Solution Erosion Behavior of PS-PVD Thermal Barrier Coatings and the Effect of Composite Coating (PS-PVD + APS) Thickness Surface Control of K9 Glass/Diamondunder Cold Plasma Assisted Cutting Corrosion Resistance of Zinc Phosphate Conversion Coatings on AZ91D Surface Failure Analysis on Friction and Wear of Tool Joints Effect of Nickel Plating on MoS2 on Friction and Wear Properties of Cu-MoS2 Composites Effect of Graphene Content on Composition and Corrosion Resistance of Co-Ni-Graphene Composite Coating Research Progress on Anti-Corrosive Properties of Graphene Modified Coatings AlCoCuFeNi High-Entropy Alloy Coating Fabricated by Laser Cladding with Gas-Atomized Pre-Alloy Powders Threaded Failure Analysis for Three-Dimensional Horizontal Wells Casing Leakage Failure Analysis of 80SS Tubing in Gas Field Corrosion Behavior for Casing in Producing Well with Water Injection Technology during Long-Term Service Analysis of Weld Cracking in a Low-Pressure Steam Pipe Experimental Study on Flow-Induced Corrosion of Casing and Tubing Steel for Heavy Oil Thermal Recovery Wells Casing Bearing Capacity with Shear Load for Shale Gas Wells Simulation of Gas-Liquid Two-Phase Flow-Induced Corrosion at Premium Connection in High Productivity Gas Wells Containing CO2 Challenge and Review of Hydrogen Sulfide Corrosion Resistance Steels for Oil Country Tubular Goods Test Analysis of Corrosion Perforation in a Crude Oil Gathering Pipeline Analysis of Corrosion Causes in the Export of a Compressor in the Pipeline of Western China Leakage Failure Analysis of the ERW Steel Pipeline Development Direction of Pipeline Corrosion Research on Oil Refining and Chemical Enterprises Fracture Failure Analysis of F50.8mm Coiled Tubing Analysis of Corrosion Behavior on External Surface of 110S Tubing Fracture Failure Analysis of C110 Oil Tube in a Western Oil Field Experimental Study on Corrosion of Multi-Component Thermal Fluid Thermal Recovery well Tube String Failure Analysis and Solution to Bimetallic Lined Pipe External Stress Corrosion Cracking Risk Factors of High Grade Pipeline Steel Failure Cases Analysis in Aerospace Field Surface Galling Mechanism Analysis of Rotary Shouldered Thread Connection Failure Analysis and Service Life Prediction of 80SH Casing Steel under Thermal Cycle Service Environment Chapter 7: Properties of Oil Well Cements and Advanced Building Materials Effects of Compressive Stress on Carbonation-Induced Degradation of Oil Well Cement under CO2 Storage Environment Function Synergy of a New Type of Fluid Loss Additive Formula for Comprehensive Performance of Oil Well Cement Sealing Analysis of Cement Plug in Offshore Abandoned Wells Performance Evaluation of Polycarboxylic Acid Dispersant for Oil Well Cementing Salt-Tolerance Performance of Oil Well Cement Fluid Loss Additive SSS/HAM/IA Mechanical Properties and Microstructure of Slag Solidified Body Effect of FCC Slurry on Performance of SBS Modified Bitumen Synthesis and Application Performances of Solid Polycarboxylate Superplasticizers Using Different Initiators Performance Evaluation of Anti-Ultraviolet Ageing Bitumen with Combined Modification Based on Dynamic Rheological Test Effect of Pore Structure and Ion Concentration of Solution on the Formation of Ettringite in Composite Cement Paste Chapter 8: Materials, Technologies and Assessment Methods in Environmental Engineering and Waste Recycling One-Step Synthesis of Visible-Responsive Diatomite/g-C3N4 Composite and its Catalytic Degradation for Cr(VI) Effect of Cement Raw Meal on the NO Reduction by Biomass Char Effect of Dimethyl Sulfoxide in Hydrophobic Modification of Cotton Filter Cloth by ARGET-ATRP Mechanism Life Cycle Assessment of Green Production of Glass Substrate Preparation of Alginate Polymer Gel Pellets and its Adsorption on Acid Dyes Preparation of CTS/MFA Composite and its Adsorption Property of Direct Dyes Removal of Metal Impurities from the Spent Hydroprocessing Catalyst and Acid Leaching Kinetics of Aluminum Preparation of Hydrated Calcium Silicate Gel and its Adsorption Properties for Cu(II) Effect of Silica-Alumina Ratio of Catalysts on NO Decomposition Rate in Cement Kiln Exhaust Environmental Impacts Assessment of NCM Cathode Material Production of Power Lithium-Ion Batteries Analysis of Water Consumption Intensity for Steel Production in China Comparative Life Cycle Assessment between Ordinary Gypsum Plasterboard and Functional Phase-Change Gypsum Plasterboard Technical Specification Development for Ceramic Tile Type III Environmental Declarations Life Cycle Assessment of Comprehensive Utilization of Calcium Carbide Slag in Cement Kiln One-Step Hydrothermal Synthesis of 1T@2H MoS2 for Enhanced Photocatalytic Degradation Performance of Methyl Blue Determination of Antimony in Recycled Polyester Fiber by ICP-OES with Different Pretreatment Methods Determination of Volatile Organic Compounds in Recycled Polyethylene Terephthalate Fibers by HS-GC-FID to Evaluate the Efficiency of Testing Conditions Quantitative Analysis on Green Product Index of Sanitary Wares Environmental Analysis on Co-Processing of Domestic Waste in Cement Kiln Recent Developments on Life Cycle Assessment of Building Materials Carbon Emissions Analysis of Rock Wool Board Products


Best Sellers


Product Details
  • ISBN-13: 9783035735666
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3035735662
  • Publisher Date: 22 May 2020
  • Binding: Digital download and online
  • No of Pages: 1588


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Functional and Functionally Structured Materials IV
Trans Tech Publications Ltd -
Functional and Functionally Structured Materials IV
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Functional and Functionally Structured Materials IV

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!