Home > General > Material Science and Engineering Technology III
Material Science and Engineering Technology III

Material Science and Engineering Technology III

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Material Science and Engineering Technology (ICMSET 2014), October 24-26, 2014, Beijing, China. The 93 papers are grouped as follows: Chapter 1: Advanced Composites, Special Materials and Technologies, Applied Materials; Chapter 2: Solid State Materials, Alloys, Reiforced and Functional Materials; Chapter 3: Chemical and Biomaterials; Chapter 4: Earth, Building and Construction Materials; Chapter 5: Materials Processing Engineering, Surface and Coating; Chapter 6: Modelling Analysis and Simulation for Materials

Table of Contents:
Preface and Committee Chapter 1: Advanced Composites, Special Materials and Technologies, Applied Materials Effects of Anti-Clogging in Ultra-Soft Soils Using Different Composite Filter Material Research on Heat Resisting Epoxy Resin System for Liquid Composite Molding The Crystal Structure and Ionic Conductivity of Layered Composite of SDC-YSZ-SDC Degradation Mechanism of Glass/Polyester Composite Exposure to Acidic and Alkaline Solutions at Room Temperature Synthesis and Characterization of Aluminiun 2219 Reinforced with Boron Carbide and Molybdenum Disulfide Metal Matrix Hybrid Composites Analysis of Cooling Curves, Microstructure and Properties of Chill Cast Al-B4C Composites The Preparation of Fluorocarbon Thermal Insulation Coating with Different Fillers Thermogravimetric Analysis and Chemical Kinetic for Regeneration of Sodium Carbonate Solid Sorbent Hybrid Nanocomposite Material for EMI Shielding in Spacecrafts Effects of Design Parameters for Clay Brick Kiln Using Computational Fluid Dynamics and Experimental Design Influence of Graphene Nanoplatelet Filling in Thermoplastic Natural Rubber Antistatic Nanocomposite Using Combination of Solution and Melt Mixing Method Tribological Properties of MWCNTs Strengthened Aluminum Composite Fabricated by Induction Melting Structural, Elastic and Optical Properties of Ag-Doped Rutile TiO2 First Principles Calculations on Cu-Doped TiO2 A Novel Preparation of Carbon Foams Derived from Albumen Thermal Property Evaluation of Chilled Aluminum-Alumina MMC Chapter 2: Solid State Materials, Alloys, Reiforced and Functional Materials Development and Property Evaluation of Chilled MMC Prepared with LM25 as Matrix and SiO2 (Glass) Particulates as Dispersoids Experimental Studies on CNT Reinforced Aluminum Matrix Nanocomposites Deformation Behavior of Cu-8wt%Ag Alloy during Equal Channel Angular Pressing Vacuum Brazing Incoloy 800 Using the Copper Foil Effect of Grain Refinement on Shape Memory Properties of Cu-Al-Mn SMAs The Influences of Ru Seed Layer Microstructure on Structural Properties of CoCrPt-SiO2 Perpendicular Media Oxygen Impurity in Germanium Single Crystals Determination by Infrared Spectrometry Morphological Transformations of Top Electrodes on YMnO3 Caused by Filamentary Resistive Switching in the Oxide Matrix Phase Transitions and Elementary Processes in Shape Memory Alloys Effects of Aluminum Addition on Microstructural Characteristics in Modified Coated Nickel-Based Superalloy, GTD-111, by Arc Melting Preparation of LiMn2O4 Microstructure by Low Temperature Solid-State Reaction for Cathode Material Morphological and Dimensional Properties of Colloidal Silver Nanoparticles Prepared under Microwave Irradiation Electrochemical Oxidation of Dissolved Carbon Monoxide on Rotating Disk Electrodes and Micro-Electrodes Coal Fly Ash as a Dual Site Material for Cr(VI) Adsorption: Comparation between Single Site and Dual Site Isotherm Models Characterizations of Indium-Doped Cu2SnSe3 Bulks Made by Reactive Sintering at 550 °C Die Soldering Phenomenon on the H13 Tool Steel with Shot Peening and Nitriding Surface Treatment Structural and Electrical Properties of Silver-Doped Zinc Oxide Nanorods Array Femtosecond Laser Pulses Operation in Crystal under High-Power Diode Pumping Recovery of Magnesium Oxide from Kimberlite Tailing of Panna Diamond Mines Effect of Aging on Phase Transition Behavior of Ti50Ni15Pd25Cu10 High Temperature Shape Memory Alloys Influence of Ingate Thickness and Pouring Temperature on Structure and Fluidity of Cast Hyper-Eutectic Al-18%Si Alloy Synthesis of Metal Doped BiFeO3 Nanoparticles and their Dielectric and Magnetic Properties A First Principle Study of the Massive TMR in Magnetic Tunnel Junction Using Fe3Al Heusler Alloy Electrodes and MgO Barrier Quaternary Ammonium Modified Silica for Gold(III) Sorption Recovery of Nanoparticles of Metal Values from Spent Metallized Graphite Brushes and Slip Rings Influences of Temperature and Strain Rate on Microstructure of Manganese Aluminum Bronze Alloy Effect of Thermomechanical Treatment (TMT) on Hardness, Impact Toughness of Different Grades of Low Alloy Steels Correlation between Alloying Elements and Aging Parameters and Hardness and Machinability of Aluminum-Silicon Alloys Using Minitab Software The Influence of Temperature on the Galvanic Corrosion in Multi-Material System in Seawater Surface Treatments of Titanium Alloy for Preparing Laminated Composite Material The Impact of Generalized Stacking Fault Energy on the Mechanical Properties of Shuffle Dislocation in Zigzag Single-Walled Carbon Nanotubes The Influences of Annealing Temperatures on the Properties of HfO2 Thin Film and the Fabrication of SiO2/HfO2 Distributed Bragg Reflector Chapter 3: Chemical and Biomaterials The Multiband Fractal Antenna on Polymer Substrate Prepared by Using Inkjet Print Technology Based on Silver Nanoparticles Exploration of Using Deep Eutectic Solvents to Separate Methyl Palmitate from Simulated Biodiesel Mixtures Extraction of Astaxnathin from Portunustrituberculatus Using Ionic Liquids as Additives of Extraction Solvents Novel ß- Cyclodextrin Functional Monomers and its Application for Molecularly Imprinted Polymers Surfactivity of a Series of Nonionic Fluorocarbon Surfactant - Perfluorousnonenyl Polyethylene Glycol Ether Synthesis of Magnesium Based Layered Hydroxide Salt and its Chemical Heat Storage Properties Environmentally Friendly Catalyst of Zirconium Pillared Saponite for Solvent Free Esterification of Menthol Development of the Synthesis of Chromium and Molybdenum – Amino Acid Complexes: A Green Chemistry Approach Model of Phanerochaete chrysosporium Growth and Multisubstrate Degradation on the Biological Pretreatment of Water Hyacinth Sonochemical Co-Precipitation Synthesis of Gallic Acid-Modified Magnetite Adsorption of Remazol Brilliant Blue R (RBBR) by C-4-Ethoxy-3-Methoxyphenylcalix[4]Resorcinarene Triphenylphosphonium Chloride Kinetics of Enzymatic Hydrolysis of Cellulose Using Aspergillus niger Photocatalytic Degradation of Methylene Blue Using Visible Light Active N-Doped ZnO Experimental Investigation of Mueller Matrix of a Bidispersed Foam Using Polarised Light Scattering Enhanced the Negative Charges of Antheraea pernyi Silk Fibroin by Methylglyoxal Modification Graphene Based Polymer Strain Sensors for Non-Destructive Testing Steam Reforming of Glycerol for Hydrogen Production over Ni Catalysts Supported by CeO2-Al2O3 Xerogel Preparation, Surface Activity and Application of Fluoro-Spreading Agent Saccharose as a New Space Holder Material for Porous Titanium Implant Formation Preparation of Magnetite-Mg/Al Hydrotalcite through Hydrothermal Process and Subsequent Calcination The Effect of Thermal Cycling on the Agglomeration of Fuel Cell Electrocatalysts Characterization of Thermal Conductivity and Viscosity of Nanofluids with Aqueous Base Fluids Potentiodynamic Polarization Studies of Glycerin in Platinum Electrodes Chapter 4: Earth, Building and Construction Materials Mechanical Behavior of Multi-Pylon Steel Cable-Stayed Bridge Artificial Weathering Analysis and Mechanical Behavior of Geotextiles Used for Coast Erosion Control and Beach Restoration Parametrical Investigations on Concrete-Jacketed RC Columns with Pre- and Post-Corrosion Damage Performance Analysis of Fine Mineral Fillers in Gypsum Plasters Sound Absorption Analysis of Micro Perforated Panel with Ladder Change Type Cross Section Design Proposal for Concrete Cover Separation in Beams Strengthened by Externally Bonded Tension Reinforcement Chapter 5: Materials Processing Engineering, Surface and Coating Surface Roughness Optimization in Turning Operation Using Hybrid Algorithm of Artificial Bee Colony with RSM Effect of Cutting Parameters on Tool Life: Case Study Twist Drill Identification of Friction Characteristics and Flow Stress of 0.45% Carbon Steel during Cutting Process Development of Vacuum Levitation Melting Technology in China Thermal Stress Cleaving of Si-Wafer: Investigation of Fracture Initiation during Laser Beam Irradiation Effect of Heat Treatment on the Microstructure of Plasma Spray SUS316L Stainless Steel Coating Effect of Na2SO4-V2O5 Mixture on Y2O3 Stabilized ZrO2 Thermal Barrier Coatings Exposed at High Temperature Chapter 6: Modelling Analysis and Simulation for Materials Numerical Simulation of Solidification Processes of Copper Alloys by Vacuum Continuous Casting Dissimilar Welding Simulation of 316L and Low Alloy Steel Using the SYSWELD Simulation Constitutive Modeling of Flow Stress of MAB Alloy The Simulation of Laser Cleaning of Magnetic Head with Different Temporal Pulses Effect of Thick Wall on Transport Profile inside Pipeline Using Computational Fluid Dynamics Simulation Deflection Simulation of Ionic Polymer Metal Composites (IPMC) Actuators for Bionic Knee Joints Mathematical Modeling of the Drying Process of Chrome Shavings Suppression of Thermocapillary Effect in Evaporating Thin Film of Micro Heat Pipes Mathematical Formulation of the Global Coefficients of Transmission and Reflection of Ultrasonic Waves in Bi-Phase Porous Medium


Best Sellers


Product Details
  • ISBN-13: 9783038269144
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 303826914X
  • Publisher Date: 29 Apr 2015
  • Binding: Digital download and online
  • No of Pages: 504


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Material Science and Engineering Technology III
Trans Tech Publications Ltd -
Material Science and Engineering Technology III
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Material Science and Engineering Technology III

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!