Home > General > Progress in Power and Electrical Engineering
Progress in Power and Electrical Engineering

Progress in Power and Electrical Engineering

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

The extensively peer-reviewed contents of this book cover the topics of engineering thermophysics, thermal engineering, power machinery and engineering, fluid machinery and engineering, HVAC, air-conditioning and refrigeration, power systems and automation, high-voltage and insulation technology, electrical theory and new technology, power electronics and power drives. The work is an invaluable guide to these subjects

Table of Contents:
Preface and Organizing Committees Chapter 1: Engineering Thermophysics Mass Transfer Mechanisms of Weak Base Complex System in Porous Media The Influence of Solid Wall-Fluid Molecular Interaction on Transport Properties of Gases in a Mini/micro Channel Wall Shape on the Influence of the Spray Wall-Impingement under Common Rail System Influence of Coil Inclined around Y Axis on Thermomagnetic Convection of Air in a Porous Cubic Enclosure under Zerogravity Effect of Substrate Conditions on Residual Stresses of Plasma-Spraying YSZ / Sm2Zr2O7 Thermal Barrier Coatings Adsorption Equilibrium and Kinetics of Copper from Aqueous Solutions on Steel Slag Surface Tension and Bubbles The Effects of Low Flow Rate Gas Involvement on Oil-Water Flow in Horizontal Pipes Analytical Solution of Slip Flow of Nanofluids over a Permeable Wedge in the Presence of Magnetic ?eld The Governance Mechanism of Recycling of Waste Electrical and Electronic Equipments Effect of Top-Layer Thickness on Thermal-Shocking Property of Plasma-Spraying Sm2Zr2O7/YSZ Thermal Barrier Coatings Numerical Simulation on Catalytic Combustion of Hydrogen inside Micro Tube Study on Deproteinization and Decoloration in Fucoidan Exergy Analysis and Optimized Power Generation Applied to the Co-Combustion of Sewage Sludge and Coal Study on Collision Avoidance of Head-on Situation in Restricted Visibility Comparing and Analyzing Influence of Basalt and Carbon Fibers on the Cement Mortar Axial MHD Flow of a Generalized Oldroyd-B Fluid Due to Two Oscillating Cylinders Experimental Study on Start-up Characteristics of Pulsating Heat Pipe Water Source Determination of Mine Inflow Based on Non-Linear Method and Hydrochemical Characteristics Influence Analyzing of Slope Stability with Setting of Crushing Station in Semi-Continuous Technology Big Diameter and Long Drilling-Holes Technology and its Application in Drainage Gas in Dingji Coal Mine Field Test Research of Pile-Plank Structure on Zhengzhou-Xi'an High-Speed Rail Study on Catalytic Combustion Characteristics of Hydrogen inside Micro Scaled Tube Sine Function and Power Function Model with Photovoltaic Generation System in Simple Installation Analysis of Urea Solution and Experimental Study for Adaptability of SCR Converter in Vehicular Diesel Engines Study on Centers of Gravity for Energy Production, Consumption and CO2 Emission in China The Studies on the Esterification of Oleic Acid Using P2O5/CaCl2/Fe3O4 Composite Catalysts Experimental Study on Internal Flow Field of Wet Desulphurization Tower Investigation about Thermal Shock Property of Plasma-Spraying Sm2Zr2O7 Thermal Barrier Coatings with Different Substrate Condictions The Fault Line Selection Method of Small Current Grounding System Based on Wavelet Transformation Experimental Research on Resistance and Heat Transfer Properties of Corrugated Plate Air-Cooled Heat Exchanger Evaluating on Effect of HVAC Series with Impulse Excitation Voltage on Porcelain Insulator by Using Rotating Wheel Dip Test Weakly Compressible Fluid Model to Study Thermal Effects on Laser Propagating in Closed Tube Investigation on the Combustion Properties of Refuse Derived Fuel in an Internally Circulating Fluidized Bed Influence of Coil Inclined around X Axis on Thermomagnetic Convection of Air in a Porous Cubic Enclosure under Zerogravity Couette Flow of a Generalized Oldroyd-B Fluid due to Constantly Accelerated Shear Stress Coupled with the Pressure Gradient Experimental Research on the Performance of the Entrainment Jet Clean-up System Based on PIV Technology Numerical Study of Joint Magnetisztion and Gravitational Convection of Air in a Square Enclosure under Quadrupole Magnetic Field Applicability of Ground Source Heat Pump in Cold Areas The Optimal Selection Investigation on Flame Holder for Afterburner The Research on Ammonia Nitrogen Transport in Different Kinds of Soil Nanofiber Sheets with the Superabsorbent Properties Predicting Ash Fusibility of Coal from Coal Properties Preparation and Characterization of Solid Biomass Fuel from Waste Mushroom Cultivation Bags Precision Cultivation of Phaeodactylum tricornutum and Free Lipid Acid Analysis The Influence of Thickness of Nitrocellulose Wood Lacquer on Formaldehyde Emission Rates Deposition of Chloride in Two-Phase Flow for the Superheater via Numerical Simulation Experiment and Thermodynamic Analysis on Mineral Formation of Cement Clinker Cogeneration from Coal in Pulverized Coal Combustion Boiler Measure of the Optical Properties of Semiconductor Pb3O4 Nano-Crystalline of Using Photo-Acoustic Technology The Simulation Study of Air Cooler in an Integrated Coal Gasification Combined Cycle System Application Life Cycle Assessment to Diammonium Phosphate Production Chapter 2: Thermal Engineering Technical and Economic Evaluation on Overall Condition of Circular-Cooler Waste Heat Power Station Progress of Closed-Cycle OTEC and Study of a New Cycle of OTEC Interaction of CO with CuO and CuO/graphene: Reactions Mechanism and the Formation of CO2 An Unsteady Model for Natural Ventilation with Solar Chimney The Application of Mathematical Model and Numerical Simulation in the Pneumatic Drying of the Straw Experimental Investigation of the Influence of the Gas Type on the Heat Transfer in a High-Vacuum-Multilayer-Insulation Cryogenic Tank After Sudden, Catastrophic Loss of Insulating Vacuum Thermodynamic Analysis of Magnesium Produced by CaC2 under Ordinary Pressure Exergo-Economic Performance Evaluation of Enhanced Tube under Equivalent Pump Power Consumption Influence of Preheated Air Temperature on High Temperature Air Combustion in Furnace with Swirling Burner: a Modeling Study Study on Mathematical Simulation of Nitrogen Oxides (NOx) Formation of Coal-Fired Boiler Comparative Analysis of Electric Power and Steam Loss Rate between Single Flash and Binary Geothermal Power System with Single Screw Expander The Relationship between the Wall Temperature and the Boiling Rate of the Biomass Boiler Economizer and Calculation Program Design Application and Analysis of Wavelet Transform and Edge Detection in Critical Heat Flux of Natural Circulation Experimental Investigation on Flow Patterns of Cylindrical-Conical Spout-Fluidizing Bed Research Based on the Mid-Point Enthalpy of Supercritical Unit Feed-Water Control Circuit Study on Reasons of Frequent Outfire in a Boiler with Horizontal Concentrated Burners Numerical Simulation of the Heat Transfer Performance in Heat Exchanger Inserted by Disturbance Device Numerical Investigation of the Effect of Waste Heat Extracting Location on Temperature Distribution Catalysis Reduction of NO and HCN/NH3 during Reburning: a Short Review Combustion and Heat Transfer in 300MW Oxy-Fired CFBB The Design of Coarse and Fine Regulatory Arc Suppression Coil Investigation on the Combustion Rate of Carbon Particle in Pressurized Oxygen-Enriched Conditions The Characteristics Evaluation of Swirl Burner Based on the Numerical Simulation Experimental Investigation and Comparison on Fin Surfaces Performance of Flat Tube Heat Exchangers Study on Performance of High Low Temperature Radiator Group by a Combination Method A Novel Method for Analyzing the Thermodynamic System of Thermal Power Plant with Double Reheat Cycles Optimizing Design of Direct Air-Cooled Condenser Experimental Study on Microstructure of Fly-Ash from Circulating Fluidized Bed Boilers Chapter 3: Power Machinery and Engineering Combustion System Optimization of a Gasoline Direct Injection Engine Research on Zero Release Closed Cycle Diesel Engine System A SOA-Based Power Quality Management Platform Dynamics Simulation of the Crank and Connecting Rod Mechanism of Diesel Engine The Design of HCNG Engine Fuel System with Making Hydrogen by Sliding Electric Arc Research on Stress Field of the Steam Turbine Rotor Based on SVM and the Finite Element Analysis Model Analysis of Car’s Body-in-White Based on FEA Fault Diagnosis for Wind Turbines Based on Vibration Signal Analysis Research on Combustion Characteristics and Emissions of Methanol-Diesel Fuel with Different Additives Experimental Investigation on Atomization Characteristics of a Certain Type of Aero Engine Fuel Nozzle Modeling and Simulation of Marine Diesel Propulsion System in Ship Maneuvering Condition Preparation and Properties of Sm2Zr2O7 Ceramics for Thermal Barrier Coatings by APS Numerical Analysis of Stress Field in Heavy-Duty Gas Turbine Inlet Elbow System Experimental Study on Atomization Characteristic of Fuel Injector of Heavy-Duty Gas Turbine Study on the Methanol Percentages Effect on Combustion and Emission of DME/Diesel Blended Fuel Modeling Spray Formed by Spring Nozzle Using Volume-of-Fluid Method Simulation of Low NOx Combustion with Heating Fuel in Diesel Engine Research on the Combustion and Emission Characteristics of Lean Burn CNG Engine Simulation of Urea-SCR Catalytic Converter for Diesel Engine Research on Emulsified Fuel Applied to Engine YC6J190 Research on Effect of Nozzle Structure Parameters on Performance of Common Rail Diesel Engine A Novel Ultrasonic Motor Using Longitudinal Vibration of Bar with Varying Section 3D Finite Element Analysis of High-Pressure Common Rail Diesel Engine Connecting Rod Study on Theoretical Design and Simulation of a Tuned Frequency Muffler Numerical Study on the Quasi-Dimensional Model of Diesel Engine for Performance Optimization Cutting Stiffness Analysis of a Gearbox’s Back Case Based on FEA Experimental Research on the Performance of High-Speed Diesel Engine Fuelled with Emulsified Fuel Blend of HFO & Light Diesel Chapter 4: Fluid Machinery and Engineering Numerical Simulation of Turbulent Mixing for Dislocated Blades in a Stirred Tank Study on the Flow Field of Jet Plug-in Hot Blast Furnace Research of Simulation Model for Non-Linear Turbine Regulating System Liquid Film Features Analysis on Mechanical Seals with Micro-Pore Face by CFD Deposition Process of Droplets Impacting on a Horizontal Surface Modeling and Stability Analysis of the Speed Regulating System of a Planetary Mixer Numerical Simulation of Gasoline Blending in a Cylindrical Tank Agitated by Side-Entering Agitators Lattice BGK Study on Flow Pattern in Two-Dimensional Wall-Driven Semi-Circular Cavity 3D Geometry Modeling for the Entire Flow Passage of Francis Turbine with Long and Short Blades Based on Pro/E CFD Study of the Mixing of Pseudoplastic Fluids with Yield Stress in a Two-Staged Stirred Tank Time Evolutions of Water Drops Impacting on a Rotating Disk Analysis on Effects of the Blade Wrap Angle and Outlet Angle on the Performance of the Low-Specific Speed Centrifugal Pump A Study on the Mechanism of Bottom Hole Hydraulic Pulse Increasing Drilling Rate Disscusion of Underwater Aeration Machine Hydraulic Elastic Vibration Analysis of Hydraulic Turbine Blade Improving the Efficiency of a Hydro-Turbine System by Vortex Generators Study on the Filtering Key Technology of Acrylic Solution Based on Polyflow Numerical Study on Throat Tube Inlet Function of Pulsed Liquid Jet Pump Computational Fluid-Structure Dynamics Coupling Research of Flexible Wing Numerical Simulation and Experimental Study on Deep-Well Centrifugal Pump with Small Rear Shroud Diameter Numerical Simulation on the Pressure Field of Gas Knives Design and Test for High Specific Speed Mixed Flow Pump with Volute Aerodynamic Mechanism Research of Flapping Flight Research on Cushion of Boom Cylinder in Hydraulic Excavator Research on Flow and Heat Transfer Characteristics In Micro Heat Exchanger Numerical and Experimental Studies on the Supersonic Coaxial Jet Mixing A CFD Study of an up- and a down-Pumping PBT Impeller in Solid-Liquid Stirred Tank Chapter 5: HVAC, Air Conditioning and Refrigeration The Effects of Biological Agents on Survival, Biomass and Foliar Nutrient Concentrations of Mongolian Pine (Pinus sylvestris var. mongolica) Seedlings Planted on Keerqin Sandy Lands, China Research on the Absorption Characteristics of Activated Carbon Prepared by Biomass The Measured Analysis of Residential Kitchen Pressure Changed Exhaust Pipe System Characteristics Evaluation of Thermal Comfort in an Air Conditioning Room Using a CFD Model Dynamic Exergetic Cost Analysis of a Space Heating System Kitchen and Toilet of the Residence Exhaust Flow Field Analysis Heat Transfer Enhancement and Pressure Drop for R417A Flow Boiling in Internally Grooved Tubes The Energy Conservation Research of the Environment Chamber Based on the Total Heat Exchanger Optimal Piping Design for Enhanced Energy Saving in District Cooling System – A Case Study Experimental Study on Condensation of R134a inside Horizontal Inner-Micro-Fin Tubes Recent Status and Development in Researches on Ground-Coupled Heat Pump System Ground-Source Heat Pump Performance Analysis Based on Building-Integrated Renewable Energy Demonstration Projects Optimization of a Solar-Driven Absorption Refrigerator Operating between Four Temperature Levels Conduction Characteristics of Frosting Circumferential Fin of Rectangular Profile An Analysis and Evaluation on Adaptability of Wall-Hung Mounted Gas Boiler between Indemnificatory Residential Buildings in Beijing An Online LS-SVM Prediction Model of Building Space Cooling Load Thermoeconomic Optimization of a Seawater Source Heat Pump System for Residential Buildings Simulation of Solar Assisted Ground Source Heat Pump System in Different Regions A Comparative Application of MKP Method to Identify Hydraulic Condition of Complex Heating Network with Multi-Heat Sources and Multi-Loops The Performance Improvements of a Ground-Coupled Heat Pump System for both Building Heating and Cooling Modes Study on Expander-Auxiliary Compressor Unit Used in Refrigeration System Design and Performance Study of a Novel Refrigeration System Solar Assisted Heat Pump System for Floor Heating Chapter 6: Power System and Automation Calculation for Thermal Parameters of Steam in the Flow Passages of 1000MW Turbine under Variable Operating Conditions Analysis of the Matching Performance of Supercharged Boiler and Turbocharged Set Regression Test of Stainless Steel Stamping Well-Pump Based on Numerical Simulation The Optimal Operation of Thermal Power Plant Auxiliaries Based on Mixed Integer Programming The Power Quality Analysis and its Enhancement Scheme in Power Distribution of an Automobile Factory Study of Electric Power System Neutral Point Grounding Using PSCAD/EMTDC Proposal and Preliminary Study on Installed Capacity Margin Exponential Stability Analysis for Neutral Stochastic Delayed Neural Networks Research on a Current Direct Control Method The Influence of Changes of Soil Parameters for Potential Distribution along the Earth's Surface under 3d Combined-Layer Soil Model Research on Model and Algorithm of Islanding Based on CSP Considering DG A Data Placement Strategy for Data-Intensive Cloud Storage Study on Switching Operation in the Simulation and Training System in the Intelligent Substation Research on the Speed Control of Automatic Train Operation System Based on the Novel PSO-B-BP-PID Controller Classification for Short Duration Disturbances Based on Row-by-Row Similarity of Generalized S-Transform Modulus Matrix The Simulation Platform of 10kV Distribution Network Based on PSCAD/EMTDC Meteorological Factors Considered Load Decoupling Forecasting Techniques The Development of Software of Self-Healing Analysis Base on the Analysis of Power Supply Path in Regional Power Network Study on the Supporting System for Smart Grid Control Center Research on Communication Method for the Coal Mine Drainage Control System Root-Cause Analysis Based on Time Delay Estimation for Alarm Systems in Power Grids The Application of Fuzzy Control in Automatic Electronic Oven Studies on the Estimation of Transformer Winding Parameters Study of the Operational Characteristics of Isolated Grid Fed with Hydro Generators, Diesel Generators and Photovoltaic Power Station Analysis of Performance of Several Types of Classical Controller in Automatic Generation Control for an Interconnected Power System Based on the BP Neural Network-PID Series Control Boiler Main-Steam Temperature System Research A Mixed H2/H8 Based LMI Algorithm for Damping Inter-Area Oscillations Research on High Order Resonance Hybrid APF Research of Lithium-Ion Battery Sorting Method Based on Fuzzy C-Means Algorithm Research on Voltage Stability in Grid-Connected Large Wind Farms Blocking Analysis of HVDC Caused by DC Voltage Divider with OPDL System A Design of Li-Ion Battery Formation System Based on ARM Embedded Computer Improved Bacterial Colony Chemotaxis Algorithm for Distribution Network Planning Research on the Generation Expansion Planning in Carbon Market in China The Application of the Complex Modulation Zoom-FFT Based on Complex Analytical Bandpass Filter in Interhamonic Detection of Power System Simulating Research on a New Current Controlling Method Transformer Fault Diagnosis Based on Gene Expression Programming Classifier The Service Restoration in the Distribution System with Distributed Generators Based on the Heuristic Multi-Agent Evolutionary Algorithm CMA the Key Equipment for Condition Monitoring in Power Transmission and Transformation System The Setting Method of Matching Coefficient for PSS2B Model of IEEE Research on Models and Compensation Mechanism of Energy-Saving Generation Dispatching Spinning Reserve Optimization Model Based on Bi-Level Programming Measurement Based on the "Group Linear Regression Method" of Harmonic Impedance Improvement and Application of Genetic Algorithms in Reactive Power Optimization of Power Network Forecasting Method of Branch Power of the Urban Power Grid Based on Multi-Model Technology Comprehensive Evaluation of Power Transmission and Transformation Project Based on Improved Radar Chart The Research on Power System Design and Calculation Visualization in Mine Research on Protection for Distributed Generation Access to Distribution Network Risk Assessment of Power System Cascading Failure Considering Hidden Failures and Violation of Temperature Fault Location in Distribution Systems Considering the Non-Liner Profile Characteristic of Voltage Sag on the Bus Application of Intellectual Shuttle in AS/RS System Optimal Capacitor Allocation Based on Fuzzy Inference and Fuzzy Multi-Objective Programming in Distribution Network Research on the Properties of Copper-Clad Steel in Substation Grounding Project A Data Transform Model for Intelligent Substation and Production Management System Device Online Monitoring Cross-Regional Power Grid and its Interconnected Benefit Analysis Extension Control and its Application in Power System A Comparison of Short-Circuit Current Decaying Calculation between PSS/E BKDY and Computational Curve The Research of Wind-Light Complementary Based on Pumped Storage Power System The FrameWork of Voltage Stability in Multi-Infeed AC/DC Power System Design of CAN Node in Li-Ion Battery Formation and Test System Based on DSP Method of Safety Assessment about the Electric Power Supply Company Based on Cloud Gravity Center Theory Research on the Formation and Preventive Measure of Scale in the Cooling System of HVDC Converter Valve Study on Operation and Control on the Hulunbuir Island Grid Study of Rough Set-Based Taste Signals Identification Research of Battery Fault-Simulation on Primary Electrical Power System Study on Simulation and Training System in Intelligent Substation Chapter 7: High Voltage and Insulation Technology Optimization and Application of Bearing Support for Output Shaft of C-EPS The Research on the Method of Feature Selection in Support Vector Machine Based Entropy Applications of Electromagnetic Methods in Selecting Ground Sites for Ultra High Voltage Power Plant Experimental Study on the Breakdown of Gaps in Fire Study on the Insulation Coordination of ±800kV Converter Station in the Nuozhadu to Guangdong HVDC Power Transmission Project Measure Characteristic of UHV Power Frequency Voltage Ratio Standard The Analysis of the Opto-Couplers Relay Malfunctions in HVDC Control and Protection and the Improvements of the Trip Circuits Sources and Treatment of the Particulate Pollutant in the Transformer Oil Laser-Triggered Surface Flashover Characteristics of Al2O3 in Pulsed Voltage Identifying Power Equipment Partial Discharge Signals via Pulse Appearance Frequency, Duration, and Pulse Polarity Measurements and Classifications of PD Pulse on HDPE Specimens during Degradation Chapter 8: Electrician Theory and New Technology Numerical Simulation on Temperature Field of CFST Member under Solar Radiation Heat Transfer in Narrow Rectangular Channels with Rib Turbulators Study on Direct Torque Control Applied in the Electrical Propulsion Ship Research and Discussion on Data Processing of the Temperature Rise Test for the Motor Winding Parameter Calculation of Brushless Doubly-Fed Machine Based on the Genetic Algorithm Theoretical and Experimental Results of DC and AC Magnetic Flux Transformation Using HTS Superconducting Closed Loop Reliability Prediction of Products Based on Generalized Closeness Degree Research on Standard Device for Power Frequency Lines Parameters Tester Based on the Technology of Virtual Complex Impedance Fuzzy Multiple Reference Models Adaptive Control of Induction Motors Two-Dimension Fault Line Selection Method Based on Transient Signal Features of Fault Phase Applied Research of Grey - Fuzzy Algorithm in the Fire Detection Chapter 9: Power Electronics and Power Drives The Particular Phenomenon of Pulsating Heat Pipe during its Operation Process The Effects of Variable Specific Heats of Working Fluid on the Performance of Irreversible Reciprocating Brayton Cycle Investigation on a Novel Four-Quadrant Power Electronic Transformer The Design and Simulation of APFC Circuit in High Power Factor Switching Power Supply Measurement of Harmonic Impedances of Supply Systems Using Natural Disturbances Co-Biodegradation of Multiple Monocyclic Phenolic Compounds by a Novel 2,3-Xylenol-Degrading Pseudomonas Isolate An Adaptive Hysteresis Band Controller for Single Phase PV Inverters A Grid-Connected Control Strategy of NPC Three-Level Inverter for Direct-Driven Type Wind Power Generator Research on High-Power Power Factor Corrector of Power Electronic Transformer Analysis on Performances of Matrix Rectifier under Abnormal Conditions A Study of Topology Based on Matrix Rectifier and AC Chopper Principle Single Stage Push-Pull Forward Inverter of PV Power Source The Research of Current Ripple on Interleaving Parallel High-Frequency Rectifier Research on Minimum Switching Losses of Three-Level PWM Rectifier Wind Power System Based on Multilevel Matrix Converter Design of Main Parameters for the Main Circuit of Soft-Witching Inverter Modeling and Simulation of Single Phase Inverter with Dynamic Phasors Microbial Screening Strategies for Biodegradation of Monocyclic Phenolic Compounds Nonlinear Lyapunov-Based Stable Control Method of the Single-Phase Shunt Active Power Filter High Power Inverter Circuit from GTO to IGCT and its Application on AC Driving Locomotive Research of Isolated Three-Level AC-AC Converter The Application of Improved HHT to Harmonic Analysis and Fault Detection of Power System


Best Sellers


Product Details
  • ISBN-13: 9783038137474
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3038137472
  • Publisher Date: 07 Oct 2011
  • Binding: Digital download and online
  • No of Pages: 1484


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Progress in Power and Electrical Engineering
Trans Tech Publications Ltd -
Progress in Power and Electrical Engineering
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Progress in Power and Electrical Engineering

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!