Home > General > Advanced Development in Automation, Materials and Manufacturing
Advanced Development in Automation, Materials and Manufacturing

Advanced Development in Automation, Materials and Manufacturing

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

Collection of selected, peer reviewed papers from the International Conference on Mechatronics, Materials and Manufacturing (ICMMM 2014), August 2-4, 2014 Chengdu, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 145 papers are grouped as follows: Chapter 1: Advanced Materials Engineering and Processing Technologies; Chapter 2: General Mechanical Engineering and Applied Mechanics; Chapter 3: Instrumentation, Measurement Technologies, Analysis and Methodology; Chapter 4: Electrical Engineering and Designing of Circuits; Chapter 5: Mechatronics, Control and Automation of Manufacturing; Chapter 6: Communication, Processing of Signal and Data, Information Technologies; Chapter 7: New Technologies, Methods and Technique in Resources and Civil Engineering; Chapter 8: Product Design and Industrial Engineering

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Advanced Materials Engineering and Processing Technologies Extraction of Aluminum from High Iron Bauxite by Carbothermal Reduction-Ammonium Sulfate Roasting Effects of PMN Volume Fraction on the Damping Properties of 1-3 Piezoelectric Damping Composites Experimental Study on the Lateral Compression and Energy Absorption Characteristic of Steel Tube Filled with Polyurethane Foam Research on the Anti-Penetration Performance of Aluminum Foam Sandwich Plate Acoustic and Thermal Properties of Polymer Composites Reinforced with Lignocellulosic Fibers Synthesis of ZnO Microspheres with Different Morphologies and their Comparison of Gas Sensing Performance Synthesis and Characterization of Epoxy Resin Reinforced with Luffa Fiber Composites for Sound Absorption Advanced Ceramics: Some Challenges and Solutions in Machining by Conventional Methods Crystallization of Aluminium Alloys Influence of the Amount of Recyclate and Regranulate Senosan on Tensile Properties of the Material Starex Strain Rate Effect on the Mechanical Properties of Recycled Wood Particles/ Epoxy Composites Perceived Roughness of Material Surfaces Study on Gel Time for Electrorheological Materials Applied to ER Automatic Clutch A Study on the Phenomenological Constitutive Model of Mg-12Gd-5Y-3Zn-0.6Zr Magnesium Alloy Forming at Elevated Temperature Electrochemical Corrosion Behavior of AZ80 Magnesium Alloy Tube Fabricated by Hydrostatic Extrusion Research on Affecting Factor of Preparation of Calcium Sulfate Whisker with FGD Gypsum Research Status of Flexible Substrate Transparent Conductive Effect of Quenching Temperature and Medium on Properties of TiO2 Nanotube Arrays in DSSC Affect of Interactions between FM/AFM in La5/8Ca3/8Mn1-xCoxO3 System on the Magnetic Properties Evaluation of Interface Performance by Means of Dynamic Electrochemical Impedance Spectroscopy Interface Characterization and Materials Flow Pattern Analysis for Friction Stir Welding Overlap Joints of Mg/Al Dissimilar Alloys Characterization of Fe2O3-CaO-SiO2 Glass Ceramics Prepared by Sol-Gel The Chemical Compositions and Origin Characters of Serpentine Jade from Different Deposits Effect of Wire Materials on Cutting Performance of WEDM for Machining of Inconel Superalloy Growth of Rutile TiO2 Nanorods by Chemical Bath Deposition Method on Silicon Substrate at Different Annealing Temperature A Study on Effect of Beginning V Concentration in TD Process Experimental and Numerical Simulation of Multipass Hot-Rolling on 7150 Aluminum Alloy Performance Study Analysis of Inflaming Retarding Viscose of Clothing Material Investigation of the Corrosion Mechanism of A3 Steel by Ammonia Nitrogen Metabolites of Crassostrea Rivularis Research Progress of W/ZrC Ultra-High Temperature Cermets Exchange Bias of the Fe/Fe3O4 Coated Ag/Hollow Glass Microspheres Fluorine Doping Effects on the Electric Property of BiFeO3 Thin Films Research on the Influence Factor and Improving Measures of Machining Accuracy Electrical and Magnetic Properties of Multiferroic BiFeO3 Ceramics Prepared Using Sol-Gel Derived Fine Powders Effect of Co-Solvent on the Solubility of Ginger Bioactive Compounds in Water Using COSMO-RS Calculations Chapter 2: General Mechanical Engineering and Applied Mechanics Kinematic Optimization of Transplanting Mechanism with B-Spline Curve Gear for Rice Pot Seedling Based on Matlab Creep Analysis of Combined Bolted Flange Joints under High Temperature Numerical Study of the Effects of Joint Interface on Two Cylinders Analysis of Microstructures and Mechanical Properties of Two Hot Dip Galvanized Dual-Phase Steels with Different Alloy Systems Torque Analysis and Simulation Calculation of Flying Fixed Canard Design of Space Sliding Rails and Mechanical Analysis Eulerian Description of Rail Straightening Process Review of Pressurized Vessel Structural Design – An Assessment of Total Life Structure Design and Flow Field Simulation of Magnetic Liquid Suspension Centrifugal Blood Pump Experimental Study on Cross Section Lateral Compression Energy Absorption Characteristics of Three Types of Steel Tubes Aerodynamic Characteristic Analysis of Two-Dimensional Trajectory Corrector Projectile in Mortar Static and Dynamic Analysis of Annular Sector Plates Subjected to Arbitrary Boundary Conditions The Quantum Conditions of One Dimension Potential Well Based on WKB Approximation Method The Simulation Research of Tool Wear in Small Hole EDM Machining on Titanium Alloy Multiaxial Fatigue Life Prediction of the CII Platform Leg Based on Critical Plane Energy Method Numerical Study of Marangoni Convection around a Single Vapor Bubble during Pool Boiling The Buckling Mechanism of Square Tube Subjected to the Impact of a Mass Structural Design and Finite-Element Analysis of Packing Seal with Self-Adaption and Resilience Numerical Analysis on Droplet Deformation and Breakup in High Gravity Field Experiment Verification of Equivalent Model for Vibration Analysis of Honeycomb Sandwich Structure Flow Mechanism and Hydrodymanic Characteristics of 3D Cavity on the Surface of the Underwater Vehicle Vehicle Dynamics Modeling Based on Vortex Theoretical and Numerical Analysis on the Static-Loaded Contact Pressure of Mechanical Elastic Wheel Shock Absorber Using Hydraulic System and Shape Memory Alloys Experimental Modal Analysis of a First Stage Blade in ALSTOM Gas Turbine Load Analysis and Structure Design of Small-Scale Maglev Wind Turbine Chapter 3: Instrumentation, Measurement Technologies, Analysis and Methodology Thermal Lens Microscopy: Characterization and Optimization Effect of Scanning Depth of Field on the Measurement Noises of Developed Fringe Projection 3D Scanning System Analysis of Spindle Rotary Precision Based on Two-Point Methods Experiment of a Flat Plate Solar Water Heater Collector with Modified Design and Thermal Performance Analysis Determining the Exact Value of the Shape Deviations of the Experimental Measurements SAR Image Recognition via Local Gradient Ratio Pattern The Research on Underground Millimeter-Wave Detection System Design of LIDR Monitoring System Based on GPRS The Method to Calculate the Length of the Catenary for Anchored Vessel Characteristic of Low Calorific Fuel Gas Combustion in Porous Burner by Preheating Air Failure Prediction Analysis on the 172 Basic Plane Based on Grey Theory Chapter 4: Electrical Engineering and Designing of Circuits Research on Teaching Aid of Analog Circuits Based on Magnetic Element Design of Fitness Device with Power Generation and Multi-Function Identification of Coefficient of Self Inductance The Design of Multiplier in Integrated Circuit Based on Low-Power Algorithm Design Methodology of ALU Based on Resource-Sharing Reliability Analysis and Optimization of Constant Current Remote Power Feeding System of Seafloor Observatory Network Study on Access System of Low Voltage Distributed Photovoltaic Power Station Research on the Design Method of Self-Repairing Digital Integrated Circuit Based on Embryonic Cellular Array Research on Human Implantable Wireless Energy Transfer System Research of Novel Phosphor Membrane Packaging Technology for LED Illuminant Chapter 5: Mechatronics, Control and Automation of Manufacturing Modeling and Simulation of Omni-Directional Mobile Robot with Mecanum Wheel Neural Network Solutions for Forward Kinematics Analysis of 2-(6UPS) Manipulator The Research for Control of the Laser Beam Trajectory on Surface Hardening Using NC Design of Control System for Knuckle Boom Crane Design of Map Positioning and Navigation System Based on Mobile Platform Injection Speed Control of Precision Injection Molding Based on CMAC Neural Network Structure and Control on FSM Subsystem in Precision Tracking Study on Optimal Method for PID Parameter Based on Artificial Bee Colony Algorithm A Study on Nonlinear Decoupling Controller for UPFC Research of Constant Pressure Water Supply System Based on PLC Research on Artificial Intelligence Technology of Electrical Automation Control Research on Modeling Methods of Nonlinear Black Box Survey and Forecast on Scheduling of Networked Control System Research of BD/GPS Hybrid Positioning Module Based on ARM and GPRS Research on the Electronic System Design of the Automobile Based on PLC and MPC Design of Reverse Sensor Based on Solar Power Chapter 6: Communication, Processing of Signal and Data, Information Technologies The Voice Activity Detection Algorithm Based on Spectral Entropy and High-Order Statistics Testing Based on Empirical Likelihood for Partially Linear Models with Instrumental Variables Modeling Based on Combinatorial Optimization Multi-Target Data Association and Bonic Algorithm Comparative Analysis of Determinant Elimination Method, Ant Colony Algorithms and Genetic Algorithm Shuffled Frog Leaping Applied to Optimal Deployment of Radar Network Cultural Shuffled Frog Leaping Algorithm and its Applications for the Radar Network Deployment Research on Path Optimization of Urban Traffic Guidance System The Research of Model-Driven Architecture in the Embedded System Application and Research of Weighted Wireless Network Node Load Evaluation Method Based on Network Contribution Degree Research on Routing Protocol for Wireless Sensor Network Fuzzy C-Means Image Segmentation Algorithm Based on Chaotic Simulated Annealing Virtual Training System of Special Equipment Operation Based on Virtools The Minimum Weight Dominating Set Problem under Hybrid Uncertain Environments The Optimization of Association Rule Algorithm in Data Mining Research on Distributed Heterogeneous Data Storage Algorithm in Cloud Computing Data Center Study on Path Optimization Method of Urban Traffic Flow Guidance System Based on Internet of Things Design of Infrared Communication System Based on Phase-Locked Loop Frequency Modulation Study on Path Optimization Method of Traffic Guidance System under the Condition of the Car Networking Chapter 7: New Technologies, Methods and Technique in Resources and Civil Engineering The Water Absorption Rule of Vertical Fractured Well Stability Study on Jointed Rock Mass Affected by Fissure Water Pressure Study on the Infiltration Rule of Expansive Rock Canal Slope GPS Application in Ginkgo Landslide Monitoring Mechanical Properties Analysis of CFRP Pre-Stressed Section Continuous Thin-Walled Box Girder Bridge Models 22 Study on Cracking Resistance of Concrete Reinforced with Rib Stiffened Steel Plates Renewable Energy Sources Used to Supply Pre-School Facilities with Energy in Different Weather Conditions Application of Cubic Spline Interpolation Method for Track Profile Irregularity Adjustment Construction Technology for Deep Foundation Pit Support in Mining Area Influence of Silt Soil Layer on the Space Seismic Design Response Spectrum The Deflection of Orthotropic Saddle Membrane under the Snow Load Two-Parameter Parabolic Mohr Strength Criterion Applied to Analyze the Results of the Brazilian Test The Co-Existence and Openness of Green Building Design from the Perspective of Complex Science Statistical Analysis for Platform Height Ratio of Horizontal Components in Bedrock Seismic Oscillation Velocity Response Spectrum Comparative Analysis of Wind Speed in Ventilation Hole Simulated by VOF and Euler Model Design of a New Flexometer for the Safety Monitoring System of Bridge A Novel Fracturing Fluid System with Ultra-Low Concentration and High Temperature Resistant Application of Numerical Simulation Technology in the Large Space Air-Conditioned Buildings Air-Conditioned Buildings Research on Foundation Stability of Building Based on Foundation Bearing Capacity Research on Innovation of Urban Sewage Treatment System Based on Perspective of Energy Conversion Blended Polypropylene Fiber of Various MFR via a Melt-Blowing Device for Oil Spill Cleanup Chapter 8: Product Design and Industrial Engineering Single Machine Scheduling and due Date Assignment with Past-Sequence-Dependent Delivery Times and General Position-Dependent Processing Times A Theory of Hierarchy-Gray for Purchase Decision Support Systems Research on the Key Technology of Manufacturing Services Modeling under Cloud Manufacturing Environments A Predicting Model for Demand Quantities of Downstream Manufacturer Study on Sales System with Demand Affected by Delivery Lead Time Accounting Information Systems Development (Subsystems: Production Process in XYZ Ltd) Design Coal Conveying Simulation System Based on Field Bus Power Plant The Optical Fiber Connector Ceramic Insert Core Injection Mold Design


Best Sellers


Product Details
  • ISBN-13: 9783038266099
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3038266094
  • Publisher Date: 18 Aug 2014
  • Binding: Digital download and online
  • No of Pages: 738


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Advanced Development in Automation, Materials and Manufacturing
Trans Tech Publications Ltd -
Advanced Development in Automation, Materials and Manufacturing
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Development in Automation, Materials and Manufacturing

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!