Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advanced Structural Materials, IUMRS-ICA 2010: (Volume 686 Materials Science Forum)
43%
Advanced Structural Materials, IUMRS-ICA 2010: (Volume 686 Materials Science Forum)

Advanced Structural Materials, IUMRS-ICA 2010: (Volume 686 Materials Science Forum)

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

These 136 peer-reviewed papers cover the current understanding of researchers working in the fields of magnesium alloy use, structural composite materials, advanced materials processing technologies, high-temperature coatings, surface protection and aerospace materials. The result is an uniquely helpful guide to the subject. Volume is indexed by Thomson Reuters CPCI-S (WoS).

Table of Contents:
Preface and Sponsors Magnesium Research of Short-Flow-Route Processes for Magnesium Alloys Prepared by Crystalline Magnesium A Morphology Observation of β-Mg17Al12 Phase in AZ80 Magnesium Alloy Subjected to Hot Compression Deformation under Different Conditions Corrosion Behaviour of Mg-7.3Al Alloy in Buffered Chloride Solutions Corrosion Performance Study of Anodic Film Formed by Oxidizing Magnesium Alloy in Environmentally Friendly Electrolyte Corrosion Resistance of Modified Silane Films Formed on AZ31 Magnesium Alloys Direct Chill Casting of Φ500mm ZK60 Magnesium Alloy Billets under Low Frequency Electromagnetic Field Effect of Calcium and Strontium on Microstructure of AZ31 Wrought Magnesium Alloys Effect of Clock Rolling on Microstructures and Properties of AZ31 Magnesium Alloy Sheets Effect of Composite Energy-Field on Microstructure and Properties of AZ31B Magnesium Roll-Casting Alloy Sheet Effect of Cryogenic Treatment on the Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Effect of Processing on Density of Mg-6Zn-0.5Y Alloy Effect of Heating Rates and Loading Rates on Mechanical Behaviors of Magnesium Alloy Effect of Initial Microstructure on Deformation Mechanisms of AZ31 Magnesium Alloy Effect of Melt Superheating Treatment on the Microstructure of as Cast AZ61 Magnesium Alloy Effect of 1% Ce Addition on Microstructures and Mechanical Properties of As-Cast Mg-3.8Zn-2.2Ca (wt.%) Magnesium Alloy Effect of Sr on Microstructure and Mechanical Properties of Mg-9Li-3Al Alloy Effect of the Rolling Process on Microstructures and Mechanical Properties of the Extruded LA91 Alloy Sheet Effect of Zn/Er Ratio on Microstructures and Mechanical Properties of the Cast Mg-Zn-Er Alloys Effects of Annealing Treatment on Texture and Stamping Properties of AZ31 Magnesium Alloy Effects of Gallium Addition on the Microstructure and Electrochemical Properties of Al-Zn-Bi Series Alloy Anode Effects of Microstructural Morphology on Mechanical Properties of Magnesium Alloys Effects of Sr Addition on Mechanical Properties and Microstructure of Mg-6Al Magnesium Alloy Effects of Sr Addition on as Cast Microstructure of AS31 Alloy Effects of Ultrasound on the Microstructures and Mechanical Properties of Cast-Rolling AZ31B Magnesium Alloy Strip Evaluation on Vibration Property of Magnesium Honeycomb Panels Flow Behavior and Microstructural Evolution of ZW61 Alloy during Hot Compressive Deformation Galvanic Corrosion Behavior and Three Protection Techniques of Magnesium Alloy Coupled to A6N01S-T5 Aluminum Alloy in NaCl Solution Grain Refinement of Magnesium Alloy AZ31 by Repeated Cold Rolling and Annealing High Cycle Fatigue Behavior of Gravity Cast AZ91D Magnesium Alloy High Strain Rate Compression Behavior and Constitutive Relation of As-Extruded Mg-Gd-Y Magnesium Alloy High Temperature Deformation Behaviour and Processing Maps of AZ81 Magnesium Alloy Influence of Additive on Structure and Corrosion Resistance of Manganese Phosphate Film on AZ91 Magnesium Alloy Influence of Cl- on Corrosion Behavior of AZ91 Magnesium Alloy in Simulating Acid Rain Influence of Silane on Corrosion Performance of Silane-Modified Acrylate Interpenetrating Polymer Network Coating on Magnesium Alloy AZ31 Interpretation of Crystallographic Morphologies of Precipitates in Mg Alloys with a Secondary CCSL Model Laser Cladding of Ni-Based Alloy on Mg Alloy with Brass Transition Low Cycle Fatigue Behavior of As-Extruded AZ31 Magnesium Alloy Mechanical Behaviors of Magnesium Alloy AZ61 under Different Strain Rates and Heating Rates Mechanical Properties and Microstructure Evolution of AZ31 Magnesium Alloy Sheet Subjected to High Strain Rates Loading of Different Orientations Mechanical Properties and Microstructure of AZ31 Magnesium Alloy under Uni-Axial Tensile Loading Ultimate Strength and Plasticity of Magnesium Alloy under Different Temperatures and Strain Rates Microstructure and Corrosion Resistance of AM60 Magnesium Alloy Modified by Plasma Surface Treatment Microstructure and Mechanical Properties of MgMnAlZnCu High Entropy Alloy Cooling in Three Conditions Microstructure and Mechanical Properties of Quasicrystal Reinforced Magnesium Matrix Composites Microstructure and Solidification Behavior of Permanent-Mould-Cast Mg-9Li-3Al-XSr Magnesium Alloy Microstructures and Mechanical Properties of AJ62 Magnesium Alloy with Y and Nd Elements Microstructures and Mechanical Properties of As-Cast and Extruded Mg-2wt.%Zn Alloy Containing Dilute Content of Misch Metal Microstructures and Mechanical Properties of Heat-Resistant High-Pressure Die-Cast Mg-4Al-6RE-0.3Mn (RE= La, Ce, Pr, Nd, Wt.%) Alloys Observation of Microstructural Refinement in Mg-3Sn-2Ca Magnesium Alloy Containing Minor Sr Effect of Nd Addition on a Mg-Zn-Bi Magnesium Alloy Photocatalystic Cathodic Protection of TiO2 Coating on AZ31 Magnesium Alloy Preparation of Mg-Cu-Y and Mg-Ni-Gd Based Amorphous Brazing Material Research on Corrosion Resistance of AZ91D Magnesium Alloy Coated with Epoxy Resin Research on Heat Transfer during LFEC Processing by In Situ Temperature Measurement Researches on a Composite Extrusion Approach Based on FEM Method and Experiments Solute Distribution and Segregation during Solidification of Mg-6Al Alloys Structure and Magnetic Properties of MgFe2O4 Nanoparticles Prepared by the Low-Temperature Solid-State Reaction Method Study of Aluminum Coating Thermally Sprayed on AZ80 Magnesium Alloy Surface Study of the Microstructure of AZ31B Magnesium Alloy under High Strain Rate Deformation Study on the Corrosion Resistance of Magnesium Alloy AZ81 with Rare Earth Study to Yield and Uniformity of Mn in High-Mn Contained Mg-Mn Master Alloy Prepared by Stirring Cast Superplastic Forming Limit and Instability of AZ31B Sheet The Effects of Al-Ca Compounds on Grain Refinement of Mg-Ca Alloys The Evaporation Effect of Front Keyhole Wall in Penetration Welding with an Electron Beam Influence of Forward Extrusion on the Mechanical Properties and Microstructure of Homogenized AZ80 Magnesium Alloy The Tendency of Oxide Inclusion on Magnesium Alloys Intake Manifold in Tilt Cast Thermal Analysis during Solidification of Mg-4%.wtAl Alloy during Lost Foam Casting Process Thermodynamics of In Situ Formation of Mg2Si and MgO in AZ91D /Flyash Composites Wear Resistance Property of AM60 Magnesium Alloy Modified by Plasma Surface Treatment Structural Composite Materials Phase Equilibria in Co-Rich Co-Al-W Alloys at 1300°C and 900°C A Simplified Method of Synthesis and Purification of 4-Dimethylamino-N-Methyl -4-Stilbazolium Tosylate Effect of Hot Pressing Technology on the Microstructure and Mechanical Properties of ZrO2 Nano-Composite Ceramic Tool and Die Material Effects of Load and Sliding Distance on the Wear Properties of Hybrid Friction Materials Microstructural Model of Enveloping-Core Fiber Distribution of Conifer Wood and Research on Biomimetic Wood Composite Experimental Study on Mechanical Properties of X-Cor Sandwich Fabrication and Properties of Cf/SiC Composites Derived from Polysiloxane Precursor Fabrication of Alumina Composite Ceramics with High Addition of Carbon Nanotubes Model and Maximal Pull-Out Force of Helicoidal Fiber Structure in the Underpinnings of Tumblebug Cuticle Influence of Nano-SiO2 on the Strength of High Performance Concrete Preparation of CNTs/PANi Core/Shell-Structured Nanowires and Improvement of Sensitivity of Chemical Sensors Preparation of Ultrafine White Cement and its Hydration Study on Foaming Behavior of Microcellular PP/Inorganic Powder Composites Synthesis of (3-Mercaptopropyl)Trimethoxysilane-Modified ZMS and Study of the Enhancement of Ammonia-Nitrogen Removal from Water The Thickness and the Inerior Quality of Composite Panel in the Vacuum Assisted Resin Transfer Molding Process Well-Crystallized SnO2 Nanocrystals Homogeneously and Intimately Coated on Multiwalled Carbon Nanotubes by a Simple Surfactant-Free Hydrothermal Method Influence of Carbon Fiber Pre-Treatments on Interlaminar Shear Strength and Fracture Behavior of C/C Composites Advanced Processing Technologies of Materials Effect of the LaNd Addition on Melting Point and Spreading Properties of Bi5Sb8Sn Solder Alloy Numerical Simulation Analysis of Temperature Field on Silicon Carbide Synthesis Furnace Preparation and Properties of Electromagnetic Absorbing of Hollow Ceramic Microspheres Structure and Precipitation of Strip As-Cast and Hot-Rolled by TSCR on Oriented Silicon Steel Study of Roughness for Electroplating of Composite Texture on Material Surface Effect of the Content of LaNd on Physical Properties and Solderability of Zn20Sn6Cu Solder High Temperature Coatings and Surface Protection A Novel Wear Resistant Glass-Ceramic Coating Material A Study on Linseed Oil Modified Waterborne Polyurethane Coatings Corrosion Behavior of High-Strength Pipeline Steel and Coatings in the Simulated Sea Water Environment Effect of Laser Power on the Microstructure of Ni-P Layer Deposited on Aluminum Substrate Evaluation of Burnished Subsurface Mechanical Behavior Using Nanoindentation Fabrication of Ni-Based Composite Coating Reinforced with NbC Particles by Laser Cladding Failure of the EB-PVD TBCs of Rare Earth Zirconates High-Temperature Oxidation Resistance of Electroless Ni-P-ZrO2 Composite Coatings Inhibition Behavior of a Novel Acidification Inhibitor for Steels at High Temperature Investigation of Parameters’ Effect on Segmentation Cracks Formation in Zirconia Coating Microstructure and Oxidation Behavior of Molybdenum Disilicide Coating Prepared by Air Plasma Sprayed Microstructure and Properties of TiAlN Compound Films Fabricated on AZ91D Alloy by Magnetron Sputtering Microstructure Features of Cold-Sprayed NiCoCrAlTaY Coating and its High Temperature Oxidation Behavior Nitrite, Nickel-Free Electrophoretic Coating Phosphating Solution Properties of Oxide Film on the Surface of ZrHX(x=0~2) Properties of Sputtered NiCrAlY Used for Protective Gun Tube Coatings Research on Cavitation and Silt Erosion Resistance of HVAF Coatings Research on Properties of SiC Coating Inert Anode for Aluminum Electrolysis Si-B Co-Deposition Coatings on an Nb Silicide Based Ultrahigh Temperature Alloy Prepared by Pack Cementation Technique Improving the Bonding Strength of Y2O3 Coatings on Steel Substrates through a YOX Adhesion Layer Study of Y2O3/Er2O3 Multilayered Coatings Deposited by Magnetron Sputtering Study on Microstructure of Laser In Situ Formation of TiBX and TiC Titanium Composite Coatings Surface Modification by HVOF Coating of Micron-Sized WC-Metal Powder and Laser-Heating of the Coating Synthesis of (Ni, Co)Fe2O4-Spinel Coating Using High Temperature Oxidation Treatment of Ni-Co-Fe2O3Composite Electrodeposited Coating The Improvement in Oxidation Resistance of Magnesia-Carbon Refractory Bricks by Al4SiC4 The Investigation of the Zirconium Silicate Coatings Prepared by APS Thermal Corrosion Behavior of NiCoCrAlY Coatings Prepared by Different Thermal Spraying Methods XRD and Morphologic Analysis of α-Cristobalite Produced from Silica Mine Waste under Lower Calcination Temperature Aero-Space Materials Effect of Annealing on Structural and Optical Properties of Zr Doped ZnO Film Grown by RF Magnetic Sputtering Tribological Properties of Laser Surface Texturing and Coating Duplex-Treated Surface Influence of Boron Nitride on Tribological Behavior of Nickel-Base Composite Coatings at High Temperature Improvement of the Electrochemical Properties of LiMn2O4 by Doping Rare Earth Element Ce Reconditioning of Electroless Nickel Plating Bath on Magnesium Alloys Mechanical Properties and Strengthening Mechanisms of In Situ (TiB+TiC)/Ti-1100 Composite at Elevated Temperature Enhanced Saturation Magnetization of Nanocrystalline Cobalt Produced by Surface Mechanical Attrition Treatment Microstructure and Magnetic Properties of Hot-Pressed and Hot-Deformed Composite Magnets Produced by Spark Plasma Sintering Method The Interface Investigation and Tribological Mechanism of TiB2-TiC-Ni/TiAl/Ti Functionally Gradient Materials Prepared by FAPAS Process Encapsulating and Manufacture Technology Study of Impact-Resisting, Enclosed Soft Aramid Vesicle Preparation and Characterization of Carbon Fibre Reinforced Aluminium Matrix Composite A New Sand Casting Process with Accelerated Solidification Rate Effect of Structure on the Mechanical Properties of PAN-Based Carbon Fibers during Graphitization Preparation of Polyacrylonitrile High Modulus Carbon Fibers by Catalytic Graphitization Using Boron Characterizations of UV Aging and Atmospheric Corrosion on Epoxy Coated 7A04 Aluminum Alloy Research and Classification of Inflatable Space Vehicle and its Materials


Best Sellers


Product Details
  • ISBN-13: 9783037851678
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Depth: 38
  • Language: English
  • Series Title: Volume 686 Materials Science Forum
  • Sub Title: Selected, Peer Reviewed Papers from Iumrs-ica 2010, 11th Iumrs International Conference in Asia 25-28 September 2010, Qingdao, China
  • Width: 170 mm
  • ISBN-10: 3037851678
  • Publisher Date: 26 Jul 2011
  • Binding: Paperback
  • Height: 240 mm
  • No of Pages: 840
  • Spine Width: 42 mm
  • Weight: 1500 gr


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Advanced Structural Materials, IUMRS-ICA 2010: (Volume 686 Materials Science Forum)
Trans Tech Publications Ltd -
Advanced Structural Materials, IUMRS-ICA 2010: (Volume 686 Materials Science Forum)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Structural Materials, IUMRS-ICA 2010: (Volume 686 Materials Science Forum)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!
    ASK VIDYA