This extensive collection of papers presents new results focussing on advanced nanomaterials and their processing. Volume is indexed by Thomson Reuters CPCI-S (WoS). Over 460 papers have been selected, for this special issue, covering three main fields: Electronic Materials Processing and Fabrication, Development of Functional Materials, and Nano and Structural Materials., These are the essential foundations of the NanoMaterials currently undergoing research and development.

Table of Contents:
Committees Preface Dependence of Thermal-Cycling-Induced Deformation on Passivation Morphology in Plastic-Encapsulated Microelectronic Devices Reliability of Electroplated Sn-37Pb Solder Bumps with Different Under Bump Metallizations (UBMs) during High Temperature Storage Test Temperature Dependence of Dominant Hillock Phases during Electromigration of Eutectic SnPb Solder Lines Electrical Properties of ZrO2 Capacitor Dielectrics Deposited by rf Magnetron Sputtering Role of SrRuO3 Buffer Layers in Enhancing Resistance Changing of Pr0.7Ca0.3MnO3 Films Electrical Switching Characteristics of Nitrogen Doped Ge2Sb2Te5 Based Phase Change Random Access Memory Cell Bump Formation and Flip Chip Processes for RF System-on-Packages Dislocation-Free Shallow Trench Isolation (STI) Chemical Mechanical Polishing (CMP) Process for Embedded Flash Memory Dependency of Electrical Characteristics on Au Nano-Crystal Size for Non-Volatile Memory Fabricated with Au Nano-Crystal Embedded in PVK(Poly(N-Vinylcarbazole)) Layer Thermal Stress Model for Phase Change Random Access Memory Improvement of Surface Morphologies of Ru Thin Films by 2-Step MOCVD Process Using (2,4-Demethylpentadienyl)(Ethylcyclopentadienyl)Ruthenium and Oxygen AEM Study on the Phase Transformation of Nickel Silicides in the Ni1-xTax/Si System Effects of Electroplating Parameters on the Defects of Copper via for 3D SiP Surface Acoustic Wave Device on (AlN/LGS) Substrate Influence of Structural Parameters to Engineer the Band Gaps in Ternary Pnictide Semiconductors - Theory as a Tool Initial Growth Mode of GaN Film on Stepped Sapphire Etching Mechanism of ZnO Thin Films in Inductively Coupled Plasma Growth of Ga-Doped ZnO Bilayer by RF Magnetron Sputtering with Different Atmospheres Fabrication of Flexible CIGS Solar Cell on Stainless Steel Substrate by co-Evaporation Process ZnO Nanowalls and Nanocolumns Grown by Metalorganic Chemical Vapor Deposition Electroless Plated Pd/GaAs Schottky Diode and its Application to Hydrogen Detection Characteristics of Thermal Performance in High Power LED Package with Heat Pipe Deep Level Defects in AlxGa1-xN/GaN Heterointerfaces Grown by Molecular Beam Epitaxy Atomic Arrangement and Formation Mechanism of c-Axis Oriented ZnO Thin Films Grown on p-Si Substrates Characteristics of Self-Aligned InP/InGaAs Heterojunction Bipolar Transistor Assisted by Silicon Nitride Sidewall Effect of Buffer Thickness on the Formation of ZnO Nanorods Grown by MOCVD Improvement of the Reverse Characteristics of Ti/4H-SiC Schottky Barrier Diodes by Thermal Treatments Fabrication of 4H-SiC Planar MESFETs on High-Purity Semi-Insulating Substrates Growth and Characterization of GaN Nano-Column Grown on Si (111) Substrate Using Au+Ga Alloy Seeding Method by MOCVD Multi-Component ZnO-In2O3-SnO2Thin Films Deposited by RF Magnetron Co-Sputtering Comparison of Semiconductor Radiation Detectors for Large Area X-Ray Imaging Interrelation between Strain Relaxation and InxAl1-xAs Compositional Graded Step Buffer Layers on GaAs Substrate Grown by Molecular Beam Epitaxy Characteristics of Al-Doped ZnO Transparent Conductive Oxide Films for Solar Cell Applications Growth and Characterizations of Electrochemically Deposited ZnO Thin Films Iron Nanostructures Fabricated by Electron Beam Induced Deposition and its Magnetic Properties Microstructures and Dielectric Properties of CaCu3Ti4O12 Polycrystalline Ceramics Embossing Lithography on Sticky Thermoset Polymer Using Ni Template Effect of Source Supply Methods on Low-Temperature Preparation of Lead Zirconate Titanate Thin Films Using SrTiO3 Seed Layers by Metallorganic Chemical Vapor Deposition Removal of Slurry Residues in Tungsten Plug during Chemical Mechanical Planarization Piezoelectric Bimorph Microphone with Low Stress Parylene Diaphragm Stable Deposition and Patterning of Metal Layers on the PDMS Substrate and Characterization for the Development of the Flexible and Implantable Micro Electrode Electrical Properties of Lead Zinc Niobate - Lead Zirconate Titanate Thick Films Formed by Aerosol Deposition Process Materials Design with Enhanced Temperature Stability of Resonant Frequency for High Frequency Application Epitaxial Growth and Anisotropic Dielectric Properties of La-Doped Bi4Ti3O12 Thin Films High Quality Epitaxial Pt Films Grown on ?-Al2O3/Si (111) Substrates Electrical/Mechanical Properties of Porous Low-k Thin Films by Using Various Supramolecule Based Porogen Thermal Properties of Cr- and Ni- Silicide Thin Films The Effect of Substrate Temperature on the Formation of ITO Thin Films Dome-Shaped High Power Transformer for Driving A 55 W PL Lamp Effects of CeO2 on the Piezoelectric Properties of PSN-PMN-PZT Composition under Various Alternating Electric Fields Effect of ZnO Buffer Layer on the Structure of TiO2 Thin Film Deposited by Magnetron Sputtering The Growth of Transparent Conductive Al-Doped ZnO Thin Films at Room Temperature Texture Evolution in the Sputtered and Electro-Deposited Cu Thin Films Using EBSD Method Application of Advanced Materials with a Metastable Phase on Functional Devices and Bio-Sensors Preparation and Characterization of SnO2 Thin Film Gas Sensor for NOx Gas for Environmental Monitoring Feasibility of Copper-Base Leadframe Preplated with a Cu-Sn Alloy instead of Ni Annealing Behavior after Ion Shower Doping for the Fabrication of LTPS-TFTs Fabrication of Porous YSZ from ZnO-YSZ Cermet Structural and Mechanical Properties of Low Dielectric Constant SiOC(-H) Films Using MTES/O2 Deposited by PECVD Effects of Firing Temperature and Film Thickness on the Critical Properties of YBCO Film by the '211 Process' Characteristics of SiO2 Film Grown by Atomic Layer Deposition as the Gate Insulator of Low-Temperature Polysilicon Thin-Film Transistors Electronic Properties Carbon Film Using Chemical Process Microstructural Study on the Wear Behavior of Cu-TiB2 Composites for Electrical Contact Materials Study on Light Induced Leakage Current Related to Amorphous Silicon TFT Design Indium Tin Oxide Film Characteristics after Chemical Mechanical Polishing Process with Control of Pad Conditioning Temperature Electrical and Thermal Properties of Platinum Thin Films Prepared by DC Magnetron Sputtering for Micro-Heater of Microsensor Applications after CMP Process Characteristics of Inductive Coupled Plasma with Internal Linear Antenna Using Multi-Polar Magnetic Field for FPD Processing Formation of High Flux Parallel Neutral Beam Using a Three Grid System of Ion Beam during Low Angle Forward Reflection of Ions Nickel-Based Germanosilicide of Heavily-Doped SiGe Films for Low Resistance and High-Temperature Stability Effect of Substrate Texture on Superconducting Properties of YBCO Thick Films Study on the Synthesis and Characterization of PANi/Nano-CeO2 Composites The Effect of Bias Power on the Etching Rate and Uniformity of Silicon Dioxide for N-Slot Inductively Coupled Plasma in TFT Application Surface Modification of Novel Organic-Inorganic Hybrid Dielectrics Using Self-Assembled Monolayers Heartbeat Monitoring Technique Based on Corona-Poled PVDF Film Sensor for Smart Apparel Application Ferroelectric P(VDF/TrFE) Ultrathin Film for SPM-Based Data Storage Devices The Effects of Current Type and Density on Dishing Phenomena in CMP Process Numerical and Experimental Study on Pulsed-Laser Heating Process of ZnO Films Luminescence of MWO4 (M =Ca, Sr, Ba and Pb) Prepared by Solvothermal Reaction A Study on Improved Characteristics of Electric Charge Storage after Thermal Treatment Using Teflon FEP Film The Hydrogen Heat Treatment Effect on Electrical and Structural Properties of a-SiOC:H as Low-k Thin Films A Method for Interpreting V-I Probe in a Capacitively Coupled Plasma Discharge Development of Conductive Ceramic Composites by Preceramic Polymer Hydrogen Plasma Process to Reduce the Eu-Doped Sr2SiO4 Thin Films Effect of Cu Dopant on the Electrical Property of ZnO Thin Films Deposited by Pulsed Laser Deposition Properties of Electrical Conductivity of Amorphous Tungsten-Doped Vanadium Oxide for Uncooled Microbolometers Behavior of Various Organosilicon Molecules in PECVD Processes for Hydrocarbon-Doped Silicon Oxide Films Effect of Hydrogen on Electron Emission Characteristics of MgO for Plasma Display Panel Dispersion of Glass Powder and Characterization of Thick Film for AC Plasma Display Panels Cobalt Thin Film Deposited by Remote Plasma Atomic Layer Deposition Method Using C12H10O6(Co)2 and CpCo(CO)2 Electrical and Electrochromic Characterization of Poly (ethylene-oxide)/V2O5 Xerogel Films Properties of ITO Films Deposited on Plastic Substrate by RF Superimposed DC Magnetron Sputtering Method Aligned Polycrystalline Silicon Array Thin Film by XeCl Excimer Laser Annealing for AMOLED Displays Improvement of Luminescent Properties of Phosphor Powders Coated with Nanoscaled SiO2 by Atomic Layer Deposition Enhanced Luminescence Efficiency for Bi, Eu Doped Y2O3 Red Phosphors for White LEDs Pentacene Organic Thin-Film Transistors with Dual-Gate Structure Prevention of Thin Film Failures for PECVD Amorphous-Si on Plastic Substrate Spherical BaMgAl10O17:Eu2+ Phosphor Particles by Liquid Phase Synthesis Cathodoluminescent Properties of Sol-Gel Derived Gd2O3:Eu Thin-Film Phosphors on Sapphire Substrates Characteristics of Amorphous Indium Zinc Oxide Anode Films on Polycarbonate Substrate for Flexible Organic Light Emitting Diode Optical and Electrical Properties of ITO/Ag/ITO Multilayer Thin Films Deposited by D.C. Magnetron Sputtering Instability of OTFT with Organic Gate Dielectrics Failure Mechanism of Patterned ITO Electrodes on Flexible Substrate under Static and Dynamic Mechanical Stresses Interface Reaction between Fillers and Phosphate Glass for Barrier Ribs in Plasma Display Panel Characteristics of TAG:Ce Phosphor Particles Prepared by Ultrasonic Spray Pyrolysis ITO Contact Properties with Amorphous Silicon for AM-OLED Application Molecular Ordering and the Current-Voltage Characteristics of m-MTDATA Thin Films Microstructure and Electrical Properties of ITO Films Deposited Using Various ITO Targets by Magnetron Sputtering Chemical Durability of Frits Used in Process of Plasma Display Panels Properties of Polymer Light Emitting Diodes with Blue Color on ITO/Glass Substrates Luminance Efficiency of a (La,Tb,Ce)PO4:Eu Phosphor Layer Prepared with Binary Surface Active Organic Molecules Uniform Poly-Si TFTs for AMOLEDs Using Field-Enhanced Rapid Thermal Annealing Characteristics of Pentacene with Different Polymer Gate Insulators for Organic Thin-Film Transistors The Effects of SiO, SiON on IZO Thin Film Deposited by DCMG Method Synthesis and Fabrication of Novel Polymeric/Organic Materials for Micro/Nano-Scale Optical Printed Circuit Board and VLSI Photonic Integrated Circuit Application Post-Annealing Effect of SiON Thin Film in Air Comparison of Natural Type Ia Diamond and CVD Diamond Films by Photoluminescence Luminescent Properties in NIR Region of LaPO4:Er/LaPO4 Core/Shell Nanoparticles Low Temperature O2 Plasma-Assisted Wafer Bonding of InP and a Garnet Crystal for an Optical Waveguide Isolator Preparation and Property of Nonlinear Optical Materials Based on K2O-BaO-TiO2-SiO2 Glasses Investigation of Thermal Measurement Variables in High Power GaN-Based LEDs Preparation and Characterization of 70TeO2-30WO3 Glass Thin Films by Radio-Frequency Magnetron Sputtering Method Detection of Toxic Organophosphate Nerve Agents Using DBR Porous Silicon Chip Formation of Nanocrystallites in the nc-Si Films by Co-Sputtering Aluminium and Silicon Phosphor-Conversion White Light Emitting Diode Using InGaN Near-Ultraviolet Chip Inductively Coupled Plasma Reactive Ion Etching of Ge-SiO2 and SiON Using C2F6 and NF3-Based Gas Mixtures Comparison of Amorphous Selenium and Mercuric Iodide Film for Diagnostic X-Ray Imaging Embodiment and Luminescence Properties of Sr3SiO5:Eu(Yellow-Orange Phosphor) by Co-Doping Lanthanide Fabrication and Characterization of SiO2 Based Waveguide Co-Doped with Si-Nanocrystal and Er3+ Wafer Level Bonding for LED Packaging Using Six Sigma Methodology Patterning of the Self-Assembled Monolayer Using the Zero Residual Nano-Imprint Lithography Ceramic Coatings Deposited from Aqueous Solutions OTS-Templated Cobalt Deposition Using Co2(CO)8 Precursor Surface Characteristic of Ni-Based Amorphous Alloy Membrane for Hydrogen Permeation Growth Kinetics and Formation of Uniform Self-Assembled InAs/GaAs Quantum Dots at Numerical Analysis of Self-Organizing Interconnection Process by 3 Dimensional Flow Dynamics Growth Mode Diagram for the Epitaxial Growth on the Vicinal Surface of Strained Si (001) The Calculation of Adatom Diffusion Process on Si and Ge Surfaces from First-Principles Synthesis of ZnO Flower-Like Nanostructures on GaN Epitaxial Layer by Hydrothermal Process Fabrication of Antireflective Films Composed of High and Low Refractive Index Layers Using Layer-by-Layer Self-Assembly Method Synthesis and Characterization of TMA-A Zeolite Nanocrystals Formation and Optical Properties of ZnSe Self-Assembled Quantum Dots in Cl-Doped ZnSe Thin Films Grown on GaAs (100) Substrates Synthesis and Evaluation of Hollow-Tubular ZnO by Wet Chemical Method Synthesis of ZnO Nanostructures by Thermal Evaporation on Graphite Self-Assembled Nanostructures of Block Copolymers on Random Copolymer Brush Phase Field Study for Self-Assemble of the Second Phase Particles in Coherent Phase Transition Low Temperature Growth of ZnO Nanorod on Various Substrates by Solution Chemical Method Fabrication and Micropatterning of Conducting Polymer Nano-Films for Electronic Displays Synthesis and Nanophase-Separated Morphology of a Diblock Copolymer of Polypentafluorostyrene-b-Poly(methyl methacrylate) by Atom Transfer Radical Polymerization Electrophoretic Self-Assembly of Sol-Gel Derived Silica Microspheres Resistive Switching Characteristics in TiO2 ReRAM with Top Electrode of Co Selectively Formed on SAMs Printed Patterns Local Work Function Measurements on Various Inorganic Materials Using Kelvin Probe Force Spectroscopy Effects of Paraffin Addition on Optical Properties and Self-Assembly of SiO2 Photonic Crystal Influence of Ion Bombardment of Sapphire on Electrical Property of GaN Layer Industrial Applications of Sol-Gel Technology Interface Influence on the Proton-Conductivity of Ordered Mesoporous Silica Membranes Hydrogen-Sensor Prepared Using Proton-Conducting Glass Films Al-Substituted Li[Li(1/3-x/3)Crx-0.05M0.05Mn(2/3-2x/3)]O2 Cathode Synthesized via Sol-Gel Process Direct Formation of Zn-Al Layered Double Hydroxide Thin Films Intercalated with Various Organic Anions through the Sol-Gel Method with Hot Water Treatment Fabrication of Pb-Free Silver Paste and Thick Film Adding Silver Nanoparticles Novel Preparation of Nano-Sized TiO2 and ZrO2 Particles by Nanocasting with Nanoporous SiO2 and Selective Dissolution Sol-Gel Synthesis of GdAlO3 Buffer Layers on SrTiO3 (100) Substrates The Preparation of Fluorescent Nano Dye-Silica Particles by Sol-Gel Process Effect of Colloidal Silica Contents in the Organic-Inorganic Hybrid Coatings on the Physical Properties of the Film on the Metal Surface Electrical Properties BaTiO3 Thick Films with an Interlayer SrTiO3 Thin Films Structural and Dielectric Properties of Screen Printed PZT(70/30) Multilayered Thick Films Effect of Catalyst on the Colloidal Silica Particle Growth in Direct Oxidation of Silicon Synthesis of Silica Aerogel Thin Film from Waterglass Inorganic Aerogel Granules Dried at Atmospheric-Pressure Synthesis and Microstructure of Al2O3-SiO2 Nanoparticles by a Sol-Gel Processing Gas Permeation Properties of Poly(N-Vinylpyrrolidone)/ 3-Aminopropyltriethoxysilane Hybrid Membranes Formation of Spherical and Rod-Shaped TiO2 Nanocrystals Prepared by Reverse Micelle Method Effect of Ni Nano-Powders Addition on the Dielectric Properties of Ba(Ti,Zr)O3 Based Y5V Ceramics Surface Strengthening of Zirconia Toughened Alumina (ZTA) Using Glass Infiltration Technique Mechanical Properties and Fabrication of Silicon Carbide Ceramic by NITE Method Electric Field Induced Metal-Insulator Transition of Vanadium Dioxide Films on Sapphire Substrate Prepared by Inductively Coupled Plasma-Assisted Sputtering Roles of Additives on Crystal Growth Rate of Precipitated Calcium Carbonate Densification Behavior and Microstructure Evolution of SiCf/SiC Composites Incorporated with In Situ Grown SiC Nanowires Preparation of Filling Materials for Antifouling Mineral Paint Using Rare Earth and their Anion Emission Properties Strength and Surface Morphology of Si3N4 Composite Ceramics Coated with SiO2 Gel Hydrothermal Synthesis of Nanosized Titania Photocatalysts Using Novel Water-Soluble Titanium Complexes Facile Synthesis of SiCN Ceramic Foam via Self-Sacrificial Template Method Sintering and Oxygen Ionic Conducting Properties of Bi2V0.9Co0.1O5.5-d Derived from an EDTA-Citrate Precursor Low Temperature Sintering in 95(Na0.5K0.5)NbO3-5LiTaO3 Ceramics Preparation of Ion-Sieve Type (H)[M0.5Mn1.5]O4 (M=Mg, Zn) and their Lithium Adsorption Properties in Seawater Dielectric Properties of Alumina Ceramics in the Microwave Frequency at High Temperature Preparation and Characterization of Cordierite-Bonded Silicon Carbide Porous Ceramics Synthesis and Characterization of Ti3(Al1-n Gen)C2 by a Reactive Hot Pressing of TiCx, Al, and Ge Powder Mixture Thermal Behavior of Carbon Nanotubes in Alumina Matrix Nanocomposites Synthesis of Bio-Glass Ceramics in Na2O-CaO-SiO2-P2O5 System with Fluoride Additives Wear Characteristics of Binary Mg-Al, Si, Zn Alloys Coated by Plasma Electrolytic Oxidation Method Effect of Current Ratio on Plasma Electrolytic Oxide Coatings on Mg-Al Alloy Photocatalytic Properties of Anodic TiO2 Nanotubes Development of Carbon Nanostructures in an Intermediate Prepared from Sol-Gel Process Effects of Deposition Parameters on the Crystallinities of CeO2 and Y2O3 Buffer Layers on Textured Ni Deposited by Magnetron Sputtering Effect of Ceramic Powders on the Reaction Sintering of Ceramic/Metal Mixed Powders Electronic Structure and Defect States of Transition Metal Doped Rutile TiO2 Ceramic Electrode Materials for Electrostatic Chuck Applications Investigation of Scandia Stabilized Zirconia(ScSZ) - Yttria Stabilized Zirconia(YSZ) Composite Electrolyte for Intermediate Temperature Fuel Cells Characteristics of La0.8Sr0.05Ca0.15CrO3 Interconnect Material for SOFC Synthesized by a Modified Pechini Method, USP, and GNP Sealing Properties of Ceramic Fiber Composites for SOFC Application Highly Sinterable Lithium Titanate Powders Fabricated by an Organic-Inorganic Solution Route Effects of MgO Coating on Electrical Properties of BaTiO3 The Effect of Initial Hydration Temperature on the Characteristics of Calcium Hydroxide and Aragonite Precipitated Calcium Carbonate Oxidation Behavior of Tantalum Boride Ceramics Rapid Transformation of a-Alumina Nanocomposite Powders by Microwave Assisted Combustion Simulation and Characterization for the Non-Linearity of Multilayer Ceramic Capacitors with New Equivalent Circuits under Ac-Field Effect of Phase Transformation and Fine Particle Dispersion on Densification of High Purity Nanocrystalline ?-Phase Dispersed a-Alumina Study on the Durability of E-Glass Fiber/Vinylester Resin Composites in Various Environment Prospects of Potential Semiconductor Spin Detectors The Effect of the Geometrical Shape and Size of the Cross Section on the Spin-Polarized Transport and the Giant Magnetoresistance : Finite Element Method Analysis First Principle Calculations of the Magnetic Structures of 3d Transition Metals Doped GaN Structural and Microwave Properties of Fe-Based Nanopowders via Mechanochemical Synthesis Low-Temperature Synthesis of Ordered L10-FePtCu Nanoparticles with High Coercivity Crystallographic and Magnetic Properties of Sm2Fe17N3 Films Grown by RF Magnetron Sputtering Glycothermal Synthesis and Magnetic Properties of YIG/YAG Nanoparticles Magnetic Patterning of the Ni/Cu Thin Film by 40 keV O Ion Irradiation Magnetic Properties and Microstructures of Fe73.5Si13.5B9Cu1Nb3 Alloy Crystallized in Nitriding-Atmosphere Excellent Response of Giant Magnetoimpedance Effect in a Glass-Coated Microwire LC-Resonator Magnetic Properties of Various Thick Co-Fe Circular Dot Arrays Magneto-Optical Properties of Ce-Yttrium Iron Garnet Nanoparticles Dispersed in an Epoxy Resin Factors Influencing the Sensitivity of the CDMPI Sensor Magnetic Properties of Mn-Zn Ferrite Nanoparticles Fabricated by Conventional Ball-Milling Functionalization of Magnetite Nanoparticles for Protein Immobilization Synthesis of Monodisperse FePt Nanoparticles at a Low Temperature The Selective Protein Separations with Polyaminofunctionality on Controlled Silica Coating-Layers of Magnetic Nanoparticles Structure and Magnetic Properties of Nanocrystalline Pd-Co and Pd-Co-Fe Layers Edge Shape Effect on Switching Behavior in a Small Ferromagnetic Pattern Ti-Based Amorphous Alloys and Composites as Potential Candidate Materials for Energy Applications DLC Film Coating on a Lithium Metal as an Anode of Lithium Secondary Batteries Advanced Manufacturing Concepts for Crystalline Silicon Solar Cells: Phosphorous Doping and Contact Opening Process Potential of Cr2AlC Ternary Carbide as Material for Bipolar Plate in PEMFC Growth of Cu(In1-xAlx)Se2 Thin Films by Atmospheric Pressure Selenization of Sputtered Precursors Device Performance of P3HT/C70-Methanofullerene Bulk-Heterojunction Polymer Photovoltaic Cells Thermoelectric Properties of Co1-xFexSb3 Prepared by Encapsulated Induction Melting Nano Composite Membranes of Branched Sulfonated Poly(Ether Ketone Sulfone) and SiO2 for Fuel Cell Application Electrochemical Performance of Activated Carbon Electrode Added with LiCoO2 for Hybrid Capacitor Catalytic Effect of Ti5Si3 on Dehydrogenation of NaAlH4 Novel Low-Temperature Synthesis and Characterization of Lithium Cobalt Dioxide for Lithium Rechargeable Batteries Characterization of Cu(In,Ga)3Se5 Thin Film for Top Cell in CIGS Tandem Solar Cells Application of Anodic Titanium Oxide to Dye-Sensitized Solar Cells Electrodeposition of CdS Nanostructures for Solar Cells Using Nano Imprint Templates Effect of Various Lithium Salts in TEGDME Based Electrolyte for Li/Pyrite Battery Formation of CuIn1-xAlxSe2 Thin Films by Selenization of Metallic Precursors in Se Vapor Microstructure Analysis and Characterization of Li(NiCoMn)O2 Thin Film for Cathode Application Prepared by Li Diffusion on the Ni-Co-Mn Alloy Substrates Effects of Se Atmosphere on the Densification of Absorber Layer Using Cu(In,Ga)Se2 Nanoparticles for Solar Cells Porous Silicon Layer by Electrochemical Etching for Silicon Solar Cell The Activation and Hydrogen Sorption Characteristics of Zr57V36Fe7 Alloy and its Constituent Phases Electrochemical Comparison of Chemically or Physically Modified Natural Graphite Anode for Lithium-Ion Batteries Characteristics of Indium Zinc Oxide Thin Films Deposited by Radio Frequency Reactive Magnetron Sputtering for Solar Cells Application Preparation and Reactivity Test of Nano Size ZnO for Removal of H2S and COS in a Gasified Fuel Gas The Influence of Polymer Content on Electrochemical Properties of Si Electrode Structural and Electrochemical Evaluation of a Si Film Electrode Fabricated on a Ni Buffer Layer The Effect of ZnO:Al Sputtering Condition on a-Si:H / Si Wafer Heterojunction Solar Cells Thermoelectric Properties of Zn4-xSb3 with x=0~0.5 Electrochemical Properties of Al Doped Li(Ni1/3Co1/3Mn1/3)O2 Fabrication of Hybrid Solid Electrolyte by LiPF6 Liquid Electrolyte Infiltration into Nano-Porous Na2O-SiO2-B2O3 Glass Membrane Characteristics of Lithium Polysilicate Electrolyte Synthesized by Sol-Gel Processing Ag Deposition on Si-C Composite Anodes for Lithium Ion Batteries Electrochemical Behaviors of PtRu/CNTs Catalysts Prepared by Pulse Potential Plating Methods The Effect of Oxygen Pressure on the Synthesis of LiNiO2 The Effect of SnOx as the Protective Layer for the Lithium Manganese Oxide Thin Film Performance of Tin Oxide/Graphite Composite Anode for Lithium Ion Battery Preparation and Electrochemical Evaluation of La1-xSrxMnO3 Cathode Material for Zinc Air Secondary Batteries Application Synthesis of Nanosized TiO2-Ag-SiO2 Sols by Modified Sol-Gel Method and their Application for Methane Hydrate Formation A Study on the Effect of Structure and P-Doping of Si Thin Film as an Anode for Lithium Rechargeable Batteries The Reinforcement Destruction Simulation of an Al-Zn Carbon Fibers Composite Fabrication of SiCf/SiC Composite by the PIP Process with Electron Beam Curing Method Low Temperature Sintering of AlN-SiC-TiB2 System for the Fabrication of Continuous Fiber Reinforced Ceramic Composites (CFCC) Study on Thermal Conductivity of Polyetheretherketone/Thermally Conductive Filler Composites Synthesis and Electrorheological Characteristics of Conducting Polymer/Clay Nanocomposites Conductive Sol-Gel Hybrid Materials for Novel Cofactor Regeneration in Biocatalysis Development of Ultrasonic-Polarized Mechanism for Stacking Orientation of Quasi-Isotropy Composite Laminates Impregnation of Eicosane into Polyester Fiber Using Supercritical Carbon Dioxide Fabrication of Metal/Intermetallic Compound Laminate composites by Thin Foil Hot Press Process Single Crystal PMNT/Polymer 1-3-2 Piezoelectric Composites Fabrication of Polymer Nanotubes Using Alumina Template Fabrication and Microstructure Control of Continuously Porous Ceramics with Al2O3-(m-ZrO2) and t-ZrO2 Multilayer Shell Structures and Physical Properties of Multi-Walled Carbon Nanotube-Filled PVDF Thermoplastic Composites Wear Behaviors of Al/Al2O3 Composite Coatings Fabricated by Thermal Spray Process Fabrication of Carbon Nanotube Embedded Nylon Nanofiber Bundles by Electrospinning Synthesis of Polymer/Silica Hybrid Nanocomposites Prepared by the Sol-Gel Method Preparation and Characterization of Multiwalled Carbon Nanotube/Poly(e-Caprolactone) Composites via In Situ Polymerization Effect Of Al2O3 Particle Size on Compressive Behavior of Al Composites The Preparation of Bone-Mimetic Sol-Gel Nanoporous Scaffold of L3-Phase Silica/Hydroxyapatite The Improvement of Chemical and Mechanical Properties of Al/Cu-Coated SiC Composites One Step Synthesis and Consolidation of Nanostructured ZrSi2-SiC Composite and its Mechanical Properties Mechanical Properties and Consolidation of WC-8wt.%Ni Hard Materials by HFIHS and PCAS Materials for Devices in Life Science Applications Strength and Reliability Performance of Hydroxyapatite Coatings on Titania Treated Ti6Al4V Alloy Using Sol-Gel Precursor Preparation of Titanium Oxide Nanotube by Hydrothermal Process Large Area Synthesis of 1-D ZnO Nanostructure Arrays on Zn Substrate via Solvothermal Process Characteristics of Gas Sensors Based on Single-Walled Carbon Nanotube Bundles Treated by Acid Stirring Hydrothermal Synthesis of Noble Metal Loaded Tin Oxide Sol Solution for Gas Sensor Application Control of Microstructures and Textures in Nanocrystalline Fe-50wt%Ni Foil Synthesis of High Concentration Cuprous Oxide Nanoparticles by Modified Polyol Process Large-Scale Synthesis of Polymer-Stabilized Silver Nanoparticles Preparation of Nickel Nanoparticles in Water-in-Oil Microemulsion Chemically Driven Polyacrylonitrile Fibers as a Linear Actuator Morphological Evolution of Silicon Nanowires Grown by Chemical Vapor Deposition Effect of Surfactant on the Morphology of Silver Nanoparticles Chemical Durability and Anti-Microbial Property of Silver-Doped Colloidal Silica Thickness Dependence of the Crystallization of a-Fe2O3/a-Al2O3(0001) Thin Films Grown by Sputtering Fabrication of Nano-Sized Indium Oxide Powder below 50nm by Spray Pyrolysis Process Nano Structured Silica Aerogel Films by Dip-Coating Process Properties of TiC and TiCN Nanoparticles Fabricated by a Magnesium Thermal Reduction Process Preparation and Characterization of CdSe Nanoparticles Synthesized Using the Ultrasonic Irradiation TEM Analysis of Multilayered Co/Cu Nanowire Synthesized by DC Electrodeposition Growth of Carbon Nanotubes by Evaporating Ethanol as Carbon Source The Novel Methods for Preparing Antibacterial Fabric Composites Containing Nano-Material Effects of Concentration of Catalyst Precursors on Carbon Nanostructures A New Insight into the Mechanistic Study on Synthesis of Silica Nanospheres Property of NOx Gas Sensor Using Carbon Nanotube Prepared by Thermal CVD Method Adsorption Characteristics of Uranyl Ions on Carboxymethylated Polyethyleneimine (CM-PEI) / Activated Carbon Composites The Effect of DC Bias Voltage on the Structural and Optical Properties of Hydrogenated Nanocrystalline Si Thin Films Solvothermal Preparation of Nano-Sized CaWO4 Particles Nano-Imprinted Ultrahigh-Density Nanopore Arrays Fabrication of Porous Al2O3 and TiO2 Thin Film Hybrid Composite Using Atomic Layer Deposition and Properties Study Synthesis and Characterization of Bioactive Sodium Titanate Nanotube by Alkali Hydrothermal Treatment Activation and Gas Sorption Properties of Nano-Size Titanium Powder Getters Synthesis and Characterization of PbSe Nanocrystals by a Microchannel Reactor SnO2 Nanostructures Synthesized on Co Substrates Sinterbility and Mechanical Properties of Zirconia Nanoparticles Prepared by Hydrothermal Process Phase Transition of Titania Nano-Materials Controlled by Hydrothermal Method Fabrication of Size Controlled Nanohole Array on III-V Semiconductor Substrate by ICP-RIE Using Nanoporous Alumina Mask Effect of Nanoscale Multilayered Structurization on Hardness and Wear Resistance in Al-Cr-N Coating Carbon Nanotube Gas Sensor Fabricated on Anodic Aluminum Oxide Effect of Adhesive Thickness and Bonding Length on Behavior of Composite Adhesive Joints Subject to Torsion Effect of Cell Size on the Dynamic Compressive Properties of Aluminum Alloy Foams Fatigue Crack Propagation Behavior of Friction Stir Welded 6061-T651 Al Alloy Mechanical Behaviors of Ultrafine Grained Metallic Materials Effect of Vibration during Welding on the Fatigue Strength of Structural Steel Weldments TEM & EBSD Study on Deformation Behavior of High Nitrogen Austenitic Fe-18Cr-18Mn-2Mo-0.9N Stainless Steel Effects of Rough Surface on Contact Depth for Instrumented Microindentation Using Spherical Indenter Effect of Multipass Severe Rolling Process in the API X65 Steel Low Temperature Effects on the Fracture Behavior of Cold-Worked STS 304 Stainless Steel for Membrane of LNG Storage Tank Hertzian and Nanoindentations on EBPVD-Coated Gadolinium Zirconate Thermal Barrier Materials Microstructural Evaluation and Mechanical Properties of Al2O3/ZrO2 Layered Structure with Graded Interlayers Tensile Properties of Friction Stir Welded AZ31B Mg Alloy Influence of Thixoextrusion Parameters on Mechanical Properties of Thixoextruded 7075 Al Wrought Alloy High Temperature Deformation Behavior of M2 High-Speed Tool Steel Fatigue Behavior of Thin Cu Foils for Flexible Printed Circuit Board Difference in Annealing Characteristics of Nanostructured Copper Alloys Processed by Accumulative Roll Bonding Effects of Oxygen on Phase Stability and Mechanical Properties of Quenched Ti-Nb Alloys Assessment of Tensile and Fatigue Damage in 316L Stainless Steel by Acoustic Emission Technique Fatigue Crack Growth of Ultrafine Grained Pure Ti after Severe Plastic Deformation Tribological Characteristics of Coarse and Ultra-Fine Grained Ferrite-Martensite Dual Phase Steel Fabricated by Equal Channel Angular Pressing Microstructural Evolution during Annealing of 5052 Al Alloy Deformed at Cryogenic Temperature Influence of ECAP Routes on the Microstructure and Mechanical Properties of Hot Extruded 3003 Al Alloy Effect of Heat Treatment on the Tensile Properties of Poly-Crystal and DS CM247LC Alloy Effect of Minor Elements on the Grain Boundary Strengthening of a Single Crystal Superalloy RR2072 Effects of Surface Coating on Wear Properties of A356-20vol.%SiCp Composites Change of Mechanical Properties of FM Steels after Thermal Aging Effect of Heat Treatment on Compressive Properties of Open Cell Aluminum Foams Effects of Mischmetal Addition on the Microstructural Characteristics of BCuP-2 Brazing Filler Metal Observation of Dynamic Behavior in Primer-Coated Steel Welding by CO2 Laser Solid State Diffusion Bonding of Titanium Alloys The Heat Treatment Characteristics of Hydroxyapatite Thin Films Deposited by RF Sputtering Effect of Post-ECAP Aging on Mechanical Properties of Age-Hardenable Aluminum Alloys Investigation on the Microstructure of an 11% Cr Martensitic Steel with Titanium Microstructure Changed during Accumulative Roll Bonding of Al/Mg Composite Titanium Alloys Casting for Structural Application The Effects of Processing Temperature and Time on the Surface Properties of Plasma Radical Nitrided SCM 440 Steel Identification of Precipitates Appearing in Al-Li-Cu-Zr Alloy Mechanical Properties of Si3N4 Ceramics Prepared by Nitrided Pressureless Sintered (NPS) Process A Characteristics Study of FeAlCr Intermetallic Compound Manufactured by Osprey Forming Process Effect of Silver Additions on the Ageing Behavior and Mechanical Properties of Mg-Al-Si-Sn-Sr Alloy Characteristics of U and U-7wt%Mo Polycrystalline Foils Cast by Alternative Fabrication Method Thermotransport of Hydrogen in Zr-1.0Nb-1.0Sn-0.1Fe Alloy Development of Environment-Friendly CaO Added AZ31 Mg Alloy Microstructural Evolution in CuAlNi Alloy with Ageing The Effect of Bubbling and AlCuP for Refining Primary Silicon at Al-18%Si Alloy Texture and Microstructure in Ni-W Alloy Tape Manufactured by the Powder Metallurgy Process Formation of Ferrite with Cr Equivalents and Solidification Rates in Mod. (9-12)Cr-1Mo Steels Formation of a Crystalline-Glass Composite in a Cu-Based Bulk Metallic Glass by Using the Cu-Pb Monotectic System MC Carbide Decomposition during Thermal Exposure of Polycrystalline Ni-Base Superalloys Properties of Preferred Orientation of TiO2 Thin Film on Plasma Pretreated Substrate Effect of Heat Treatment on Characterizations of TiCrN Coated Layer by R.F Magnetron Sputtering Microstructure and Mechanical Properties of Mg-Zn-Y Alloys Fabricated by Rapid Solidification and Spark Plasma Sintering Processes Microstructure and Compression Properties of Al-8Fe-2Mo-2V-1Zr Alloys Produced by Extrusion of Melt-Spun Powders Aqueous Dispersion of ZrB2 Powder - Effect of Surface Corrosion and Dispersant Growth Model of Circumferential Outer Diameter Stress Corrosion Crack in Retired Steam Generator Tube of Kori 1 Nuclear Power Plant Effect of Delta Ferrite on Corrosion Resistance of Type 316L Stainless Steel in Acidic Chloride Solution by Micro-Droplet Cell A Study on Corrosion-Resistant Properties of Unleaded Bi-Containing Automotive Epoxy Primers Tribological Behavior and Surface Chemistry Characteristics of Quasicrystal Coatings Electrochemical Interpretation of a Stress Corrosion Cracking of Thermally Treated Ni Base Alloys in a Lead Contaminated Water Application of Taguchi Method for Optimization of Vacuum Plasma Sprayed CoNiCrAlY Coatings Corrosion Protection of Aluminum Data Line in TFT-LCD Using Chemical Conversion Coating Influences of Si, W, and Cu on the Localized and Stress Corrosion of 18 % Cr Austenitic Stainless Steel Effects of Pretreatment on the Etch Pit Formation during the Electrochemical Etching of Aluminum Study on Nickel Ferrite Formation by Using a Simple Method to Simulate Heat Transfer Surface Bonding Strength of Top Coat and its Fracture Mechanism in Thermal Barrier Coatings with Thermal Fatigue The Sliding Wear Behavior of Titanium Carbide Dispersion-Reinforced Steel Fabrication and Characterization of Al-Fe Coating for the Wet-Seal Area of Separator for Molten Carbonate Fuel Cells (MCFC) by the Laminating of Al Foil Surface Modification and Heat Treatment of Ti Rod by Electro Discharge Corrosion of Silicate Glasses and Glass-Ceramics Containing EAF Dust in Acidic Solution Nickel Tungsten Alloy Electroplating for the High Wear Resistant Materials Applications Adhesion Properties of Copper/Polyimide Film Modified by Reactive Ion Etching(RIE) In2O3 Thin Films Prepared on TiAlN Substrates Using a Triethylindium and Oxygen Mixture Microstructures and Tribological Properties of Plasma Arc Sprayed Al-Fe-Cr-Ti Quasicrystalline Coatings Variation of Corrosion Resistance and Hardness with Heat Treatment of ALDC8 Al Alloy Impact and Indentation Resistance of Superhard AlCrN Thin Films Shielding Effectiveness Simulation of Brass-Iron Sandwich Films The Effects of Si and Deformation on the Phase Transformation in Dual Phase Steels Characteristics of 2.45GHz Microwave Plasma by Langmuir Probe Measurements An Ab Initio Study of the Energies of Coherent Interfaces Formed between bcc Iron and Carbides or Nitrides of Transition Metals Competing Ion Effect of Stabilization by Cr(III) & Cr(VI) in Ettringite Crystal Structure Microscratch Analysis and Interfacial Toughness of Catalyst Coating on Electrolyte Polymer in Micro Fuel Cells A Method for the Evaluation of Heat Transfer Coefficient by Optimization Algorithm Characterization of Anisotropic and Irregularly-Shaped Materials by High-Sensitive Thermal Conductivity Measurements Dimensional Characteristics of Products Using Rotary Swaging Machine with Four-Dies Cooling and Heating Characteristics of Ti-Ni Based Shape Memory Alloy Wire Actuators X-Ray Anomalous Scattering Studies of Fe-Tb Amorphous Thin Films Encapsulation of H2 Molecules in Cs3Na9-A Zeolite: A Theoretical Approach Coarsening of MX Nitrides in Cr-Mo-N-X(X=V,Nb,Ti) Ferritic Steels EXAFS Analyses on Local Structure of Gallium in Amorphous Selenide Optical Materials Doped with Rare Earths Analysis on the Martensitic Transformation in the Ti-xNb Alloys Using a Phenomenological Theory Mechanical Strength and Microstructural Characterization of SUS304 Brazed Joints with BNi-2 Filler Metal: Influence of Brazing Temperature and Time Characterization of a-Se(As:Cl) Film for Phosphor Coupled X-Ray Light Modulators Ab Initio Study with Transition State Theory (TST) for the Calculation of the Barrier Height of Migration Energy of Neutral Indium in Silicon Effects of Thermal Annealing on the Atomic Structure of ta-C Films Using Molecular Dynamics Study Observation of an Interlayer in a Nano-Scale SiO2 Layer on Si Substrate by X-Ray Reflectivity (XRR) Analysis Grand Canonical Monte Carlo Simulations for the Prediction of Adsorption Capacity of Hydrogen in MOFs Effect of Curvature on Gas-Particle Flow in Converging and Diverging Supersonic Nozzle Measurement of Mechanical Properties for Thin Film Using Visual Image Tracing Method Estimation for Nd-Fe-B Melt-Spun Powder Quality Encapsulation of Municipal Solid Waste Incineration Bottom Ash to Immobilize Cu and Pb via Carbonation Reaction Modification of V2O5-WO3/TiO2 Catalysts Supported on SiC Filter for NO Reduction at Low Temperature Preparation and Stabilization of Chitosan-Lipase Composite within Mesoporous Silica Material Fabrication of Lotus-Type Porous NiAl and Ni3Al Intermetallic Compounds Pore Morphology of Lotus-Type Porous Copper Fabricated by Continuous Casting Technique Gold Nanowire-Network Structure Prepared from Metallic Gold Nanowires Deposited in Polycarbonate Template Membrane Nanoporous SiC Membrane Derived from Preceramic Polymer Mechanistic Aspects of Ethylbenzene Dehydrogenation with CO2 over K2O/B2O3 -TiO2 - ZrO2 Bi-Functional Catalysts Effect of Method of Preparation of Cu-Zn-Al Catalysts on DME Synthesis Heterogeneous Photocatalytic Degradation of Chlorophenols over Ag-TiO2 Nano Particles in an Aqueous Suspension Nano-Sized Au/CeO2 Catalysts for Total and Selective CO Oxidation Performance of Immobilized Quaternary Salt Catalysts in the Synthesis of Dimethyl Carbonate from Propylene Carbonate and Methanol Catalytic Cracking of LLDPE over MCM-48 Synthesis and Catalytic Application of Mesoporous Molecular Sieves MCM-41 Containing Niobium and Tantalum Preparation of Silica-Supported Nickel Molybdenum Phosphides by Temperature-Programmed Reduction Technique Chemical Vapor Deposition of Pt Nano Particles on Carbon Nanotubes Influence of Electrolytic Mediums on Microstructure of Anodic Titania Film Ti Oxide Films Formed by an Anodizing Process for Use in Dental Implants Pt(IV) Adsorption Characteristics of Nanoporous Carbons Modified with Carboxymethylated Polyethyleneimine Microwave-Assisted Heterogeneous Transfer Hydrogenation of Ketones A Study of Hydroxyapatite Coating on Porous Ti Compact by Electrostatic Spray Deposition Photocatalytic Hydroxylation of Phenol over Ti-Containing Zeolites (TS-1, Ti-MCM-41) Characterization and Acid Catalytic Properties of NiO Supported on ZrO2 and Modified with MoO3 Characteristics of Al Foam with High Porosity by Melt Foaming Method Dry Wear Properties of Porous Copper Fabricated by Unidirectional Solidification Chiral (Salen) Complexes Encapsulated in Mesoporous ZSM-5 as an Optical Active Catalyst for Asymmetric Phenolic Ring Opening of Terminal Epoxides Ferroelectric Nanotube Arrays in Hexagonally Ordered Pores of Aluminum Oxide Synthesis and Photocatalytic Activity of TiO2 Nanoparticles Loaded on the Fluorine-Modified Hydrophobic Mesoporous Silica Electrochemical Characteristics of Carbon-Supported Metal Nanoparticles Catalysts Prepared by Electrical Deposition Methods Investigation on the Sound Absorption and Transmission for Aluminum Foam and its Composite Structural Features and Microwave Properties of Ba0.5Sr0.5TiO3 Films Grown on Sapphire Substrates Synthesis of Dense Mesoporous Silica with High Surface Area by Hydrothermal Hot-Pressing (HHP) Method Adsorption Properties of Activated Carbon Fibers Characterized by Electric Decomposition A Study on Al-Mg Alloy Foams by Melt Foaming Method