Home > General > Engineered Technologies in Materials Science, Geotechnics, Environment and Mechanical Engineering
Engineered Technologies in Materials Science, Geotechnics, Environment and Mechanical Engineering

Engineered Technologies in Materials Science, Geotechnics, Environment and Mechanical Engineering

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

The collection covers selected, peer reviewed papers from the 2012 International Conference on Engineering Materials, Geotechnical Engineering and Environmental Engineering (EMGEEE 2012), October 26-28, 2012, Shijiazhuang, Hebei, China. The papers are grouped as follows: Chapter 1: Advanced Technologies in Materials Science and Chemical Engineering; Chapter 2: Biochemistry and Microbiology; Chapter 3: Geotechnical Engineering; Chapter 4: Applied Mechanics and Advances in Mechanical Engineering; Chapter 5: Power Engineering; Chapter 6: Technologies of Control and Measurement. Industrial Electronics; Chapter 7: Networks and Information Technologies. Applied Methods of Computing; Chapter 8: Engineering Management and Environmental Engineering.

Table of Contents:
Preface Chapter 1: Advanced Technologies in Materials Science and Chemical Engineering Experimental Studies on Dispersion of Fine Non-Spherical Particles in Enclosed Spaces Fatigue Behaviour of Fibre Metal Laminate (Glare) Vis-À-Vis Plain Aerospace Aluminum Alloy: An Experimental Investigation The Effects of Chitosan on Dyeing Abilities of Cotton Fabric Dyed with Reactive Dyes Proposal of Implementation of Conductive Polymer Composites as High Temperature Detection Devices for LVSB’s Study on the Preparation of a New Tofu Coagulant by the Acidic Components of Schisandra Synthesis and Properties of IPDI-TMP Waterborne Curing Agent Experimental Study on Gas Production from Methane Hydrate Bearing Sand by Depressurization Response of Alfalfa (Medicago sativa L.) Bud Seedling to Saline and Alkaline Stress under Water Culture Conditions The Patented Project Design for Preparing CuInSe2 Film Study on Preparation of Electromagnetic Shielding Coating Based on Nickel/PET The Preparation and Performance of Gypsum-Based Composites Acoustic Emission Monitoring for Delaminated Composites under Bending Damage Failure Condition Influence of Pretreatment Process on Microstructure and Properties of 65Mn Steel after Subcritical Quenching Annealing Time Dependence on the Phase Equilibria and Thermoelectric Property of Type-I Ba8Cu6Ag2Si38 Clathrate Ultra-Precision Flycutting Microstructures on Brittle Materials VOC Gas Sensor Based on ZnO Synthesized by Sol–Gel Process and Improvement in Gas Sensitivity by Adding TiO2 Preparation for Humidity Control Composite Paperboard and their Humidity Control Properties Purification of Anthocyanins from Black Hulls by AB-8 Macroporous Resin Influence Factors of Calcium Carbonate Whiskers Prepared by Intermittent Bubbling Method Effects of Alloying Elements on Structure of Plasma Electrolytic Oxidation Ceramic Coatings on Aluminum Alloys Electrochemical Performance of Mg-Doped Li2FeSiO4/C as Cathode Material for Lithium-Ion Batteries Anticorrosion Performance and Field Application of a New Rebar Inhibitor Corrosion Inhibition Mechanism of the Inhibitor in Sedimentary Water of Storage Tank by AC Impedance Method Cleaning Technology on Filter Cake of Silicate-Based Polymer Drilling Fluid Effect of Diffusion Heat Treatment on Thickness of Cold-Rolled Cu/Al Composite Laminate Interface Study on Flow Stress Characteristics of AZ31B under Multi-Stage Hot Deformation Experimental Study on Low Temperature Mechanical Properties of HTPB Propellant Exhaust Emissions of a Diesel Engine Fueled with Soybean-Oil-Methyl-Ester-Diesel Blends and their Fuel Properties Tribological Properties of DLC Films Deposited at Different Time under Low Temperature Microstructure and Mechanical Properties of Joints of X100 Line Pipe by Submerged Arc Welding Numerical Simulation of the H-Beam during Cooling Process Nd 3+ Substituted Nanocrystalline Zinc Ferrite Sensors for Ethanol, LPG and Chlorine Chapter 2: Biochemistry and Microbiology Construction of Prokaryotic Expression Vector Containing Flocculation Gene FLO5 and Expression of FLO5 in E.coli Evaluation of Using Eicosapentaenoic Acid in Plant Tissue Culture Media The Broad Spectrum Inhibitory Effect Study of 3 Rare Earth Salts Used for Microbial Inoculant Additive Wide Spectrum Inhibitory Effect Study of Two Botanical Antimicrobials to Soil and Air Microbes Electrochemical Aptasensor for Label-Free Detection of Protein Based on Gold Nanoparticle Involved Self-Assembly Chapter 3: Geotechnical Engineering Study on the Effect of Loess Strength Induced by Different Action Methods of Stochastic Seismic Load The Prevention of Rock-Fall on Slopes in Transferred Underground Mining from Open-Pit Assessment of Free Spanning Pipeline Strength Disaster Prevention of Mining Field Roof Fall in Open Pit to Underground Study of Tunnel Leakage Current Situation and Lining Structural Safety of Operating Expressway Tunnels Three Dimensional Finite Element Analysis of Subway Shield Tunnel under Exsisting Bridge Chapter 4: Applied Mechanics and Advances in Mechanical Engineering Periodic Disturbance in Turbulent Boundary Layer Method to Study on the Mechanical Properties of the Perturbation Velocity Component Research on the Effect of Head Type on the Hydrodynamics of Vertical Motion Vehicle Launched by Gas Curtain Simulation of Planar 2-DOF Manipulator Based on Virtual Reality Study on the Underwater Rotating Apparatus with Changeable Rotating Angle Modeling and Simulation of Electric Drive Bulldozer Based on the Torque Control Balance Method of Lithium-Ion Battery Pack Based on Multi-Secondary Coaxial-Winding Transformer The Research of Vehicle Seat Dynamic Comfort Characteristic Finite Element Analysis of the Rolling Bearing Clearance Environmental Field with ANSYS Development and Application of Light-Weight Design of the Aluminum Alloy Wheel Color Calibration Method for Printing & Dyeing Manufacturers Effect of DC Supply Voltage on Eddy Current Loss in Permanent Magnet of Permanent Magnetic Synchronous Motor for Electric Vehicle Application Analysis of the Long-Distance Pipeline Failure Modes Belt Machine Welding Deformation Control and Correction Method Reliability Calculation Method for Mechanical Components with Dependent Failure Modes Simulation of Leakage Model of Long-Distance Oil Pipeline Based on FLUENT Three-Dimensional Modeling of Opposed Biconical Cone Screw High-Pressure Seawater Hydraulic Pump A Study of the Ball-and-Plate System Driven by Pneumatic Direct Cylinders Green Design and Manufacture in Machine Tool and Hydraulics System Key Technology Research on Abrasive Water Jet Cutting System in Deepsea Modeling and Performance Study of a Novel Cross-Node Support Structure of Free-Free Beam Vibration Gyroscope Design on UHV System with TSP Tooth Contact Analysis and Transmission Error Optimization for Klingelnberg Spiral Bevel Gear Gear Fault Diagnosis Method Based on the Integration of Empirical Mode Decomposition and Cepstrum Analysis Evaluation Research on Hybrid Electric Drive System of Armored Vehicles Based on Multiple Attribute Decision Making Optimization Design for C6190ZLC Marine Diesel Engine Research on Heavy Truck Cab Tilting Motor The Effect of Vortex Tube Air Cooling on Surface Roughness and Power Consumption in Dry Turning The Analysis of Distribution Lines Lightning Accident Caused by Microwave Tower One-Dimensional Temperature Distribution Reconstruction Research in Gas Combustion Boiler Based on the Radiation Energy Leakage of Long-Distance Pipeline by FIOEFD Simulation and Indoor Experiment Chapter 5: Power Engineering The Lightning Preventing Methods for 10kV Distribution Lines Discussion of the Line GMOA Test Method The Research of Instruments for Allocating Cable Fault Based on the Priciple of Sound and Magnetic Research of Indirect Lightning over-Voltage on Power Supply Cables Analysis of 220kV Transformer Tripping Accident Caused by Neutral Point Gap Breakdown Analysis of a 66kV Transformer Insulation Breakdown Accident Analysis of Box Transformer Oil Chromatographic Abnormal Data in a 35kV Wind Farm A Renewable Source of Hydroelectricity Study on Hebei Wind Power Generation Enterprises’ Development-Countermeasures Based on the Cost-Benefit Analysis Chapter 6: Technologies of Control and Measurement. Industrial Electronics Production Line Data Acquisition and Interlock System Research on Supervisory System Based on Power Management Design of Individual Combat Positioning System The Radar Signal Detection Based on Higher Order Statistics Automatic Block Detection for Ink Jet Head Iterative Learning Control for a Class of Time-Delay Systems with Time-Varying Uncertainties Design of Shaped PVDF Radiation Mode Sensor and its Application in Active Structural Acoustic Control System A Novel Motion Control Method Based on Acquired Images A Sensor Used to Detect the Thigh Human-Machine Coupling Force in Lower Limb Rehabilitation Robot A Design of Low Temperature Dependence Voltage Reference Circuit for PWM Controller Switched-Capacitorized DC/DC Converters Intelligent Electronic Code Lock Based on the SCM Based on the Repetitive Controller for Induction Heating Power Supply Control System Design of Upper Limb Rehabilitation Robot Research of High Performance Polarization-Independent Grating Beam Splitter Research of UPS Inverter Based on Repetitive Control and Deadbeat Control Development of Ni-Zn Ferrite Based Smart Humidity Sensor Module by Using Mixed Signal Programmable System-on-Chip Research on Timing of on-Chip Power Supply Noise with Analysis of Scientific Data Materials Design and Simulation of Discrete Controller for DC-DC Converter Intelligent Information Control for Air System Adaptive Fuzzy PID Control for Cutter Adaptive Fuzzy Control of Furnace Pressure System Aircraft Arresting System and Auto Net Setting up Part Design Single Degree Vibration Platform Self-Tuning Fuzzy PID Controller Design Based on AMESim The Position Servo Control Strategy of High Dynamic Response Based on Electric Steering Gear Variable Structure Fuzzy PID Plane Flat End Steering Gear Servo System Fuzzy Controller for Synchronous Motor Research of Electric Differential Control for Motor-Wheel-Drive Electric Vehicle The Study on Electromechanical Teaching System and Fault Diagnosis Advance in Renewable Energy Using Piezoelectric Power-Harvesting Devices The Detection of Road Roughness Based on MEMS Inertial Sensor Application of Blow-off Wind Tunnel Control Based on Genetic Algorithm Optimized BP-Neural Network PID Neural Network Research on Monitoring System of Environment in Switchgear Chapter 7: Networks and Information Technologies. Applied Methods of Computing Exploring Insights through Visualization of Association Rules from Text Mining Statistics 3-D Networks for Mining Knowledge from Energy Policy Literatures Research on the Development and Design of Network-Based Teaching Resources Study on Application in the Teaching of Ship Maneuvering Simulator Design and Realization of RFID Cold Chain Logistics Management System The Application of Mathematical Expectation in Reality The Fault Diagnosis Method of Mixed-Model Assembly Line Based on Dynamic Causality Bayesian Network Design and Implement of the Wireless Real-Time Data Transmission System Based on USB Database Dynamic Programming Based on B/S Research into Framework of Real-Time Data Integration System Implementation of Eurocode Load Cases in Optimization Problems of Steel Frames, Based on Genetic Algorithms Study on Site Selection Method of Third-Party Logistics Distribution Center Study of Establishing the Logistics Management Information System Based on Data Mining A Novel Deformable Grid Method for Image Segmentation Underwater Sediments Echoes Recognition Based on KECCA + PLS Research on Synchronization Technology Based on IEEE1588 Protocol Data Mining and Knowledge Discovery Based on Denoising Algorithms in Geology Exploration Hierarchy Organization Model Based on the Logic of Tasks A Print-Scan Resilient Watermarking Scheme Based on the Numbers of the DCT Positive and Negative Coefficients Research on Military Logistics Visible Support Technology Research of “Yes” and “No” Responses by Auditory Stimuli in Human EEG 1553B Bus Interface Driver Software Design and Implement Based on RTX Element Mediator Function Design in the TMN Cloth Modeling Simulation Based on Mass Spring Model An LR Parser with Less States Chapter 8: Engineering Management and Environmental Engineering Reusing Diggings Abandoned Place is an Important Way in Environmental Protection The Method to Control Export-Road Dust of Strip Mine Disaster Prevention of Atmospheric Rainfall in Transition from Open Pit to Underground Construction and Implementation of Virtual Organization for Regional SMEs Emergency Materials Distribution Risk Control Computation of Gas Hydrate Saturation Models Based on the Experimental Acoustic Parameters Design and Application Research of Audit Risk Control Program Analysis to Cost Control Points in the Construction Phase of Construction Enterprise


Best Sellers


Product Details
  • ISBN-13: 9783038260509
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3038260509
  • Publisher Date: 27 Feb 2013
  • Binding: Digital download and online
  • No of Pages: 752


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Engineered Technologies in Materials Science, Geotechnics, Environment and Mechanical Engineering
Trans Tech Publications Ltd -
Engineered Technologies in Materials Science, Geotechnics, Environment and Mechanical Engineering
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Engineered Technologies in Materials Science, Geotechnics, Environment and Mechanical Engineering

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!