Volume is indexed by Thomson Reuters CPCI-S (WoS). Deformation and annealing phenomena are of great technical significance to the processing and application of materials at the industrial scale. This edited collection of peer-reviewed papers was designed as a one-off vehicle for reviewing the current understanding of the basic mechanisms and processes that control deformation and annealing in various materials, together with their modelling and simulation. Another aim was to facilitate discussion of the failings of established theories, to explore new ideas, and to identify avenues where future research is required. The present papers apply these concepts to a wide range of materials and applications; from conventional steels and light alloys to nanocrystalline gold wires and geological samples.

Table of Contents:
Committee Preface Keynote Papers Effect of Changing Strain Rate during Warm Deformation on Static Recrystallisation of IF Steel The Application of Multiscale Modelling for the Prediction of Plastic Anisotropy and Deformation Textures Simulation of Rolling and Recrystallization Textures in Aluminium Alloy Sheets Evolution of the Grain Boundary Network as a Consequence of Deformation and Annealing Modelling the Precipitation of Al3X Dispersoids in Aluminium Alloys and their Effect on Recrystallization On the Viability of FIB Tomography for Generating 3-D Orientation Maps in Deformed and Annealed Metals Correlating Microstructural Features and Surface Roughening in Ferritic Stainless Steel Heterogeneous Deformation and Internal Stresses Developed in BCC Wires by Axisymmetric Elongation Modelling Nucleation of Recrystallisation in Aluminium Alloys Subgrain Rotation Recrystallization in Minerals Slip Circle Constructions for Inhomogeneous Rotational Flow Applications of Through Process Modelling Developed in VIRSTAR Deformation and Recrystallization during Thermomechanical Processing of a Nickel-Base Superalloy Ingot Material Static Recovery and the Orthogonal Strain Path Change Effect in IF Steel Effects of Stress on Structure Transformations in Metals Mechanisms of Formation of Submicron Grain Structures by Severe Deformation Global and Local Structural Evolution during Deformation and Annealing of FCC Metals Multiple Forging Textures and Microstructures in Al Alloys Deformation The Dislocation Patterns in Deformed Metals: Dislocation Densities, Distributions and Related Misorientations Recent Progress in the 3D Experimentation and Simulation of Nanoindents Evolution of the Deformed Substructure Obtained by Cold-Rolling in IF Steel Observations of Strain Induced Precipitation during the Thermomechanical Processing of AA6111 Alloy Deformation Mechanisms in High-Al Bearing High-Mn TWIP Steels in Hot Compression and in Tension at Low Temperatures An Analysis of Deformation Microstructure and Subsequent Recrystallisation in Hot Deformed Aluminium Alloy AA5052 Using Forward and Reverse Torsion Uniaxial and Plane Strain Compression Behaviour of Magnesium Alloy AZ31: A Comparative Study Microstructure Evolution after Large Strain Deformation in Al-0.13%Mg Deformation Processing of Sheet Metals by Continuous Frictional Angular Extrusion Microstructure and Strain Distribution Influence on Failure Properties in Eutectic AlNi, AlFe Alloys General Principles of Substructure Inhomogeneity, Arising in Metal Materials under Plastic Deformation TEM Investigation of Dislocations in Hot Deformed Mg-Al-Zn Alloy Microstructure and Microtexture Evolution of a TRIP-Assisted Steel after Small Deformation Studied by EBSD Technique Stimulated Grain Refinement in Ni-Fe Alloy by Coarse Particles during Warm Multi-Directional Forging Comparison of Single Crystalline and Polycrystalline Behavior under High Pressure Torsion Effect of Low Temperature Rolling on Microstructure and Properties of ECAE Processed Copper Deformation and Heat Treatment of Cold Drawn Gold Characterization of Boundary Misorientations in a Superplastic Al-Alloy Hot-Deformed by ECAE Ultra-Fine Grained High Carbon Steel by Innovative Deformation Quantifying Heterogeneous Microstructures: Core and Mantle Subgrains in Deformed Calcite Annealing Phenomena Effect of Deformation Route on Recrystallization Behaviour of 1100 Aluminum Sheet An EBSD Study of Austenite Formation and Stability in Low-Alloy TRIP Steels Annealing of Deformed Materials Developed by Continuous/Discontinuous Dynamic Recrystallization Annealing in a Natural Laboratory: an EBSD and Cl Study of Calcite and Quartz Growth from Volumes of Rock Heated by a Nearby Melt Intrusion Effects of Solubility Limit and the Presence of Ultra-Fine Al6Fe on the Kinetics of Grain Growth in Dilute Al-Fe Alloys The Relative Importance of Nucleation vs. Growth for Recrystallisation in Particle-Containing Fe3Al Alloys The Softening of a Dispersoid-Rich Commercial Al-Mn Alloy Ferrite Formation during Slow Continuous Cooling in Steel The Effect of Strain and Strain Path during Deformation on the Recrystallisation of a Particle Containing Aluminum-Manganese Alloy A Criterion for Conventional Dynamic Recrystallization: Application to Magnesium Alloys Influence on Annealing Treatments on Twins in Magnesium Alloy AZ31 Effect of Low-Temperature Recovery Treatments on Subsequent Recrystallization in Al-2.5%Mg Grain Boundary Migration and Compensation Effect Microstructure and Texture of Dynamically Recrystallized Copper and Copper – Tin Alloys The Microstructure Evolution of Copper and Gold Bonding Wires during Annealing Pinning Forces Exerted by TiN Particles in Austenite of Structural Steels and Comparison with Driving Forces for Grain Growth and for Static Recrystallisation Structural Dependence of Grain Boundary Energy in Fe-Based Polycrystals Identified by OIM Measurements Static Recrystallization of Austenite in a Medium-Carbon Vanadium Microalloyed Steel and Inhibition by Strain-Induced Precipitates Microstructural Refinement during Annealing of Plastically Deformed Austenitic Stainless Steels Effect of Initial Austenite Microstructure on the Softening – Precipitation Interaction in a Low Nb Microalloyed Steel The Role of Austenite Grain Misorientation on Ferrite Nucleation in an Fe-Cr-Ni Alloy In-Situ EBSD Observation of the Recrystallization of an IF Steel at High Temperature Temperature and Deformation Effects on the Recrystallization Microstructure and Texture of Wire Draw Steel Role of Recovery in the Recrystallization Simulation Application to a Cold Rolled IF-Ti Steel and a Cold Drawn Copper Wire Recrystallisation Behavior of Cold Rolled Zr702: Influence of Rolling Direction and Thickness Reduction Study of Grain Growth Kinetics in Submicrocrystalline Armco-Iron Intercritical Annealing Behaviour of an Ultrafine Grained C-Mn Steel Obtained by Hot Torsion Deformation Texture Overview of Texture Evolution during Friction Stir Welding of Stainless Steel Using Crystal Plasticity and EBSD Tracing the Goss Orientation during Deformation and Annealing of an FeSi Single Crystal Orientation Selection in ULC Steel during Thermally Activated Phenomena Induced by Cold Deformation Retention of the ‹001› Fiber Texture for Fe-Si Electric Motor Steels Surface Texture Evolution during α-γ-α Transformation in Mn and Al Alloyed Ultra-Low Carbon Steel Texture and Microstructure Variation in Severe Plastic Deformed OFHC Cu Wires Recrystallization Texture of Copper as a Function of Layer Thickness in Roll-Bonded Cu-Nb Composites Deformation Structure and Texture Transformations in Twinned Fcc Metals: Critical Role of Micro- and Macro- Scale Shear Bands The Effects of Hot Band Annealing Temperature on the Texture of 2%Si Nonoriented Electrical Steel Texture Evolution during Recrystallization in Nonoriented Electrical Steels A Study of Texture Evolution during Deformation and Annealing in Fe 3 wt.-% Si by Orientation Contrast Microscopy Mechanism of Texture Evolution during Primary Recrystallisation and Grain Growth in a Zr-2Hf Alloy Texture Evolution in Invar® Deformed by Asymmetrical Rolling Texture Evolution of Tertiary Oxide Scale during Steel Plate Finishing Hot Rolling Simulation Tests Modelling and Advanced Techniques A Model for Multi Peak Dynamic Recrystallization in Copper Modelling Deformation Structures in Metals Based on an Entropic Analysis A Fundamental Model of Aluminum Single Crystal Behavior with Physical Description of Kinematic Work Hardening Modelling the Deformation and Annealing Processes: Physical and Regression Approaches Normal Grain Growth in Three Dimensions: Monte Carlo Potts Model Simulation and Mean-Field Theory Modelling the Influence of Cementite on Static Recrystallisation in Cold-Rolled Low-Carbon Steels Kinetics, Mechanism and Modeling of Microstructural Evolution during Dynamic Recrystallization in a 15Cr-15Ni-2.2Mo-Ti Modified Austenitic Stainless Steel Microstructure Evolution during Thermal Processing : Insight from In-Situ Time-Resolved Synchrotron Radiation Experiments Properties and Dynamics of Bulk Subgrains Probed In-Situ Using a Novel X-Ray Diffraction Method Determination of Texture and Microstructure of Recrystallized Metals Using High-Energy Synchrotron Radiation Three Dimensional Microstructure–Microtexture Characterization of Pipeline Steel Recrystallization Investigated by X- Ray Diffraction Imaging Plastic Deformation of Zr-Based Alloys at Temperatures of Phase Transformations