Home > General > Innovation for Applied Science and Technology
Innovation for Applied Science and Technology

Innovation for Applied Science and Technology

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

Selected, peer reviewed papers from the Second International Conference on Engineering and Technology Innovation 2012, November 2 - 6, 2012, Kaohsiung, Taiwan ROC. The papers are grouped as follows: Chapter 1: Materials Engineering and Processing Technologies of Materials; Chapter 2: Machine Parts and Mechanisms: Design and Manufacturing; Chapter 3: Energy and Power Engineering; Chapter 4: Architecture, Civil and Industrial Engineering; Chapter 5: Environmental Sciences and Engineering; Chapter 6: Medical Machinery and Technologies, Innovative Developments; Chapter 7: Sensors, Mechatronics and Robotics; Chapter 8: Automation and Control; Chapter 9: Electronics, Electrical Engineering and Power Electronics; Chapter 10: Communication, Optoelectronics and Optical Systems; Chapter 11: Methods and Algorithms for Processing and Analysis of Data; Chapter 12: Computer and Information Technologies; Chapter 13: Innovation Management, Product Design and Engineering Management.

Table of Contents:
Preface and Committees Chapter 1: Materials Engineering and Processing Technologies of Materials Effect of Bi2O3 Addition on the Microstructure and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3-Ba(Sn0.02Ti0.98)O3 Ceramics A Strain-Rate Gradient Theory of Plasticity and its Comparison with Strain Gradient Theories A Study on the Fabrication of Metallic Bipolar Plate for Subminiature Fuel Cell Using Powder Injection Molding Process A Study on the Gelation Properties and Rheological Behavior of Gellan Gum An Adaptive-Network-Based Fuzzy Inference System for Predicting Springback of U-Bending Anti-Corrosion Properties of the Reactive Anode and Cathode Inhibitor by Electrochemical Treatment in Aqueous Axial Compression for Direct Capture of Carbon Dioxide (CO2) Calcined Powder of the Sol-Gel Synthesis Hydroxyapatite Cell Cycle Analysis of Rat Schwann Cells on Chitosan Scaffolds by Flow Cytometry CFD Simulation of the Fused Silica Synthesis Furnace Characterization of Conductive Thin Films Deposited by Ink Jet Printing Comparative Study on Partial Discharge Characteristic in Polymer-Nanocomposite as Electrical Insulating Material Determination of the Value of E in Metallic Materials Dynamic Adsorption and Desorption of Toluene on Carbon Nanotubes Grafted Activated Carbon Fibers Effect of Acid Etching Durations on Surface Roughness and Residual Stresses of Lightweight Glass Ceramic Effect of K2CO3 Addition on the Structure and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3-( Na0.5Bi0.5)TiO3 Ceramics Effect of PE-g-MAH as Compatibilizer on Properties of LDPE/NR/WHF Composites Effect of Strain Rates on the Mechanical Behavior of Cu Thin Films of Various Thicknesses Effects of Carbon Co-Implantation on Transient Enhanced Diffusion and Performances of the Phosphorus Doped Ultra-Shallow Junction Nano NMOSFET Effects of Cooling Rate on the Microstructure and Mechanical Properties of Ti-6Al-4V Alloy Effects of Substrate Temperature on the Microstructure and Properties of Al-Doped ZnO Thin Films by DC Magnetron Sputtering from AZOY® Target Engineered Properties of Sustainable Cement-Based Composites Containing Recycled Rock Wool and Supplementary Cementitious Materials Fabrication and Characterization of Cu-Plated Fine Pitch Patterns on Flexible Polyimide Fatigue Strength under Optimal Conditions of Spot Weldment Using GA and FEM FEM Simulation on Rotating Piercing Process with Coulomb Friction Fiber Cross-Section Shape Effect on Rate-Dependent Behavior of Polymer Matrix Composites with Fbgs Sensors Functionalized Mn2+ Doped Zinc Sulfide Quantum Dots as a Metal Ion Sensor for Industrial Wastes Impact Characteristics of CFRP Hat-Shaped Members According to Changes in Outer Layer under the Hygrothermal Environment Intact Ultrathin Ni Films Fabricated by Electroplating with Supercritical CO2 Emulsion Isothermal Section of the Sn-Fe-Zn Ternary System at 270°C Leakage and Fatigue Characteristics of Polyvinylidene Fluoride Film Micro-Compression Test of Nanocrystalline Nickel Deposited by Supercritical Carbon Dioxide Emulsion Nanocrystalline Diamond Particles Prepared by High-Energy Ball Milling Method Nonlinear Dynamic Characteristics of Giant Magnetostrictive Nanofilm-SMA Composite Beam in Axial Stochastic Excitation Numerical Analysis on Failure Behavior of Composite Sandwich Plate Oxidation Resistance and Corrosion Resistance of AlTiCrON Multilayered Coatings on AISI M2 Tool Steel Partial Discharge Characteristics of Natural Rubber Blends with Inorganic Nanofiller as Electrical Insulating Material Properties of RF Magnetron Sputtered Sr0.4Ba0.6Nb1.85Ta0.15O6 Thin Films Spot Weld Property Testing and Simulation Modeling with Failure Criteria Static and Fatigue Strengths of Carbon Nanotube/Epoxy Composites under Hygrothermal Environments Study on Multi-Stage Cold Forging of Stainless Automotive Battery Fastener Susceptibility to Stress Corrosion Cracking of Fe-35Mn Alloy under a Pseudo-Physiological Condition Taguchi Method and Genetic Algorithm Neural Networks Analysis of Forging Process of Bicycle Chain Wheel Taper Angle of Silicon Nitride Thin Film Control by Laser Direct Pattern for Transistors Fabrication Texture Evaluation of Sol-Gel Derived Mesoporous Bioactive Glass The Influence of Ti and Al Additions on the Mechanical Response of Cobalt Superalloy Thermal Annealing Effects Study on Electrical and Structural Properties for Ni-Au/n-GaN Schottky Contacts Thermal Stabilities and Mechanical Properties of Two Tetra-Functional Epoxy Resins Titanium-Doped Indium-Tin-Oxide Anti-Reflection Coating for Poly-Si Solar Cells Fatigue Quality Index by Infrared Stress Measurement in Spot Weldment A Study of Fabrication Nanopowders of Cu2ZnSnS4 for Solar Cells Absorbers Effect of PAO-Based ?-Fe2O3 and Surfactant Concentration on Viscosity Characteristic Adsorption Behaviors of Nucleic Acid by Cationic Magnetic Nanoparticles Annealing Effects on Hydrophobic AlN Coatings Degradation Mechanism of III-V Triple Junction Solar Cells Analyzed Using Step Stress Tests Detecting Soil Water Content of Red Soil and Younger Alluvial Soil Using a Spectrometer Dry Machining of T6061 Aluminium Alloy Using Titanium Nitride (TiN) and Titanium Carbonitride (TiCN) Coated Tools Effect of Textured Surface on Sliding Friction Investigated Using Molecular Dynamic Simulation Effects of an Extended Amphipathic Helix on Intermolecular Interactions and Self-Assembly of Peptides via Pulsed Field Gradient Nuclear Magnetic Resonance Effects of SiO2 and TiO2 Nanofillers on Conductivity Level of LLDPE-NR Nanocomposite HV Insulator Flame Synthesis of Carbon Nanotubes and Nano-Onions in a Rotating Opposed-Jets Flow Investigation of Hybridization Efficiency of a Sequence-Orientated Coaxial DNA Probe Microarryed on Biochips Using Atomic Force Microscope The Humidity Property of the AR Texture with SiO2 Nanospheres by Spin Coating Method The Effect of Annealing Temperature on the Opt-Electric Properties of Ti:GZO Transparent Conducting OxidesThin Film The Curing Cycle Grouping of Aerospace Composite Shop Submicron Patterns on Sapphire Substrate Produced by Dual Layer Photoresist Complimentary Lithography Study on CO2 Adsorption on LiOH-Modified Al2O3 Study of Zinc Oxide Films on SiO2/Si Substrate by Sol–Gel Spin Coating Method for pH Measurement Study of Biodegradable Polyurethane Foam as Carriers for Low C/N Ratio Wastewater Stress Analysis of Carbon Nanotubes Reinforced Nanocomposites Stochastic Nonlinear Vibration of Fluid-Loaded Double-Walled Carbon Nanotubes Size Effect of Silver Nanoparticle Melted into ZnO Nanorods for Photocatalytic Activity Robust Design Analysis on Fatigue Life of Lead-Free Sn0.5Ag Solder in a Multichip Module Package Research on the Synthesis Process of Ethylmaltol by Electrochemistry Research on the Extraction Process of Water-Soluble Asparagus Powder and Removal of Free Radical Optimization Technology and Developing of Vascular Stents Optimal Buffer pH Value on the Detection of HSA by Using a Protein Chip Prepared by DNA-Directed Immobilization Neural Network MIMO Model for Production of Isopropyl Myristate in a Semibatch Reactive Distillation Column Neural - Wiener Model for Multivariable Methyl Tertiary Butyl Ether (MTBE) Reactive Distillation Nanoscale Removal Processing by a Twin-Cylinder Tool Nanoparticles Composed by Oligochitosan and Polyethylenimine for Gene Delivery Kinetic Model with Effect of Water Content for Enzyme-Catalyzed Citronellyl Laurate Esterification Process Light Reflectivity of Multiwall Carbon Nanotubes with Pattern-Less or Pattern-Grown Nanotubes Chapter 2: Machine Parts and Mechanisms. Design and Manufacturing An Analysis Method for Deepwater TTR Coupled Vibration of Parameter Vibration and Vortex-Induced Vibration Aeroelastic Behavior of Morphing Wing in Flutter Regions An Electromagnetic Sensing Method (ESM) to Detect the Short-Circuit in PCB Contour Positioning System - New Traveling Distance Estimation Method for Electric Vehicle Design and Simulation of Laser Module Packaging of TO-Based Butterfly-Type Structures Dynamic Analysis of a Geared Rotor-Bearing System with Time-Varying Gear Mesh Stiffness and Pressure Angle Experimental Study of Dual Heater Slider Touchdown Detectability Frequency Dependence on Image Reconstruction for a Buried Conducting Cylinder Innovative Derivation for Physics Relations Maximization of Solar Gains of an Air Collector by Simulations Measurement of Radius of Curvature by Coordinate Measurement Machine Measuring Path without Tool Center Point Function for B-Type Five-Axis Machine Tool Modulations of Amplitude in Mobile Acoustical Heritage Non-Iterative Mode Shape Expansion for Beam Structures Based on Coordinate Decomposition Numerical Comparison of Methods for Solving Boundary Layer Problems in Hydrodynamics On Studying Fluidic Motions in an Oscillating Heat Pipe Optimization of Aerodynamic Performance of Wind Turbine Blades Rapid Discrimination of Bacteria and Bacteriophages by Raman Spectroscopy Seawater Flow Characteristics and Drag Force Variation with Inflow Angle in Tidal Current Turbine System Taguchi Optimization of Machining Quality in Step Drilling of Composites Based on Membership Function The Application on Gear Fault Detection by Using Fast Time-Frequency Order Spectrum The Fluorescence Image of Portable System Enhanced by Asynchronous Trigger UV-LED Excitation The Membrane Thickness Prediction of Solder Paste Process by Phase-Shifting Projection The Numerical Simulation of Two-Degrees-of-Freedom Vortex-Induced Vibrations of Circular Cylinder with High Mass-Ratio The Study of Dynamic Simulation on Five Axis CNC Machine Theoretical Study on Premixed Flames of Nano Aluminum Particles and Water Mixture Ultrasonic Tomography System: Optimizing the Frequency in a Metal Pipe Conveyor A Finite Element Approach to Dynamic Stresses of Helical Gear Pairs Considering Tip Relief and Crowning Modifications A Sensing Device on Liquid Density Actuation of Adaptive Rearview System for Motorcycles Advances in Safety Assessment Method for Thin-Walled Shell’s Structure Containing Defects Analysis of a 3-DOF Rotationally Symmetric Hinge Analysis of NO Formation in Counterflow Premixed Hydrogen-Air Flame Light Weight Design for a Concept Sports Car Using Composite Material Application TRIZ Principles for Design and Manufacturing Coconut Cutting Machine Benefits on Implementation of Reduced Vertical Separation Minimum (RVSM) in Uzbekistan Complex Freeform Surface Measurement Based on Stereo Vision and Digital Phase-Shifting Techniques Conceptual Design of a Novel Three-Speed Geared Motor Conceptual Design of Integrated Brushless Permanent-Magnet Motors and Planetary Gear Trains Cone Frustum Part Simulation Performance of Turn-Mill Five-Axis Machine Tool Constructal View of Design and Evolution of Flow Configuration in Nature and Engineering Construction of an Elementary Model for the Dynamic Analysis of a Pressurized Water Reactor Cooling the Hydro-Powered Synergistic Nozzle Light by Water Design and Analysis of Acoustic Horns for Ultrasonic Machining Design and Analysis of Tubular Linear Machines with Dual Halbach Arrays Design and Characterization of Precise Laser-Based Autofocusing Microscope with Reduced Geometrical Fluctuations Design and Performance Analysis of Dual Vibrating Motors Self Synchronous Shaker with Balanced Elliptical Motion Design of Dual Layer Liner with Deformable Semi-Spherical Convex for Bicycle Helmet Design of the Hybrid-Propeller Shaft Using Composite Materials Design Techniques for Reducing Cogging Torque in SPM Motors Using Shifted Slot Opening Detailed Measurements of End-Wall Heat Transfer Coefficients of Square Pin-Fin Heat Sink for LED Lamp at Forced Convective State Determination of the Optimal Geometrical Features of a Microdrill Development of a Nanoscale Micro-Machining Machine Development of Thermoelectric Conversion System for Waste Heat Recovery of Automobile Engine Exhaust Gas Dynamic Analysis of the Proton Exchange Membrane Fuel Cell Dynamic Characteristics of New Tooth Profiles Gear Generated by a Novel Rack-Cutter Effects of Number of Circumferential Casing Grooves on Stall Flow Characteristics of a Transonic Axial Compressor Effects of Thermo-Physically Initial Properties on Inverse Heat Conduction Problem Evaluation of Wall Heat Transfer in Blade Trailing-Edge Cooling Passage Experimental Investigation of Airflow Distribution for a Novel Combustor Mode Experimental Testing and Finite Element Modeling of Bump Wafer Probing Extracting Single Source Geometric Error Value from a Double Ballbar Measurement Error Map Free Vibration of Fluid-Loaded Transversely Isotropic Magneto-Electro-Elastic Plates Friction Analysis on Vane of an Existing and of a Novel Multi Vane Rotary Compressor Heat Transfer Enhancement of the Liquid-Cooled LED Illumination Module Heat Transfer Enhancement of Vertical Heat Sinks with a Piezofan Impact and Ricocheting of a Cannonball Colliding onto Sea by Nose-Cone Shape Improved Energy Performance of Air-Cooled Liquid Chillers with Innovative Condensing-Coil Configurations In Situ Spacing Fluctuation Monitoring of Hard Disk Drive with Thermal Asperity Sensors Investigation of the Non-Equilibrium Flow Phenomena in the Boundary Layer of the Scramjet Engine Mathematical Modeling and Analysis of Vibration Characteristics of Smart-Phone Mathematical Modeling of Ball-End Cutter Mechanical Efficiency Analysis of a 16-Speed Bicycle Transmission Hub A Study of Micro Injection for Unibody Array LED Lampshade with Multi-Cavities A Study of Heat Transfer Characteristics of LED Heat Sink and Graphite Heat Sink Process Technology Development An Appropriate Design in Dimensions of Submount with Extra-Low Thermal Resistance for High Power LED MHD Couette Flow in Cylindrical Porous Annulus with Perfectly Conducting Walls Modeling and Simulation Study of a Series Hydraulic Hybrid Vehicle Multi-Objective Optimal Mechanical Power for Turbine of River Current Power Generation Using Fuzzy Dominant Directed-Graph Method Natural Convection Heat Transfer of Annular Metal Porous Medium Heat Sink of LED Numerical Investigation of a Crossflow Jet in a Rectangular Microchannel Numerical Model of Journal Bearing Lubrication Considering a Bending Stiffness Effect Numerical Study of the Influence of Refractory Thickening on the Reacting Flow and DeNOx Effect in a CO Boiler On the Design of Planetary Gear Reducer with Simple Planet Gears Parametric Study on Aerodynamic Performance of a Transonic Axial Compressor with a Casing Groove and Tip Injection Performance Enhancement of a Small Centrifugal Cooling Fan Polymerase Chain Reaction Microfluidic Devices with Integrated Water Cooling Channel Prediction of Swirl Flow and Heat Transfer through Square Duct with Twisted Tape Insert Predictions of Maximum Forging Load and Effective Stress for Strain-Hardening Material of near Net-Shape Helical Gear Forging Pressure Drop of Two-Fluid Mixtures in a Y-Typed Microchannel with Varying Cross-Section Area Reliability Test of a Rule-Based SCR Control Strategy for Cleaner Heavy-Duty Diesel Engine using Biodiesel Blend Reliable Method of a Non-Insulated Double-Pipe Heat Exchanger Residual Stress and Bead Profile Analysis of Pulsed Nd:YAG Laser Lap Welding Shape Optimization of a Microchannel Heat Sink with Phase Change Simulation and Control for Load Change Process on a Solid Oxide Fuel Cell Simulation of Airflow in the Engine Compartment of a Light Aircraft Simulation of NO Formation in Hydrogen-Air Counterflow Diffusion Flame Speed Design of Lift-Up Mechanism in a Welfare Vehicle Stability Analysis Model of a Quadruped Walking Machine at Walking up a Step Structural Optimization on Composite Blades of Large-Scale Wind Turbines The Analysis of Convergence of Shell Element with Rigid Body Displacements The Analysis of The Dynamic Characteristics on Seed Plate of The Vacuum Planters for Precision Sowing The Conceptual Design of Differential Mechanisms The Kinematic Design of Three-Speed Automatic Transmission for Electric Motorcycle The Novel Adjustable Mechanisms for Exact Multi-Path Generation The Possibility of Visualizing Temperature Fields Using Digital Holographic Interferometry Torsional Strength Analysis of Output Shaft in Portal Axle Using Finite Element Analysis Transient Simulation Method for Autorotation in Forward Flight Two-Dimensional Simulation of EM Scattering from a Rotating Circular Dielectric Cylinder Vibrational Analysis of Planetary Gear Trains by Finite Element Method Intelligent Modeling and Optimization of Carbon Anode Baking Temperature Modeling of Flyback Converter for Micro Machining Biomedical Component Chapter 3: Energy and Power Engineering Dynast – Computer Program Used in Power Engineering Efficiency Analysis of Subsystems of Compressed Air Wind Energy System Establishment of a Removable Experiment Platform for VAWT Experiment of a Tesla Engine for Wind Energy Capture Information Security Study on Innovative Power Meter System Wind Energy Potential in Taiwan Wind Energy Conversion System Power Forecasting Using Radial Basis Function Neural Network Control and System Integration of a Small Vertical-Axis Wind Rotor Coupled a Generator Having Two Windings Emergency Generators Planning for a Mass Rapid Transit System Innovated Fault Diagnosis for Power Transformer Using Hybrid Fuzzy Dissolved Gas Analysis OO-Based STATCOM Installation for Power System Loading Margin Improvement Parameter Estimation for Composite Load Model Using a Hybrid Searching Method Particle Detector for Gas Insulated Switchgear and the Effect on Environment Simulation Panel on Conductivity for Polarization and Depolarization Current (PDC) Measurement of Offline Monitoring Using LabVIEW The Effect of Electrical Switch Structure to the Contact Voltage-Drop and Temperature Variations Transformer Faults Classification Based on Polarization and Depolarization Current (PDC) Measurement Test Data on Mineral Oil Samples A Research for Site Detection Scheme for the High Temperature Superconducting Cable from the Electrical Point of View Comparative Study on Effect of Temperature & Moisture on Transformer Insulation Conductivity HVDC Switching Using Microprocessor for Polarization and Depolarization Measurement Investigation of Plasma Generator Driving by High-Frequency High-Voltage Electric Source The Energy Storage System for Light Trails Applications Based on the Supercapacitors Application of LAPUR6 to Lungmen ABWR Stability Analysis Various MTC Studies of TRACE with RCS Pressure Predictions under ATWS for Maanshan Applying Innovative Models for Forecasting Small-Area Peak Electrical Loads PV Model with Energy Balance Equation for Commercial PV Modules Critical Electric Field of InGaN p-i-n Solar Cell A Study of Solar Energy Produce Hydrogen Combine Fuel Cell Generator System Energy Billing System with Demand Control A Passive Islanding Detection Method for Grid-Connected Renewable Generation System Chapter 4: Architecture, Civil and Industrial Engineering A Study on the Development Direction of Korean Green Building Assessment by Analyzing Comprehensive Scoring Methods Fundamental Elements of Malaysia Green Highway The Analysis and Application of Architectural Meteorology for Low Carbon Buildings in Taiwan An Optimal Design for the Capacitated Hub Location Problem with Asymmetric Allocation An Investigation into the Strength of Concrete-Filled Tubes An Experimental Study on the Connection of Diaphragm in Prefabricated Bridge Analytical Simulation of Axial Behavior of RCFT Wall A Study on the GA-Based Design for Recycled Aggregate Concrete Reinforced Concrete Finite Element Analysis Incorporating Material Nonlinearity and Failure Criteria Aspects Microstructure and Mechanism of Concrete Using Inorganic Silicate Admixture The Application of MRI for Scanning Internal Cracks of Cement-Based Material Assess of the Nuclear Power Plant Structures Residual Life and Earthquake Resistance Control of Lateral Displacement for Super Tall Building by Floor & Partial 3D Brace Full-Scale Measurements on Vibrations of a 51-Story Tall Building Due to a Major Earthquake and Typhoon Local Characteristics of Light-Framed Wood Buildings in Preparation for Wind Load Response of Water Tower on Wind Induced Vibration Considering Interaction of Fluid and Structure Shear Characteristics of Large Anchorage System Two-by-Four Construction System for Earthquake Preparation Cross Modal Strain Energy Method for Damage Detection Using Limited Modal Data Curriculum Innovation for Fostering Green Building Literacy in General Education Durability Analysis on Reactive Powder Concrete as Barrier Materials for Low-Level Radioactive Waste Disposal Effective Steel Area of Fully Embedded Cold-Formed Steel Frame in Composite Slab System under Pure Bending Effects of Site Classification on Empirical Correlation between Shear Wave Velocity and Standard Penetration Resistance for Soils Energy Consumption and Potential Retrofitting of Rest and Service Areas (RSAs) in Malaysia Case Study Evaluation of Degradation of Concrete Exposed to High Temperature by Means of Ultrasonic Pulse Method Evaluation of Tip Capacity Analysis Model for Drilled Shafts in Gravelly Soils Evaluation on CO2 Emission of Light Weight Steel Housing in Taiwan Experimental Investigation of Retrofitted Extended End-Plate Connections Flexural-Torsional Buckling of Double-Angle Compression Members Geochemistry Properties of Southern Malaysian Organic Soil Impact on the Strength of Newly-Placed Concrete-Filled Tube under Earthquake Excitation Implementation of a Vibration-Based Bridge Health Monitoring System on Scour Issue Influence of Open Channel on Explosion-Induced Vibration Wave Propagation Using Acousto-Optic Coupling Technology to Investigate the Fracture Evolution of Rock-Like Materials during Inclined Shear Tests The Influence of Soil Grading and Compaction Pressure on Characteristics of Compressed Cement-Soil Materials The Appropriate Fire Prevention Technology for Historic Buildings The Application of Light Weight Aggregate Using Reservoir Sediments for Concrete Filled Columns Structural Performance of the Tensioning Air Beam System and its Analytical Modeling Structural Performance of High Strength Concrete Filled Steel Tube with the Width-to-Thickness Ratio Structural Behaviour Evaluation of Natural Draught Cooling Towers under the Consideration of Shell-Geometric Parameters Strength Performance of T-Headed Rebar in Concrete Solar Façade for a Combined Heating and Cooling System in London Simulation of Accordion Effect of I-Girder with Corrugated Steel Webs Response Spectrum Analysis of the Condensate Storage Tank in a Nuclear Power Plant Numerical Modelling of Stiffness and Strength Behaviour of Top-Seat Flange-Cleat Connection for Cold-Formed Double Channel Section Mountain Roads Design Using Ecological Engineering Methods and Traditional Engineering Methods Comparison Study Model Simplification for Offshore Platforms Using Model Refinement Scheme Live Load Distribution in Prestressed Concrete Girder Bridges with Curved Slab A Risk-Based Approach to Determine the Optimal Service Life of Steel Buildings in Seismically Active Zones Chapter 5: Environmental Sciences and Engineering. GIS Case Study on the Environmental Education Application Status for Water Recycling Facilities in Elementary and Junior High Schools in Yilan Integrating Principle Component Analysis and Canonical Correlation Analysis for Monitoring Water Quality in Storage Reservoir The Evaluation of River Conditions in the Lanyang Plain through the River Ecological Corridor Approach Sequestration of CO2 in Geological Media: A Case Study of the Saline Reservoir Using Parallel Computing for Multi-Well Injection Reservoir Drought Prediction Using Two-Stage SVM Recycling Applications of Microalgal Carbon Fixation Conducted by Taipower Probability Distribution of Tidal Elevation Data around Korean Coasts Prediction of Regolith Depth Using Topographic and Environmental Variables in the Central Mountain Division, Taiwan Mission Track Coordination Based Multi-Objective Optimization for Multi-Satellite Imaging Scheduling Loss Curve Analysis of a Debris Flow: A Case Study on the Daniao Tribe Environmental Sustainability Assessment Based on the Concept of Carbon Carrying Capacity Analysis of Spatial Distribution of the Neolithic Settlements in Zhengzhou-Luoyang Area by Using GIS Directly Georeferenced Ground Feature Points with UAV Borne Photogrammetric Platform without Ground Control Tracking Multiple Fishes Using Colour Changes Identification and Enhanced Object Tracking Algorithm Chapter 6: Medical Machinery and Technologies. Innovative Developments Bone Trabecula Surface Reconstruction for Cranium Scaffold in Bone Tissue Engineering Design and Development of Oral Appliance for Obstructive Sleep Apnea Improved Functional Approach on Hip Joint Center Estimation Measurement of the Human Cochlear Spiral Curvature In Vivo Relationships and Comparisons of Finger Surface Temperature Measurements from Three Different Kinds of Temperature Sensors The Development of the Liquid Cell Smear Device for Liquid-Based Cytology Test The Non-Invasive Measurement of Geometry of Human Ossicles Use of Data Mining Techniques to Detect Medical Fraud in Health Insurance Application of Electronic Nose Technology in Breath Tests for Patients with Diabetes Efficient RPM Method for Detecting R and S Waves of ECG Signals A Bridging Method between 2D and 3D Cephalometry Using Computed Tomography Synthesized Cephalograms A Novel Approach to Predict Schizophrenia Disease: Conceptual Framework A Study on the Control of Bio-Aerosol for Prevention of Indoor Aerial Infection Using Antimicrobial Air Filter An Application of CLPFG for Detecting Diabetes Mellitus An Expert System for 2D Stress Analysis of Human Teeth An FPGA-Based Brain-Computer Interface for Wireless Electric Wheelchairs An Improved Demon Registration with Mutual Information for Non-Rigid Medical Images An Ultra-Low Power Holter and Low Complexity Design Using Mixed Signal Processor Computer-Aided Dental Implant Technology Bed Site Health Care Video-Phone System Effects of Cardiovascular Stent Design on Wall Shear Stress Distribution in Straight and Curved Arteries Interactive 3D Simulation System for Orthodontic Treatment of Malocclusion The Study on the Correlation of Vibration Stimulation Intensity and Muscle Activity The Potential Predictors of Motor Performance Outcomes after Rehabilitation for Patients with Stroke The Encoding Analysis of Brainwave for Direction Recognition The Application of LSA in TCM Syndromes Classification Study of Quality Evaluation Indexes in Filtered ECG Signal Spatial Imaging of the Human Tympanic Membrane Solitary Pulmonary Nodule Detection on Thoracic CT Images through Object Continuity Analyses Physical Rehabilitation Assistant System Based on Kinect Obstructive Sleep Apnea Identification by Heart Rate Features Derived from Intrinsic Mode Function MID-Based Instant Transmission of Radiological Images for Emergency Teleconsultation Location-Based Service (LBS) Falling-Detection and Alarm System by Smartphone Tracking Contrast Agents from Ultrasound Image Using Texture Preserving Optical Flow Estimation The Head Shadow Phenomenon Affected by Sound Source: In Vitro Measurement Chapter 7: Sensors, Mechatronics and Robotics A Low Cost and Efficient Volumetric-Error Measurement Method for Five-Axis Machine Tools A Low Power CMOS Temperature Sensor A Real-Time Center of Gravity Trajectory Generation of a Biped Humanoid under Variable Reference ZMP Trajectory A Wave-Powered Technique for Water Column Profiling An Adaptive Nonlinear Trajectory Tracking Design for Mobile Robots and it’s Practical Implementation Analysis of the Degradation Tendency of NPP Cables Using a Wireless Cable Indenting Robot Application of Magneto Rheological Damper on Semi-Active Suspension System Backstepping Adaptive Iterative Learning Control for Robotic Systems Bayesian Estimation Algorithm Applying in Gas Detection Modules Blowers of Vacuum Cleaners Utilizing Coreless and Sensorless Axial-Flux Motors with Edge-Wire Coils Control and Response Characteristics of a Mixed Mode MR Damper for a Multi-Story Structure Control Hardware Design of a Robotic Follow Spot System Cross-Coupling Controller for Five Degree-of-Freedom Coplanar Nanostage Design and Application of Low Cost Redundancy Interface for UAV Distributed Servo System Design and Experimental Results of a Quad-Rotor Control System Design and Performance Evaluation of Modular Electro-Mechanical Actuator Design for a Novel Electromagnetic Valve for Camless SI Engines Development of a Web-Based Virtual Five-Axis Milling Toolpath Simulation System Development of an Onboard Automatic Tire-Wear Warning System Development of the Searching Algorithm with Complexity Environment for Mobile Robots Dynamic Characteristics and Finite Element Model Updating of Micromachined Torsion Structures Dynamic Stiffness Effects on Robot Safety and Performance in Human-Friendly Robots Embedded Force Control Gripper for Frangible Fruit Robotic Manipulation Evaluation of Analytical and Finite Element Modeling on Coupled Field Dynamics of Piezoelectric Cantilever Bimorph Harvester Fast Development of Flexible Motor Control System with Model Based Design Force and Position Control of the Pneumatic Cylinders through a Microscope with a CCD Camera Improving the Accuracy of Depth Estimation in Binocular Vision for Robotic Applications Mechatronic System Design for Science/Work Class ROV Micro Pressure, Temperature and Flow Sensors for Integration in Micro Methanol Reformer Motion Planning of Multiple Pattern Formation for Mobile Robots New Fault-Tolerant Scheme for Flight Control System of Unmanned Aerial Vehicles Panda Robot: Kinematic Design and Simulation for Quadrupedal Walking Passivity-Based Parameter Estimation and Position Control of Induction Motors via Composite Adaptation Piezo-Actuated Micro-Drilling Process Control by Using an Adaptive Sliding Controller with Fuzzy Compensation Quasi-Static Step Number Determination Method of a Quadruped in Step Crossing Realization of a Motion Control System for Wafer-Handling Robot Using SoPC Technology Real-Time Navigation for a Humanoid Robot Using Particle Filter Robust Adaptive Trajectory Control for an Omnidirectional Vehicle Studies on the Exchangeability of Different APT Interpreters for 5-Axis Machine Tool Applications Synthesis of Two-Degree-of-Freedom Rotational Decoupled Manipulators of a 2R-Type Branch System Identification and Robust Control of a Pneumatic Muscle Actuator System The Effect of Thermal Contact Resistance on Heat Management in a Shuttling PCR System The Fault Tolerant Output Selector Based on Fault-Detection Considering Realistic Fault Modes for Pedal Simulator of Brake-by-Wire System The Nonexistence of Three Degrees of Freedom Rotational Fully Decoupled Parallel Mechanism The Performance Analysis of an AKF Based Tightly-Coupled INS/GNSS Sensor Fusion Scheme with Non-Holonomic Constraints for Land Vehicular Applications The Squeeze Film Damping Effect on Dynamic Responses of Micro-Electromechanical Resonators The Vibration Problem Studying in Micro Actuator System Using the Differential Transformation Method T-S Fuzzy Tracking Control of a 2-DOF Rehabilitation Robot Using System Identification Unmanned Vehicle Obstacle Avoidance Using Single Sensor Scan Method and Danger Zone Estimation A Channel Reuse Procedure in Clustering Sensor Networks A High Sensitivity Index Sensor Based on No-Core Fibers A Learning Concentration Detection System by Using an Artificial Bee Colony Algorithm A Low Cost System for 3D Motion Analysis Using Microsoft Kinect A Novel Energy Efficient Joint Dynamic Emissive Location-Based Routing Scheme for SOFAR Channel Underwater Sensor Networks A Novel Wireless Thermal Convection Type Angular Accelerometer Integrated with an Active RFID-Tag A Positioning Scheme Combining Kalman Filtering with Vision Assisting for Wireless Sensor Networks A Robust Occupancy-Based Building Lighting Framework Using Wireless Sensor Networks A Study on the Implementation of Dynamic Routing Algorithm to Improve Efficiency for Wireless Sensor Networks An Efficient Positioning Algorithm Based on PID in Indoor Spaces Using RFID Technology Design and Fabrication of the Piezoelectrically Actuated Micropump with Implanted Check Valves Development of a Portable Automated Piano Player CantaPlayer Dynamics of New Electromagnetic Valve in Camless Engines Energy Efficient Sensor Configuration by Fishing Spider Inspired Mechanism Estimation of Occluded Lower Limb Using Inverted Pendulum Model Grade Diffusion Algorithm Grating-Coupled Surface-Plasmon-Resonance Biosensor Discs with a C-Type Fluidic Channel for Monitoring Growth of Self-Assembled Monolayer Implementation of Lane Departure Warning System Based on Machine Vision Iterative Learning Control of a Piezo-Actuated Positioning Stage for Micro/Nano Manipulation Windshield Warning System for Intelligent Vehicles Visual Servo Tracking Control for Slider Robot Using CMAC Neural Network Recognition Approach Two Fluid Mixing in a Micromixer with Helical Channels and Grooved Surfaces Train Detection by Magnetic Field Measurement with Giant Magnetoresistive Sensors for High-Speed Railway The Single-Pass Perceptual Embedded Zero-Tree Coding Implementation and Optimization on DSP The Box-Cox Transformation-Based ARFNNs for Identification of Nonlinear MR Damper System with Outliers and Skewness Noises Study on One-Dimensional Scanning Semiconductor Lidar Self-Tuning RBFNs Mobile Robot Systems through Bacterial Foraging Particle Swarm Optimization Learning Algorithm Scaling Issues of Micro Catalytic Reactors Robot Simultaneous Localization and Mapping Using Speeded-Up Robust Features Reliable Cluster-Based Routing Algorithms in Wireless Sensor Networks Reaching Agreement in a Dual Fallible Cluster-Based Wireless Sensor Network pH Value Detection with CLPFG Sensor New Type Small-Angle Sensor Based on Multiple Total Internal Reflections and Attenuated Total Reflections in Heterodyne Interferometry Multi-View 3D Object Reconstruction Using Coordinate Transformation Low Luminance Dynamic Range Converter for Vehicle Application New Drift Reset Method for Pedestrian Tracking with a Low-Cost IMU Visualization in a Virtual Laboratory: An Approach Using a Collaborative Simulation for Electro-Mechanical System Chapter 8: Automation and Control A Novel and Experimental Design for Mechanical Ventilation with Optimal Spontaneous Flow Pattern and WOB Feedback Control A Novel Hybrid Recurrent Wavelet Neural Network Control for a PMSM Driven Electric Scooter Achieving Passive Integral Control Using Feedback and Output Redefinition Adaptive Single-Neuron Proportional-Integral-Derivative Controller Based on Memristor Advanced Mode Control Strategies for Inverter Based Distributed Generators in Micro-Grids An Intelligent Garbage Can Decision-Making Model Evolution Algorithm on Optimal Design of Fuzzy Controller of Intelligent Lighting Systems Assembly Sequence Planning Based on Max-Min Ant Colony System Delayed State Feedback Control for Singular Plants with Device Delay Design and Experiment of Iterative Learning Controller Based on Particle Swarm Optimization Approach with New Bounded Constraints Technique Extension of Elementary Siphons in a Class of Generalized Petri Nets Fuzzy Simplex-Type Sliding-Mode Control Intelligent Sliding-Mode Control for Knee Rehabilitation System Interacting Multiple Model Particle Filters for GPS/INS Integration MRF Hydraulic Mount System of Coach and Research of its Fuzzy Control PID Controller Tuning by Differential Evolution Algorithm on EDM Servo Control System Pitch Attitude Control Design of Unmanned Aerial Vehicle via Hardware-in-the-Loop Simulation Quality Inspection of the Riveting Process by Neural Networks Real-Time Breakthrough Detection for Laser Drilling Based on Coaxial Visual Sensing Technology Remote Filter Design for Discrete Singular Systems Research on the Fuzzy PID Controller Based on PLC Applied in the Cold Pellet Production Robust Adaptive Controller Design for a Quadrotor Helicopter Robust Control Design Based-On Integral Sliding-Mode Control Robust Exponential Stability for Uncertain Neutral Systems with Interval Time-Varying Delay and Nonlinear Perturbations Robust Finite Time Controller Design for Second Order Underactuated Mechanical Systems Signed-Distance Fuzzy Sliding Mode Position Control for an Energy-Saving Electro-Hydraulic Control System Sliding Mode Control for the Dual-Excited and Steam-Valving Control of Synchronous Generator Sliding-Mode Tracking Control of a Precision Stage Switching-Type Self-Tuning Fuzzy PID Control of an Active Magnetic Bearing System Takagi-Sugeno Fuzzy Estimator Design for Adaptive Vector Control Systems The Study on Robust Controller Synthesis Using Genetic Optimization Algorithm Integrating Taguchi Methods Voltage Control of PM Synchronous Generator System Using Recurrent Wavelet Neural Network Controller Wind Shear Encountered Landing Control Based on CMACs Design of Robust and Non-Fragile Kalman Filter with Polytopic Uncertainties: PLMI Approach Adaptive Temperature Set Point of Air Handling Units Using Fuzzy Logics High Performance Power Conditioning System Using Dynamic-Game-Theory-Based Variable Structure Controller Designing and Realizing of Universal Test and Analysis System of Avionics Data Bus Developing an Expert System of Failure Analysis GA Based Hybrid Fuzzy Rule Optimization Approach for Elevator Group Control System Green Transport System: A Technology Demonstration of Adaptive Road Lighting with Giant Magnetoresistive Sensor Network for Energy Efficiency and Reducing Light Pollution Infrastructure Damage Reporting System with Location Awareness To Develop a Parallel Processing System with the FPGA for Multi-Axis Motion Control Platform Real-Time Vehicle License Plate Recognition Based on Scanning and 2D Haar Discrete Wavelet Transform Performance Improvement of Wild Flower Boundary Extraction in Complex Background Missile Guidance Algorithm Design Using Particle Swarm Optimization Using Bayesian Networks in Gear Fault Diagnosis Chapter 9: Electronics, Electrical Engineering and Power Electronics A Low Power CMOS Bulk-Controlled Sub-Harmonic Mixer for LTE-Advanced Applications A Novel Data-Oriented Methodology for Designing Complex SOC System with Bluespec SystemVerilog A Quick Response Power Factor Detector for Nonlinear Loads A Single-Phase Soft-Switching Unipolar PWM Rectifier A Single-Switch HPF AC-to-DC Converter with Low Voltage Ripple A Study of Eliminating the Protective Coordination Curve Intersection of Electromechanical Overcurrent Relays in Subtransmission Systems A VLSI Architecture of 2-D Discrete Wavelet Transform for Reducing Computation Time Airborne Panel Series Circuit Module Test System Software Design Analysis and Design of the Active Clamp Forward Converter as a Color LED Driver Approach to Developing Interleaved Converter with Single-Capacitor Turn-Off Snubber Characteristics of Memristor Series-Parallel Connection Circuit with Applications Coordinated Converter-Charger for Hybrid Fuel Cell-Battery Power Sources Design and Implementation of a Fuzzy Time-Varying Sliding Regime Controlled UPS Systems Design and Implementation of a Novel High-Step-Up DC-DC Converter Design of Clock and Ramp Generator Circuit Framework with 0.9V Low Operational Voltage Design of High-Efficiency Voltage-Mode Class-D RF Power Amplifier for Class-S Transmitter Using Signal Analysis and Additional Multi-Section Bandpass Filter EMC Issues of Low Frequency Interference of Power Electronic Converters Implemented LDO Chip With Output Capacitors Free Low-Power Fast-Settling Low-Dropout Regulator Using a Digitally Assisted Voltage Accelerator for DVFS Application Twisted-Overlap Differential-Pair Approach to Increase Available Layout Space and Reliability in PCB Design Design and Implementation of a Dimmable LED Driver with Low-Frequency PWM Control Improvement on Resistive Switching Characteristics of SiO2-Based Films by Voltage Stressing Interleaved Boost Converter with Boost-Type Snubber for PV Power System Interleaved Soft-Switching Converter with L-C-D Snubber for Reflex Charger Towards Motion Recognition on Smartphone Resistive Switching Characteristics in Nanocrystalline Silicon Films for Conductive-Bridging Resistive Random-Access Memory Applications Predicting Equation of Transient Position-Probability Density for Nano-Tunnel Problem in SET Performance Evaluation for Dynamic Voltage and Frequency Scaling Using Runtime Performance Counters Monte-Carlo Analysis of a New 6-T Full-Adder Cell for Power and Propagation Delay Optimizations in 180nm Process Chapter 10: Communication, Optoelectronics and Optical Systems Analysis, Selection and Control of Optimal Driving Current Combinations in Wavelength Switching for DBR Lasers An M-Z Interferometer Coupled with a Ring Resonator for Sensing A Three-Dimensional Position System Using Digital TDE Receiver and Cylindrical Array Antenna Analysis and Signal Recovery of Modulated Wideband Converter with Gain Mismatch Behavioral Modeling and Design of Predistortion for Wireless Transmitters with Multi-Branch RF Power Amplifier Design and Implement of Multi-Antennas for High Data Rate Communication Design of DDS-Like Clock Generator Using Bidirectional Integration A Cooperative Relay Scheme Based on Constellation Expansion Ergodic Channel Capacity of MIMO Transmission in Spatial Correlated-Fading Estimation of OFDM Carrier Frequency Offset Robust to Offset Variation High Gain and Low Noise Single Balanced Wireless Receiver Front-End Circuit Design Partition-Based Hybrid MIMO Decoding Schemes with Combined Depth- and Breath-First Search The Performance Comparison of Sub-1GHz Wireless Personal Area Monitoring Systems A Cluster-Based Countermeasure against MAC Layer Attacks in IEEE 802.11 MANETs A Study of Bipolar Walsh-Hadamard Coding Method in Optical CDMA Networks A Study of Modified Prime Codes Optical CDMA for Wired-Wireless System Optimization Algorithm of the Repeaters Distribution by Square and Cellular Model A Tracking System with Location-Based Delivering for Reducing Short Message Transmissions Robust MVDR Estimation via Polynomial Rooting for MC-CDMA Carrier Frequency Offset An Incentive Mechanism Using Game Theory for Wireless Mesh Networks Cell Planning for Base Station in Mobile Communication Using an Improved Genetic Algorithm Design of a LED Module with Special Constraint Design of an Optical Mechanical System for High-Resolution Encoders Design of Precise Lightweight Mirror Design of the Light-Emitting Diode Vehicle Projector Headlamp System without Shield Development of a Light Guide Film with Optimal Design and Roll to Roll Microfabrication Technology Dynamic Throughput Optimization in Wireless Multi-Hop Networks Error Analysis of Ray’s Light Path for Axis-Symmetrical Optical System by Using Skew Ray Tracing Field Distortion Compensation for Galvanometric Scanning Machines Gateway Placement under the Consideration of the Starvation of TCP Flows in Wireless Mesh Networks HARQ Performance Analysis in IEEE 802.16m System High Efficient Color-Separation Backlight High-Sensitivity Sensor Using Frequency Sweeping Generated Ringing Effect in Single-Mode Fiber-Loops Interactive Design and Simulation for Luneberg Lenses The Effect of the Broken Edge on the Concentricity of the Micro-Polished Optical Fiber End-Face A Field Emission Light Source Using Reflective Metal Groove Anode and Long Narrow Stripe Cathode Trim Down Redundant Transmission in Data Synchronization Time-Efficient Route Optimization in PMIPv6 Throughput Analysis for IEEE 802.11e Enhanced Distributed Channel Access The Yellow-Ring Measurement of White LED by the Reflective Lightspot Method (RLM) The Telescope Primary Mirror Isostatic Mount Bonding Position Analysis The Optical Response of Trapezoidal Comb-Like Nanostructures The Effect of the Different Core Layer on Polymer Asymmetric Bragg Couplers The Convergence Rate on Distributed Network Utility Maximization in Wireless Mesh Networks The Characteristics of All-Optical Switching and Modulation in Phenoxy-Phthalocyanines Liquid Symmetric NAT Traversal Method for Session Initial Protocol (SIP) Simulation of Thermal-Optical Effects on a PMMA Fresnel Lens Used in Solar Concentrators RSVP Extensions for Mobility Management in Heterogeneous WLAN/WiMAX Networks Performance Analysis of Reactive FHCoP-B in Nested Mobile Networks Performance Analysis and Improvement on SIP-Based VoIP Server Partial Bit Strings Pruning Channel Assignment in Multi-Rate Multi-Channel Wireless Networks Packet Loss Concealment Using Dual-Side Waveform Similarity Overlap-and-Add Near-Infrared Electro-Optics Modulation Coding Technology Using the Aperture Module with the Changeable Stop Multimode-Interference-Based Waveguide Crossing in Two-Dimensional Cubic Photonic Crystal Multi-Colored LED Control System Implemented in Programmable SoC with Subset of DMX512 Specification Microsphere Coupled Mach-Zehnder Interferometer for Biochemical Sensor Measurement and Analysis of Loss for Long-Period Photonic Crystal Fiber Gratings LED Color Mixing Mechanism Design Confidential Enhancement with Multi-Code Keying Reconfiguration over TS/WH OCDMA Networks Distributed TXOP Allocation Scheme in IEEE 802.11e Wireless LANs Measurement and Simulation of System Performance of Digital Broadcasting System Chapter 11: Methods and Algorithms for Processing and Analysis of Data A Generalized Frame-Level FSBM FLSA Architecture An Efficient Heuristic-Based Algorithm for Path Tracking Using Wireless Signals An Improvement to Tree-Structured Vector Quantization Application of Evolutionary Programming for Switch Strategy Decision of Distribution Systems with Load Variations Hydraulic System Fault Diagnosis Based on EMD and Improved PSO-Elman ANN The Dynamic LMS for Line Echo Cancellation Use of the Fuzzy-Based Taguchi Method for the Optimization Design of an Ultrathin Centrifugal Fan 3D Angle Searching System with PSO for Face Recognition 3D Image Encryption Using Integral Imaging Scheme and MLCA Technology A Coded Digital Watermarking Recognition Using Neural Network Method A Forward Moving Method for Continuous Nearest Neighbor Queries A Memetic Algorithm for Mixed-Integer Optimization Problems A Multi-Criteria Image Quality Evaluation Scheme A New Algorithm Based Orthogonal Arrays for Design of Experiment on Nonlinear Functions A New Evolution Algorithm: Cultural Evolution Algorithm for Global Optimizations Novel 3-D Image Encryption Using Computational Integral Imaging and Linear-Complemented MLCA A Novel Region-Based Approach for Automatic Road Extraction from High Resolution Satellite Images A Real Time Hand Gesture Recognition System Based on DFT and SVM An Algorithm of the Misconception Order An Efficient Genetic Encoding Scheme for Multiplierless Color Space Converter Design An Efficient Neural Network Model with Taylor Series-Based Data Pre-Processing for Stock Price Forecast An Efficient Secret Image Sharing Scheme An EigenMLLR-Like Eigen-FLS Approach for Speech Pattern Recognition Automatic Facial Aging/Rejuvenating Synthesis Method Automatic MIDI Genre Conversion Chinese Semantic Word-Formation Analysis Using FKP-MCO Classifier Based on Layered and Weighted GED Building a Post-Search Academic Search Engine Based on a Serial of Clustering Methods Building a Multi-Classifier System in a GA-Based Learning Environment Combined Probabilistic and Possibilistic Used to a Build Type-2 Fuzzy Clustering Algorithm Model Data Mining Based Intelligent System for Voting Behavior Analysis Detection of Content-Aware Image Resizing Using Seam Properties Efficient Hardware Architecture for Kernel Fuzzy C-Means Algorithm Enhanced Artificial Intelligence Algorithm for Optimal Unit Commitment Problem Estimation of Distribution Algorithms with Matrix Transpose in Bayesian Learning Exploring the Factor Effect of Learning Vector Quantization in Artificial Neural Networks Fast Depth Generating Algorithm From Binocular Images Flower Image Recognition Using Multi-Class SVM High Order Lambda Measure Based Choquet Integral Composition Forecasting Model High Resolution Time-Frequency Analysis Base on Ricker Atom Matching Pursuit Decomposition Human Body and Body Part Movement Analysis Using Gyroscope, Accelerometer and Compass Human Hand Movement Analysis Using Principle Component Analysis Classifier Image Segmentation Based on Poisson Equation Imperialist Competitive Algorithms with Perturbed Moves for Global Optimization Unsupervised Mining of Visually and Temporally Consistent Shots for Sports Video Summarization Theoretical Approach to Reduced Q-Matrix for Cognition Diagnosis Solve the Routing Optimization Problems with Foraging Game Theory Significant Features Selection Resistant to Temporal Distortions Robust Image Process of Corresponding Lines Using Moving-Window Method Reversible Data Hiding Exploiting Coefficients Histogram in Wavelet Transform Domain Research on Cellular Artificial Bee Colony Algorithm and its Computational Experiments Pareto Ensembles for Evolutionary Synthesis of Neurocontrollers in a 2D Maze-Based Video Game Palmprint Verification for Images Captured in Peg-Less Scenarios Non-Uniform SURF Feature Point Detection and Matching Moments and Parametrizing Construction for 3-Band Biorthogonal Scaling Coefficients Macro Segmentation and Content Analysis of TV Broadcast Stream Lane Detection and Predicting Algorithm Based on Randomized Hough Transform LemK_MSA: A Multiple Sequence Alignment Method with Sequence Vectorization Based on Lempel-Ziv Chapter 12: Computer and Information Technologies A Web-Based Android Supervisory Control System A Web-Based Arduino Supervisory Control System An Efficient Control System for Combating Cybersickness in the Elderly within a Virtual Store Design and Realization of Smart Objects-Search System Based on RFID Hardware/Software Co-Design of 2D-to-3D Video Conversion on FPGA Study on Communication Protocol Application in Smart Grid A Design of Smart Dressing System A Flexible and Scalable Cooperative Surveillance Technique Using Integrated Ontology Reasoning A Functional Test Bed for Producing Virtual Human's Human-Like Movement Based on Limited Perception A Modified Least Significant Bit Embedding with Error Correction A New Front-End Anonymity and Back-End Real-Name Mechanism in e-Commerce A Novel Optimal Routing Strategy for Internet of Things’ Machine-to-Machine Network under Time Constraint A Preliminary Study on Non-Intrusive User Authentication Method Using Smartphone Sensors A Proposal for a Schema for ARP Spoofing Protection A Security and Efficiency of Authenticated Key Exchange Protocol for Wireless Mobile Ad Hoc Networks A Study of Cloud Computing Based Intelligent Scheduling System for Manufacturing Quality A Term Matching Strategy for Item-Banks Integration Neighbor-Index Method for Continuous Window Queries over Wireless Data Broadcast A Uniform and Coherent Mashup Technique Based on the OSGi Framework An Adaptively-Guiding Web-Based E-Learning System Based on Competency-Based Learning Theory An Annotation Watermarking Approach to Image Tagging for Relevant Information Retrieval An Efficient Game Level Generation in Web-Based Serious Game An Efficient Partitioning for Object-Relational Data Warehouses An Experimental Platform for Cross-Language Document Retrieval An Implementation Model of RFID Information Security and Privacy An Innovative but Low-Cost E-Payment Mechanism and its Extension to E-Ticketing and E-Identity Document Applications Analysis and Design of Semantic Web Services Using MDA and SBC Structure Analysis of Convective-Radiative Fins by Using Hybrid Spline Difference Method Analytic Network Process Decision-Making to Downloadable Content System Annotation System for the Construction of Synchronous Grammar Tree Alignment Relationships Classification of Photovoltaic Research Papers by Using Text-Mining Techniques Cloud Based Evolution Algorithm with Feedback Control for Emergency Logistic Cluster Search Engine Results with Crowd Intelligence Cryptanalysis and Improvement of a Unique Batch Authentication Protocol for Vehicle-to-Grid Communications Defend a System against Keyloggers with a Privilege-Limited Account Design and Implementation for the Secure ID Management System Based on Virtualization Design and Implementation of a Low-Cost Scalar Multiplier-on-Chip for Elliptic Curve Cryptosystem Designing and Realizing of UAV Simulation System Efficient Book Recommendation System Based on a MapReduce Model Enhancement of Consistency of UML Diagrams by Cross Checking Rules Expansion-Free Grayscale Image Sharing Using Meaningful Share Images Exploiting Mobile Devices to Assist Identification System of Photos for Social Relationship Full Multiplexers Implementation of Dual Basis Multiplier over GF(2m) GPU Computation for Online Realtime Multi-Pattern Matching How to Enhance MIFARE System Security in the Current Crypto-1 Broken Status Implementation of Internet Audio Transmission System via Clock Correction Improved on Date Attachable Electronic Cash iTagger: Part-of-Speech Tagging Based on SBCB Learning Algorithm JokerBot – An Android-Based Botnet Web-Base Virtual Collaboration in E-Learning System Voice Communication Network Quality of Service Estimation and Forecast Based on Cloud Model Visualization of Nanomanipulation Using an Interactive Virtual Environment Virtual Prototype Design and Test-Simplifying the CAD/Analysis Interface Video Query Using Temporal Signature and Similarity Matching Video Quality Adjustment Model Supporting Mobility for Seamless Multimedia Service Delivery Tile-Based Panoramic View in Mobile Devices Three Dimensional Vision Conversion Based on Cloud Computing Shoulder-Surfing Resistant Smartphone Authentication Scheme Using Virtual Joystick Security of Cloud Computing Lightweight Authentication Protocol Research on Sequence Query Processing Techniques over Data Streams Research on Domain Ontology-Based Concept Similarity Calculation Reliable Detection of Histogram Shift-Based Steganography Using Payload Invariant Features Proven Security and Efficiency of Gap Diffie-Hellman Group Blind Signature in E-Commerce Performance Evaluation of a Hadoop-Based Secure Cloud Platform Multi-Clouds Framework for Enterprise Application Integration with Intelligent Agents Management of Abstract Algebra Concepts Based on Knowledge Structure LSO-AdaBoost Based Face Detection for IP-CAM Video L-System Controlled Music Expression through Visual Language Framework Computer Assisted Language Learning and Gray Model for Promoting Phonics Learning in Continuing Education E-Learning Interface Management Temporal Navigation in a Session in a Mobile Distance Learning System Learning for Shadow Puppet’s Action Control Inverse Kinematics Method Chapter 13: Innovation Management, Product Design and Engineering Management An Illustration of Low-Cost and Intuitive Innovation Challenging Long-Standing Industrial Standards and Practices Analysis of Professional Competence Required by the Wind Energy Industry Practitioners Application of Systematic Innovative Method to Improve the Structure of Magnetorheological Damper Dodge-Romig LTPD Single Sampling Plan under Quality Investment and Inspection Error Identifying Constraints Regarding Power Usage Effectiveness for Data Centers Engaging in Demand Response Programs Long-Term Unit Commitment Solution Based on Load Pattern Multi-Dimensional Assessment for Residential Lighting Demand Side Management: A Proposed Framework A Decision Support System for the Operation of Vending Machine Supply Chains with Product Substitution and Varying Vehicle Speed A Discussion on the Impact of the Integration and Splitting Models on the Operational Efficiency of Medical Centers in Taiwan A Genetic Algorithm for Improving Efficiency of PERT A Study of Design Demand of Applying Quality Function Deployment in Plastic Folding Chairs A Systematic Approach to Quality Function Deployment with Extension Method An Enterprise Architecture Approach Based on DoDAF Application of PLS-SEM to Assess the Influence of Construction Resources on Cost Overrun Building a Maturity Model of Information Security Governance for Technological Colleges and Universities in Taiwan Construction of System Dynamics Model on Service Strategy and Resource Management Efficiency Improvement for Multi Depot Vehicle Routing: A Case Study in Cash Distribution Evaluating and Benchmarking Productive Performance of Shipping Companies Improving Operability of SmartUAV in Navigable Airspace of Korea Intelligent Decision-Making on Modular Products Using Fuzzy Algorithms The Study on the Functional Element Representations for Bicycles with Creative Characteristics Supply Chain Pricing Strategy for Short-Lived Ramp-Type Demand Models Research on Optimized Problem-Solving Solutions Selection of the Production Process Optimizing Bi-Objective Imperfect Preventive Maintenance Model for Multi-Component System Using a Proposed Improved PSO Algorithm Multiprocessor Flow Shop Scheduling Problem with Common due Window Measuring the Capability for One Process with Spherical Tolerance


Best Sellers


Product Details
  • ISBN-13: 9783038139935
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3038139939
  • Publisher Date: 25 Jan 2013
  • Binding: Digital download and online
  • No of Pages: 3818


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Innovation for Applied Science and Technology
Trans Tech Publications Ltd -
Innovation for Applied Science and Technology
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Innovation for Applied Science and Technology

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!