This volume of the journal is collected from the papers that were presented at the 6th International Conference on Industrial Engineering (6th ICIE, 18-22 of May 2020). In the 2020 year, ICIE was held as a virtual conference due to the pandemic of COVID-19. The collected papers reflect the last results of scientific research and engineering decisions in the area of materials science and technologies of materials synthesis, production, and processing.

Table of Contents:
Preface Chapter 1: Polymers, Composites and Ceramics Development of New Composite Materials from Tetra Pak Packaging Waste Research of Hardness of Polymer Composite Materials Based on Silicone and Aluminium Hydroxide with Various Mechanical-Chemical Processing Features of the Titanium Alloy Nanofibers Production for Neurosurgery and Ophthalmology Development of Accelerated Weather Testing Procedure for Materials of Polypropylene Tanks Study of Causes of Plastic Pipe Failures Influence of Nano-Modification on Structural, Mechanical and Physico-Chemical Characteristics of Bentonite Investigation of Temperature Deformations and Burning of Models from Polymers Heat-Resistant Composite Materials on the Base of Mica and Glass Study of Whiskers to be Used in Composite Materials Synthesis and Catalytic Properties of CoFe2O4/Fe2O3 Nanosized Composite Material Investigation of the Influence of Kinematic and Energy Parameters on the Structure and Strength of Explosion-Welded Steel-Aluminum Composite Increasing the Uniformity of Nano-Dispersed SiO2 Distribution in Polymeric Binder of Composite Material A Study of Reactivity of Model Compounds of Lignin Biopolymer Experimental and Numerical Study of the Hybridisation Effect on the High-Velocity Impact Resistance of Thermoplastic Composites Based on Aramid Fabrics Ceramics Based on Nano-Modified Alumino-Silicates A Study on Chemical Durability of Fiberglass-Reinforced Plastic in NaOH Environment The Way of Utilization of Fused Corundum Dust Waste for the High-Alumina Chamotte Production Synthesis of YFeO3-d and LaFeO3-d Perovskites with High Catalytic Activity in Carbon Oxidation Reactions Stress State of 3D-Printed Plastic Dies at Thin-Sheet Aluminum Bending Organic-Inorganic Composite for Extraction of Platinum(IV) Studying the Performance of Composites Based on Thermally Modified and UV-Treated Wood Synthesis of Amorphous Zirconium Dioxide from Zirconyl Nitrate in Presence of Oxalic Acid Modeling of Grinding Technology Fibrous Materials in the Production Process Technology for Preparation of Hybrid Sorbents Based on Plant Raw Materials and Montmorillonite Model and Results of a Study of the Synthesis of Finely Dispersed Silicon Carbide in an Electro-Thermal Reactor Study of the Water-Glass Role in the Foam Glass Synthesis Using Glycerol Foaming Agent Mechanical Properties of Bio-Composites Based on Polymer Blends of Ethylene-Vinyl Acetate Copolymer and Polyethylene with Natural Fillers Synthesis of Highly Dispersed Spherical Metal Granules by Laser Ablation Method Kinetics and Adsorption Ions of Heavy Metal by Modified Alumino-Silicates Processing of Alumina Reinforced Copper Metal Matrix Composite by Selective Laser Melting Technology Alumina Reinforced EP648 Metal Matrix Composite Produced by Selective Laser Melting Powder Bed Fusion Additive Technology Diagnostic of Structural Changes in Ferromagnetic Powders during Milling in Beater Mill Resonance Method of Determination of Interacting Force of Particles in the Cluster of Ferromagnetic Material Chapter 2: Steels and Alloys, Metallurgical and Metalworking Technologies Studying the Effect of Tempering Temperature during Heat Treatment on the Corrosion Resistance of 13Mn6 Steel Samples Research into the Effect of Speed Mismatch during Continuous Rolling on the Process Parameters Micro-ECM of the Aerodynamic Surface Understating Structural Heredity of Cast Iron in Bimetallic Products Prediction of Mechanical Properties of Ti-6AI-4V Titanium Alloy Bars Depending on Aluminum and Molybdenum Strength Equivalents The Technology of Distortion-Free Quenching in a Magnetic Field of Thin-Walled Details of the Ring Form Forging Process Flow Development for Plate Production Formation of a Gradient Structure in Austenitic Stainless Steel AISI 321 by Radial-Shear Rolling Microstructure of the Heat Treated Advanced Low Carbon Steel Contact Potential Difference as a Non-Destructive Testing of Steel Isothermal Heat Treatment of the Low-Carbon Martensitic Steel Testing the Cross-Sectional Microhardness in Sheets with A 0.08% Carbon Concentration High Performance Process Development for Iron Ore Concentration Determination of Key Parameters Required to Optimize Calcination Process in Ferrous Metallurgy Heating Plants Modeling Process of Semi-Continuous Extrusion of Hollow 6063 Aluminum Alloy Profiles Using QForm Extrusion Mechanism of Solid-State Amorphization in the Fe-Si-Cu-Mg-O System Bending Steel Billet on Presses of Tube Electrical Welding Aggregation Forecasting the Microstructure of a Microalloyed Steel Plate Strip The Effect of Microstructure and Temperature Gradient on Radiation-Induced Swelling of Austenitic Steel Selection of Rational Deformation Pressing Modes in a Special Device Formation of Structure and Properties of 30HGSN2A Steel at Technological Stages of Manufacture of Heavy-Loaded Parts Fracture of Electron Beam Welding Joints of Titan Alloys The Density of Deformations Distribution on the Side Edges during Strip Rolling On the Use of Photometric Separation for the Processing of Techno-Genic Raw Materials Studying Aluminum Alloy Defects Modifying and Micro-Alloying Effect on Carbon Steels Microstructure Friction Stir Welding of the Carbon-Doped Dual-Phase High Entropy Alloy Experience of Using Complex Modifiers to Increase Corrosion Resistance of Pipe Steels Evaluation of the Effect of Holding the Mandrel in the Extreme Position of the FQM Mill on the Formation of Surface Defects Investigation of Temperature-Time Modes of Rolling of Thick-Sheet Steel and Mechanical Properties of Finished Products Pyro-Metallurgical Processing of Ilmenite Concentrate with Production of Iron and Titanium Oxides Metallization of Oolitic Iron Ore after Oxidation Firing Thermal State Simulation of Welded Steel Plates under Laser Welding Conditions Seamless Pipes Manufacturing Process Improvement Using Mandreling The Effect of Boron, Manganese and Sulfur on the Microstructure and Mechanical Properties of Pipe Steel 17G1SU The Evaluation Model Efficiency of Ladle Graphitizing Inoculation of Cast Iron Technology and Equipment for Rolling of Bimetallic Bars with Multilateral Reduction To the Question of the Manufacturing Ability a Contact Wire by Continuous Casting Rod The Study of the Copper Alloy Structure and Properties Influence of the Melt Treatment Method on the Properties of Cast Iron Influence of Type and Consumption of Pellets on Indicators of Blast-Furnace Smelting in the JSC Ural Steel Design of Pipe Steel Hot Rolling Technological Process Based on System Analysis Investigation of the Effect of Tungsten Carbide (WC) Nanopowder on Iron-Based Powder Structural Materials Evaluating Plasticity of Alloy AD31 on Ingot Height Influence of External Action on the Internal Structure of Continuously Cast Slab Produced from Tube Steel Phase Transformations in the Quenched Alloy Based on Orthorhombic Titanium Aluminide during Heating Interrelation of CCM (Steel Billet Continuous Casting Machine) Tube Steel Casting Parameters and Hot-Rolled Plate Quality Criteria of Material Failure in Relation to Hydrogen Saturation Production of Primary Silumins Ingots Modified with Strontium Influence of Temperature and Holding Time on Number and Size of Metal Particles during Solid-Phase Reduction of Iron by Carbon Development of Cast Cobalt Alloy for SRP Valve Pairs Simulation of Process Rolling Plates from Alloy of Al-Mg System Economically Doped with Scandium Study of Metal, Silicon Carbide Crystals and Ceramic Bond Transfer to the Surface of Titanium Alloy during Grinding Transfer of Abrasive Material at Grinding a Titanium Alloy with a Wheel of Cubic Boron Nitride Specific Features of Statistical Analysis for Grain Nanostructures Formed by Solid-State Diffusion at Annealing Microstructural Features and Properties of Al-Cu-Mg Alloy Containing Silver and Cerium Development of New Methods for the Production of Large-Diameter Double-Seam Pipes Dry Mixes for Casting Manufacturing in Single and Small-Scale Production Selective Laser Melting AlSi12 Alloy by Utilizing of Non-Spherical Air-Atomized Powder Characteristics of Powders from Different Aluminum Alloys for Additive Technologies Obtained by Gas Atomization Modeling the Production Technology of Fully-Pressed Bi-Metal Powder Materials and Products The Concept of Dumping Nickel Slag Processing with Preliminary Extraction of Metals Development of Arc Welding Technology with Support of Stability of Electrode Melting Process Researching of the Efficiency on the Application for Complex Processing in Obtaining the Different Types of Surfaces Research of Mechanochemical Corrosion of Steels ?1020 and ?516-55 Chapter 3: Chemical and Hydrometallurgical Technologies The Use of Phosphate Compositions for Chemical Treatment of Make-Up Water in Centralized Heat Supply Systems Mathematical Model for the Kinetics of Heterogeneous Reaction of Carbonates Dissociation in the Process of Roasting in the Presence of Temperatures Gradients in Phosphate Raw Material Studying the Possibility of Obtaining Titanium Powder of Various Sizes by Alumino-Thermic Reduction The Chemical Technology for Producing Precious Metals from Enrichment Rejects of Copper-Pyrite Ores Electrochemical Processing of Metal Wastes of Rhenium-Containing Heat-Resistant Nickel Alloys Processing Technogenic Raw Materials-Phosphorus Slags with the Production of Precipitated Nanosilica and Simultaneous Recovery of Valuable Components Processing of Hydro-Mineral Lithium Raw Material of Kazakhstan Using Inorganic Sorbents Analysis of the Composition and Properties of the Silicon Production Wet Cleaning Sludge to Identify Sustainable Techniques for its Processing The Use of Hydrogen Peroxide and Hydrazine Sulfate for Removal of Chromium from Electroplating Effluents Methods of Mathematical Modeling of the Leaching Process of Cobalt-Containing Solutions Hydrometallurgical Processing of Spent Carbon Lining to Extract Valuable Components for Cryolite Production The Study of the Magnetic Properties of Red Mud from Alumina Production after Alkaline Treatment Thermodynamics of Copper Arsenious Raw Materials Dissolution in Nitric Acid Hydrogenation of Nitro Compounds over Catalytic Systems Containing Rare-Earth Oxides Physical Properties Variability of Zinc Powders Obtained by Electrochemical Method The Study of Physicochemical Features of Laterite Ores of the Buruktalsky Deposit The Study of Destructible Annealed Anode Paste in the Current CO2 The Study of the Melting of Waelz Oxide with an Increase in the Temperature of the Calcination Process Chapter 4: Surface Engineering and Coatings Study on the Effect of the Sealers on the Steel Surface Layer Modified by Electrical Discharge Machining Super-Hydrophobic Coating Based on Acrylic Resin A01 Investigation of the Influence of Inertia Forces on the Adhesion of the Coating to the Outer Surface of Bodies of Revolution during Thermal Spraying Determination of Properties of Wear-Resistant Coatings of Metal Forms Influence of Contact Efforts on the Surface Quality of Difficult Profile under Finishing Hardening Machining Alumo Matrix Composite Materials for Electro Spark Deposition on Carbon Steel Investigation of the Influence of Technological Regimes of High-Temperature Firing on the Structure and Properties of Silicate-Enamel Coatings for Carbon Steels Increasing of Corrosion Resistance for Metal Products of Livestock Premises Laser Treatment of Titanium in Hexane at Various Pressures and the Formation of Periodic Structures Thermal Plasma Spray to Protect Large-Size Parts of Friction Joints against Wear Discrete Oxidation of a Hard Carbide Tool Microstructure Peculiarities of Intermetallic and Composite Coatings Coatings and Lubricant to Forming Surfaces of Molds for Casting under Pressure Increasing Hardness of Surface Layer of Low-Carbon Steel by Account of Plasma Treatment of Coating Modification Features of Technological Processes of Nanogalvanizing Development and Research of Copper Covering for Intensification of Cold Stamping of Products from Stainless Steels The Influence of the Working Conditions of the Electrospark Granules Deposition on the Formation of Cracks in Ti-Al Intermetallic Coatings Kinetics of Growth of Gas-Saturated (Embrittled) Layers on Titanium during Vacuum Annealing Aspects of Applying Hard Chromium Coatings on the Inner Surfaces of Components for Hydraulic Drives with Hydrostatic Guideways Transformation of Chemical and Phase Composition in Al/FeAl3(Cr,Ni)/Fe2Al5(Cr,Ni) Laminated Coating at High Temperature Heating Effect of Current Density Distribution in the Zinc Plating Process Ensuring the Operability and Reliability of Packaging Equipment at Life Cycle Stages Formation of Diffusion Coatings Based on Nickel and Chromium in the Medium of Fusible Liquid Metal Solutions on Austenitic Steels Research of Heat Resistance and Thermophysical Properties of the Diffusion Zone Formed by Annealing by Contact Melting Mode of the Layered Metal-Intermetallic Composite of the Cu-Al System About Using Composite Materials when Restoring High-Resource Details with Application of Additive Technologies are Given Development and Testing of Polyurethane Coating for Protection of Gas Turbine Engine Blades Analysis of Galvanized Steel Sheets Fabrication in Cold Rolling Shop and Identification of Local Impacts Contributing to Corrosion of Metal-Products Mechanism of Protective Action of Inhibitors Based on Quaternary Ammonium Compounds Chapter 5: Testing and Assessment of Mechanical Properties and Wear Resistance of Structural Materials System of Chemical Bonds and Compounds as a Modern Scientific Foundation for Unification of Methods for Controlling the Structure and Properties of Various Substances and Materials Analysis of Wear-Resistant Materials of Mixer - Pneumosuperchargers Blades Operating under Conditions of Abrasive Wear Fatigue Resistance of Welded Titanium Joints Analytical Description of Neck Profile during Tensile Testing of Cylindrical Specimens About Some Reasons of Destruction of Gear Details of the Car Method for the Determining Metal Mechanical Characteristics Using FEM The Use of Fractal Formalism for the Description of Microstructures Engineering Materials Determination Coefficient of Stress Concentration Using a Conformed Display on a Circle of a Single Radius Modeling the Stress-Strain Curve of Elastic-Plastic Materials Study of RIN-Insulation Mechanical Properties for High Voltage Inputs Composite Materials with the Coating to Detect Barely Visible Impact Based on the Retroreflective Film Change of the Elastic Characteristics of a Fiber-Reinforced Laminate as a Result of Progressive Fatigue Damage Damage Assessment of Specimens Made of Layered Composite Polymeric Material Based on Carbon Plastic in Fatigue Tests Estimating the Stress-Strain State of Roll by Temperature Gradient in the Course of its Heat Treatment Chapter 6: Semiconductors and Materials for Optoelectronics Influence of DC Current on Movement of Dislocations in P-Silicon Single Crystals in Field of Internal Stresses Synthesis and Study of the Properties of Photocatalytic Compositions Based on Sro/Bi2O3 and (Bio)2CO3 Solid Solutions with Modifying Additives of Transition Metals Cu, Mn, Fe An Investigation of Photocatalytic Activity of Coatings Based on Strontium Bismuthate Deposited on a Ceramic Carrier Features of Femtosecond Micromachining of Solid Transparent Materials Influence of Three-Component Barrier Layers on Optical Properties of Photodetectors with Quantum Dots Numerical Modeling of the Anomalous Low-Temperature Dependence of the Tunneling Conductance of a "Dirty" N-I-N Junction Chapter 7: Materials and Technologies in Construction The Possibility of Using the Ultra-Thin Liquid Thermal Insulation to Insulate the Ceiling above the Basement in Residential Buildings Influence of High-Calcium Ash Composition on the Composite Binders’ Properties Geo-Composite Drainage Material for Hydro-Technical and Civil Engineering New Types of Geo-Composite Materials for Anti-Filtration Systems Technology of 3D Printing of Light Ceramics for Construction Products The Use of Overburden Clay in Ceramic Production Serpentinite Magnesium Binders, Based on Technogenic Raw Materials Method of Metallurgical Production Waste Processing Hardening Cement Conglomerates by Mining Industries Waste