Home > General > Materials Science, Mechanical Engineering and Applied Research
Materials Science, Mechanical Engineering and Applied Research

Materials Science, Mechanical Engineering and Applied Research

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

Collection of selected, peer reviewed papers from the2nd international conference on Machinery, Materials Science and Energy Engineering (ICMMSEE2014), September 20-21,2014, Changsha, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 87 papers are grouped as follows: Chapter 1: Materials Science and Technologies, Chapter 2: Applied Mechanics, Chapter 3: Mechanical Engineering, Equipment and Control, Chapter 4: Geoengineering and Applied Energy Research, Chapter 5: Industrial Engineering and Information Technology

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Materials Science and Technologies Inorganic Clay/Sodium Lignosulfonate Graft Acrylamide and Maleic Anhydride Adsorbent Composites Microstructure and Mechanical Properties of Friction Stir Welded Al-Zn-Mg-Cu Alloy Preparation of Adsorbent Composites Based on Bentonite/Sodium Lignosulfonate-g-AM Study on Ni Catalytic Hydrogenation of Carbon Dioxide for Methane Acoustic Emission Study of Corrosion Fatigue Crack Propagation Mechanism Identification Synthesis and Characterization of Melamine-Formaldehyde Resin for Foaming Use Synthesis and Characterization of 3-Difluoroaminomethyl-3-methyl Oxetane and its Homopolymer The Existence Form and Distribution of Mn in Production of Tungsten Products Coat of Epoxy Resin Filled with Nano-Al2O3 and MoS2 Erosion Wear Resistance and Application Preparation and Characterization of the Sulfonated Polymer/Non-Woven Fiber Composite Catalytic Membrane for Esterification Microstructure and Properties of Q345E Lamellar Tearing Resistant Steel SAW Welding Joints High Temperature Cylinder Sleeve Design Research Self-Lubricating Materials Catalysis Nanomaterial Research for NO High Temperature Cylinder Bioceramic Scaffolds Manufacturing by Laser 3D Printing Thermodynamic Assessment of B2O3-SiO2 Binary System Thermodynamic Assessment of SiO2-ZrO2 Binary System Through-Thickness Strain and Texture Gradients of Al-Mg-Si-Cu Alloy Sheets Produced by Snake Rolling The Effects of Nano-SiO2 on the Chemical Composition of Layers on Aluminum Alloy by Micro-Arc Oxidation Memory and Threshold Resistance Switching in Pb0.8La0.1Ca0.1Ti0.975/Zn0.99La0.01O Heterostructure Microstructure and Mechanical Properties of TiAlON/TiAlN/TiAl Films Factors Influencing Viscosity of Twin-Tail Hydrophobically Associating Polymer Weak Gel Compatibilisation of Epoxy Resin on TPEE/PA6 Blends Polyaniline Hybrid with Inverse Opal Structure for Fabrication of Thermoelectric Materials Effect of Pressure and Temperature of Solution Treatment on the Microstructure and Corrosion Resistance of AZ91D Alloy Producing High Quality CaCO3 by Phosphogypsum with New Ammonia-Base Carbonation Method Synthesis of Ionic Hydrophobic Associating Polymer and it’s Aqueous Solution‘s Viscosity Characteristics Chapter 2: Applied Mechanics The Nonlinear Random Vibration of a Clamped Rectangular Thin Plate in Magnetic Field Study of Metal Seal of Coiled Tubing Wellhead Hanging Device Research on the Fatigue Assessment Method for Steel Pressure Vessels Containing Surface Defects The Analysis Pressure Drop between Initial Station and 1#valve when Lan-Zheng-Chang Product Pipeline Shutdown On Stress Conditions Producing Crack-Free Matrix Metal-Brittle Inclusion Interface inside Heavy Forgings Soft-Sensing Model of Deformation of Welded Steel Structure Based on FLS-SVM and its Application Three-Dimensional Ballistic Equations of Rocket Considering the Elastic Effects Chapter 3: Mechanical Engineering, Equipment and Control Design and Experimental Simulation Analysis of a Kind of Prestressed Cementing Drillable Anchor Design Research of Intake Compensation Device for Improving the Dynamic Performance of Diesel Engine in Plateau Environment Location of Partial Discharge Source Model Based on Transformer Single-Winding A Designing Method of Underwater Controller Based on Trajectory-Tracking Control Law for Underwater Profile Monitoring Vehicle A New Way to Eliminate the Phenomenon of Trapping Oil in Gear Pumps The Correlation between Time and Frequency Dynamic Performance of Control System Design of Battery Fast-Swap System for Electric Vehicle Dynamic Simulation of Air Suspension with Auxiliary Chamber Research on Impacting Loads between Metro Vehicles How to Eliminate Machining Marks on the Surface of Impeller Blades by CimatronE CAM One Detection and Diagnosis System of a Certain Ordnance Equipment Based on µC/GUI Embedded Graphic User Interface Study on Prediction Deflection of at the Girder Midspan of Large Tonnage Gantry Crane Rigid Legs Motor Faults Detection Based on Vector Transformation and Amplitude Demodulation Energy Consumption and Energy Saving Research Status of Air Compressor System The Research of the Non-Circular Contour Grinding Speed Optimization and NC Programming Dynamic Analysis of Electrical Control Components under Tank Gun Firing Impact Modeling and Simulation of the Ultrasonic Motor which Using Bending Vibration Transducer Analysis of Catalytic Degradation Reaction Mechanism on Gasoline Engine Three-Way Catalysts Design and Research on Automatic Control System Based on PLC Dynamic Sensitivity Research for the Spindle of High-Speed Grinder Based on the Artificial Neural Network Design and Test Research on Voice Coil Actuator Used for Active Isolation Platform The Analysis of Field Characteristics and Measurement for Centrifugal Fan and 90° Bend Pipe Numerical Simulation Analysis of Car Overtaking on SST Turbulence Model Research on Numerical Simulation and Experiment of Plate Fin Type Intercooler in Turbocharged Natural Gas Engine The CFD Analysis of Internal Flow Field in Turbocharger Compressor The Study of Resonant Frequency of Horn and Circular Tool of Ultrasonic Milling System The Application of Oil Monitoring Technology in the Marine Hydraulic System Experimental Study of Ejectors’ Effect on the Performance of Pulse Detonation Rocket Engine Study on the Thermal Performance of VSC-HVDC Cooling Plate Using Staggered Micro-Groove Experimental Research on Phase-Change Cooling for High-Power Chip Theoretical and Computational Research of Heat Radiant Transfer in Cylinder Chapter 4: Geoengineering and Applied Energy Research Two High Activity Catalysts for the Reforming of Coke Oven Gas to H2 and CO in BCFNO Membrane Reactor Impact Energy of Gas-Solid Flows Simulation and Analysis for a Heat Recycle System on the Sidewall of Aluminum Reduction Cells Exergy Analysis of Energy Consumption for Central Air Conditioning System A Novel SPES/PES Catalytic Membrane for Production Biodiesel: Optimization by Central Composite Design Discussions on the Formation Mechanism of High-Angle Reverse Faults in Sanan Oil Field Study on 3D Fine Structural Modeling of Typical Block in Sanan Oilfield, Daqing Research on Column Flotation of Sliming Molybdenum Tailings Using Ultrasonic Pre-Treatment The Structural Characteristics and Distribution of Sand Body of the Layer 7 of YanChang Formation in Ordos Basin Fault Activity’s Controlling Effect on Source Rock an Example from Bohai Sea Area Hydrocarbon Accumulation Dominant Factors and Modes of Minghuazhen Formation in Chengdao Area Characteristics of Deep Abnormal High Pressure and its Controlling on Hydrocarbon Accumulation in Zhanhua Sag Prediction of Classification of Rock Burst Risk Based on Genetic Algorithms with SVM Reservoir Dynamic Study in BZ 13-1 Oilfield VRLA Battery SOH Estimation Based on WCPSO-LVSVM Introduction and Exploration of Qualification on Prototype Series of Nuclear Classified Heat Exchanger Tubes of RCC-M Specification Standard Requirements and Localization Development Trend for Nuclear Power Plant Key Components Material Chapter 5: Industrial Engineering and Information Technology Research on Radical Innovation Technology Forecasting Based on Technology Evolution Theory Research of Cloud Manufacturing Execution Path Optimization Based on Adaptive Ant Colony Algorithm on Hadoop Platform Research of Virtual Assembly Simulation System The Research of Point Cloud Data Processing Technology Displacement Measuring Method of Flexible Boom Based on MATLAB Video Processing Soft-Sensing Model of Flatness Error on the Surface of Machining Workpiece and its Application


Best Sellers


Product Details
  • ISBN-13: 9783038266129
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3038266124
  • Publisher Date: 22 Sep 2014
  • Binding: Digital download and online
  • No of Pages: 446


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Materials Science, Mechanical Engineering and Applied Research
Trans Tech Publications Ltd -
Materials Science, Mechanical Engineering and Applied Research
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Materials Science, Mechanical Engineering and Applied Research

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!