A unique combination of theoretical knowledge and practical analysis experience Derived from Yoshihide Hase?s Handbook of Power Systems Engineering, 2nd Edition, this book provides readers with everything they need to know about power system dynamics. Presented in three parts, it covers power system theories, computation theories, and how prevailed engineering platforms can be utilized for various engineering works. It features many illustrations based on ETAP to help explain the knowledge within as much as possible.  Recompiling all the chapters from the previous book, Power System Dynamics with Computer Based Modeling and Analysis offers nineteen new and improved content with updated information and all new topics, including two new chapters on circuit analysis which help engineers with non-electrical engineering backgrounds. Topics covered include: Essentials of Electromagnetism; Complex Number Notation (Symbolic Method) and Laplace-transform; Fault Analysis Based on Symmetrical Components; Synchronous Generators; Induction-motor; Transformer; Breaker; Arrester; Overhead-line; Power cable; Steady-State/Transient/Dynamic Stability; Control governor; AVR; Directional Distance Relay and R-X Diagram; Lightning and Switching Surge Phenomena; Insulation Coordination; Harmonics; Power Electronics Applications (Devices, PE-circuit and Control) and more.  Combines computer modeling of power systems, including analysis techniques, from an engineering consultant?s perspective Uses practical analytical software to help teach how to obtain the relevant data, formulate ?what-if? cases, and convert data analysis into meaningful information Includes mathematical details of power system analysis and power system dynamics Power System Dynamics with Computer-Based Modeling and Analysis will appeal to all power system engineers as well as engineering and electrical engineering students.

Table of Contents:
About the Authors xxix Preface xxxi Acknowledgments xxxiii Part A Power Systems Theories and Practices 1 1 Essentials of Electromagnetism 3 1.1 Overview 3 1.2 Voltage, Current, Electric Power, and Resistance 3 1.3 Electromagnetic Induction (Faraday’s Law) 4 1.4 Self Inductance and Mutual Inductance 6 1.5 Mutual Capacitance 7 2 Complex Number Notation (Symbolic Method) and the Laplace Transform 11 2.1 Euler’s Formula 11 2.2 Complex Number Notation of Electricity Based on Euler’s Formula 12 2.3 LR Circuit Transient Calculation Using Complex Number Notation and the Laplace Transform 14 2.4 LCR Circuit Transient Calculation 16 2.5 Resistive, Inductive, and Capacitive Load, and Phasor Expressions 21 3 Transmission Line Matrices and Symmetrical Components 25 3.1 Overhead Transmission Lines with Inductive LR Constants 25 3.2 Overhead Transmission Lines with Capacitive C Constants 30 3.3 Symmetrical Coordinate Method (Symmetrical Components) 32 3.4 Conversion of a Three-Phase Circuit into a Symmetrical Coordinated Circuit 39 3.5 Transmission Lines by Symmetrical Components 39 3.6 Generator by Symmetrical Components (Simplified Description) 47 3.7 Description of a Three-Phase Load Circuit by Symmetrical Components 49 4 Physics of Transmission Lines and Line Constants 51 4.1 Inductance 51 4.2 Capacitance and Leakage Current 59 4.3 Actual Configuration of Overhead Transmission Lines 66 4.4 Special Properties of Working Inductance and Working Capacitance 68 4.5 MKS Rational Unit System 71 5 The Per-Unit Method 77 5.1 Fundamental Concepts of the PU Method 77 5.2 PU Method for a Single-Phase Circuit 77 5.3 PU Method for Three-Phase Circuits 79 5.4 Base Quantity Modification of Unitized Impedance 80 5.5 Unitized Symmetrical Circuit: Numerical Example 81 6 Transformer Modeling 91 6.1 Single-Phase Three-Winding Transformer 91 6.2 - - ?-Connected Three-Phase, Three-Winding Transformer 95 6.3 Three-Phase Transformers with Various Winding Connections 101 6.4 Autotransformers 105 6.5 On-Load Tap-Changing Transformer (LTC Transformer) 107 6.6 Phase-Shifting Transformer 109 6.7 Woodbridge Transformers and Scott Transformers 113 6.8 Neutral Grounding Transformer 116 6.9 Transformer Magnetic Characteristics and Inrush Current Phenomena 118 7 Fault Analysis Based on Symmetrical Components 127 7.1 Fundamental Concepts of Fault Analysis Based on the Symmetrical Coordinate Method 127 7.2 Line-to-Ground Fault (Phase-a to Ground Fault: 1?G) 127 7.3 Fault Analysis at Various Fault Modes 132 7.4 Conductor Opening 137 7.5 Visual Vector Diagrams of Voltages and Currents under Fault Conditions 139 7.6 Three-Phase-Order Misconnections 151 8 Fault Analysis with the aß0-Method 155 8.1 aß0-Method (Clarke-Components) 155 8.2 Fault Analysis with aß0-Components 166 8.3 Advantages of the aß0-Method 171 8.4 Fault-Transient Analysis with Symmetrical Components and the aß0-Method 171 9 Power Cables 175 9.1 Structural Features of Power Cables 175 9.2 Circuit Constants of Power Cables 183 9.3 Metallic Sheaths and Outer Coverings 190 10 Synchronous Generators, Part 1: Circuit Theory 195 10.1 Generator Model in a Phase abc-Domain 195 10.2 dq0 Method (dq0 Components) 203 10.3 Transformation of Generator Equations from the abc-Domain to the dq0-Domain 206 10.4 Physical Meanings of Generator Equations in the dq0-Domain 210 10.5 Generator dq0-Domain Equations 213 10.6 Generator dq0-Domain Equivalent Circuit 218 10.7 Generator Operating Characteristics and Vector Diagram on the d- and q-Axes Plane 220 10.8 Generator Transient Reactance 223 10.9 Symmetrical Equivalent Circuits of Generators 225 10.10 Laplace-Transformed Generator Equations and Time Constants 231 10.12 Relations Between the dq0-Domain and aß0-Domain 239 10.13 Calculating Generator Short-Circuit Transient Current Under Load 239 11 Synchronous Generators, Part 2: Characteristics of Machinery 251 11.1 Apparent Power P + jQ in the abc-, 012-, dq0-Domains 251 11.2 Mechanical (Kinetic) Power and Generating (Electrical) Power 257 11.3 Kinetic Equation for Generators 259 11.4 Generator Operating Characteristics with P-Q (or p-q) Coordinates 269 11.5 Generator Ratings and Capability Curves 271 11.6 Generator’s Locus in the pq-Coordinate Plane under Various Operating Conditions 275 11.7 Leading Power-Factor (Under-Excitation Domain) Operation, and UEL Function by AVR 277 11.8 Operation at Over-Excitation (Lagging Power-Factor Operation) 282 11.9 Thermal Generators’ Weak Points (Negative-Sequence Current, Higher Harmonic Current, Shaft-Torsional Distortion) 282 11.10 Transient Torsional Twisting Torque of a TG Coupled Shaft 287 11.11 General Description of Modern Thermal/Nuclear TG Units 290 12 Steady-State, Transient, and Dynamic Stability 297 12.1 P-d Curves and Q-d Curves 297 12.2 Power Transfer Limits of Grid-Connected Generators (Steady-State Stability) 299 12.3 Transient Stability 306 12.4 Dynamic Stability 309 12.5 Four-Terminal Circuit and the P - d Curve under Fault Conditions 310 12.6 P-d Curve under Various Fault-Mode Conditions 312 12.7 PQV Characteristics and Voltage Instability (Voltage Avalanche) 313 12.8 Generator Characteristics with an AVR 319 12.9 Generator Operation Limit With and Without an AVR in PQ Coordinates 330 12.10 VQ (Voltage and Reactive Power) Control with an AVR 332 13 Induction Generators and Motors (Induction Machines) 337 13.1 Introduction to Induction Motors and Generators 337 13.2 Doubly Fed Induction Generators and Motors 337 13.3 Squirrel-Cage Induction Motors 355 13.4 Proportional Relations of Mechanical Quantities and Electrical Quantities as a Basis of Power-Electronic Control 367 14 Directional Distance Relays and R–X Diagrams 371 14.1 Overview of Protective Relays 371 14.2 Directional Distance Relays (DZ-Ry) and R–X Coordinate Plane 372 14.3 R–X Diagram Locus under Fault Conditions 375 14.4 Impedance Locus under Ordinary Load Conditions and Step-Out Conditions 381 14.5 Impedance Locus Under Faults with Load-Flow Conditions 385 14.6 Loss of Excitation Detection by Distance Relays (40-Relay) 386 15 Lightning and Switching Surge Phenomena and Breaker Switching 391 15.1 Traveling Wave on a Transmission Line, and Equations 391 15.2 Four-Terminal Network Equations between Two Arbitrary Points 398 15.3 Examination of Line Constants 399 15.4 Behavior of Traveling Waves at Transition Points 401 15.5 Surge Overvoltages and Their Three Different, Confusing Notations 404 15.6 Behavior of Traveling Waves at a Lightning-Strike Point 406 15.7 Traveling Wave Phenomena of Three-Phase Transmission Lines 408 15.8 Reflection Lattices and Transient Behavior Modes 413 15.9 Switching Surge Phenomena Caused by Breakers Tripping 415 15.10 Breaker Phase Voltages and Recovery Voltages after Fault Tripping 424 15.11 Three-Phase Breaker TRVs across Independent Poles 426 15.12 Circuit Breakers and Switching Practices 432 15.13 Switching Surge Caused by Line Switches (Disconnecting Switches) 452 15.14 Surge Phenomena Caused on Power Cable Systems 454 15.15 Lightning Surge Caused on Cable Lines 456 15.16 Switching Surge Caused on Cable Lines 458 15.17 Surge Voltages Caused on Cables and GIS Jointed Points 459 16 Overvoltage Phenomena 463 16.1 Neutral-Grounding Methods 463 16.2 Arc-Suppression Coil (Petersen Coil) Neutral-Grounded Method 467 16.3 Overvoltages Caused by a Line-to-Ground Fault 467 16.4 Other Low-Frequency Overvoltage Phenomena (Non-resonant Phenomena) 469 16.5 Lower-Frequency Resonant Overvoltages 472 16.6 Interrupted Ground Fault of a Cable Line in a Neutral-Ungrounded System 475 16.7 Switching Surge Overvoltages 475 16.8 Overvoltage Phenomena Caused by Lightning Strikes 477 17 Insulation Coordination 481 17.1 Overvoltages as Insulation Stresses 481 17.2 Classification of Overvoltages 483 17.3 Fundamental Process of Insulation Coordination 486 17.4 Countermeasures on Transmission Lines to Reduce Overvoltages and Flashover 487 17.5 Tower-Mounted Arrester Devices 489 17.6 Using Unequal Circuit Insulation (Double-Circuit Lines) 490 17.7 Using High-Speed Reclosing 490 17.8 Overvoltage Protection with Arresters at Substations 491 17.9 Station Protection Using OGWs and Reduced Grounding Resistance 499 17.10 Insulation Coordination Details 501 17.11 Transfer Surge Voltages through Transformers, and Generator Protection 509 17.12 Transformer Internal High-Frequency Voltage Oscillation Phenomena 518 17.13 Oil-Filled Transformers Versus Gas-Filled Transformers 524 18 Harmonics and Waveform Distortion Phenomena 527 18.1 Classification of Harmonics and Waveform Distortion 527 18.2 Impact of Harmonics 527 18.3 Harmonic Phenomena Caused by Power Cable Line Faults 529 19 Power Electronic Applications, Part 1: Devices 535 19.1 Fundamental Concepts of Power Electronics 535 19.2 Power Switching with Power Devices 535 19.3 Snubber Circuit 539 19.4 Voltage Conversion with Switching 540 19.5 Power Electronics Devices 542 19.6 Mathematical Background for Analyzing Power Electronics Applications 547 20 Power Electronics Applications, Part 2: Circuit Theory 553 20.1 AC-to-DC Conversion: A Rectifier with a Diode 553 20.2 AC-to-DC Controlled Conversion: Rectifier with a Thyristor 562 20.3 DC-to-DC Converters (DC-to-DC Choppers) 571 20.4 DC-to-AC Inverters 579 20.5 PWM Control of Inverters 583 20.6 AC-to-AC Converters (Cycloconverters) 587 21 Power Electronics Applications, Part 3: Control Theory 589 21.1 Introduction 589 21.2 Driving Motors 589 21.3 Static Var Compensators (SVC: A Thyristor-Based Approach) 597 21.4 Active Filters 603 21.5 Generator Excitation Systems 609 21.6 Adjustable-Speed Pumped-Storage Generator-Motor Units 610 21.7 Wind Generation 615 21.8 Small Hydro Generation 618 21.9 Solar Generation (Photovoltaic Generation) 619 21.10 High-Voltage DC Transmission (HVDC Transmission) 621 21.11 FACTS Technology 625 21.12 Railway Applications 627 21.13 Uninterruptible Power Supplies 628 Appendix A Mathematical Formulae 631 Appendix B Matrix Equation Formulae 635 Part B Digital Computation Theories 639 22 Digital Computation Basics 641 22.1 Introduction 641 22.2 Network Types 642 22.3 Circuit Elements 645 22.4 Ohm’s Law 653 22.5 Kirchhoff’s Circuit Laws 655 22.6 Electrical Division Principle 656 22.7 Instantaneous, Average, and RMS Values 657 22.8 Nodal Formulation 658 22.9 Procedure for Mesh Analysis 662 22.10 Norton’s and Thévenin’s Equivalents 664 22.11 Maximum Power Transfer Theorem 668 22.13 Network Topology 675 22.14 Power System Matrices 681 22.15 Transformer Modeling 692 22.16 Transmission Line Modeling 696 23 Power-Flow Methods 701 23.1 Newton–Raphson Method 701 23.2 Gauss–Seidel Method 702 23.3 Adaptive Newton–Raphson Method 703 23.4 Fast-Decoupled Method 703 24 Short-Circuit Methods 705 24.1 ANSI/IEEE Calculation Methods 705 24.2 IEC Calculation Methods 719 25 Harmonics 729 25.1 Problem Formulation 729 25.2 Methodology and Standards 733 25.3 Harmonic Indices 735 25.4 Harmonic Component Modeling 740 25.5 Power System Components 741 25.6 System Resonance 743 25.7 Harmonic Mitigation 744 26 Reliability 749 26.1 Methodology and Standards 749 26.2 Performance Indices 752 27 Numerical Integration Methods 755 27.1 Accuracy 755 27.2 Stability 755 27.3 Stiffness 757 27.4 Predictor–Corrector 757 27.5 Runge–Kutta 758 28 Optimization 761 28.1 Power-Flow Injections 761 28.2 Voltage Magnitude Constraints 762 28.3 Line-Flow Thermal Constraints 762 28.4 Line-Flow Constraints as Current Limitations 763 28.5 Line-Flow Constraints as Voltage Angle Constraints 763 Part C Analytical Practices and Examples using ETAP 765 29 Introduction to Power System Analysis 767 29.1 Planning Studies 767 29.2 Need for Power-System Analysis 768 29.3 Computers in Power Engineering 768 29.4 Study Approach 768 29.5 Operator Training 772 29.6 System Reliability and Maintenance 772 29.7 Electrical Transient Analyzer Program (ETAP) 772 30 One-Line Diagrams 777 30.1 Introduction 777 30.2 Engineering Parameters 777 30.3 One-Line Diagram Symbols 778 30.4 Power-System Configurations 780 30.5 Network Topology Processing 787 30.6 Illustrative Example – Per-Unit and Single-Line Diagram 790 31 Load Flow 791 31.1 Introduction 791 31.2 Study Objectives 791 31.3 Problem Formulation 792 31.4 Calculation Methodology 794 31.5 Required Data for ETAP 796 31.6 Data Collection and Preparation 797 31.7 Model Validation 797 31.8 Study Scenarios 799 31.9 Contingency Analysis 800 31.10 Optimal or Optimum Power Flow 801 31.11 Illustrative Examples 803 32 Short-Circuit/Fault Analysis 841 32.1 Introduction 841 32.2 Analysis Objectives 841 32.3 Methodology and Standards 846 32.4 Study Scenarios 855 32.5 Results and Reports 856 32.6 Illustrative Examples 858 33 Motor Starting 881 33.1 Methods 881 33.2 Analysis Objectives 893 33.3 Methodology and Standards 894 33.4 Required Data 902 33.5 Illustrative Examples 903 33.6 Motor-Starting Plots and Results 913 33.7 Motor-Starting Alerts 916 34 Harmonics 917 34.1 Introduction 917 34.2 Analysis Objectives 919 34.3 Required Data 921 34.4 Harmonic Load Flow and Frequency Scan 923 34.5 Illustrative Examples 924 35 Transient Stability 939 35.1 Introduction 939 35.2 Analysis Objectives 940 35.3 Basic Concepts of Transient Stability 942 35.4 Dynamic Models 944 35.5 User-Defined Models 967 35.6 Parameter Tuning 967 35.7 Single-Generator Power System Model 971 35.8 Data Collection and Preparation 973 35.9 Study Scenarios 974 35.10 Stability Improvement 977 35.11 System Simulation 977 35.12 Illustrative Examples 979 36 Reliability Assessment 1003 36.1 Introduction 1003 36.2 Analysis Objectives 1003 36.3 Problem Formulation 1004 36.4 Required Data 1005 36.5 Illustrative Examples 1005 37 Protective Device Coordination 1019 37.1 Introduction 1019 37.2 Relays 1022 37.3 Methodology 1028 37.4 Required Data 1035 37.5 Principle of Protection 1036 37.6 Principle of Selectivity/Coordination 1037 37.7 Art of Protection and Coordination >600 V 1040 37.8 Illustrative Examples 1048 Appendix C Standards, Regulations, and Best Practice 1071 Further Reading 1083 Index 1085