Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Progress of Machining Technology: (Volumes 407-408 Key Engineering Materials)
Progress of Machining Technology: (Volumes 407-408 Key Engineering Materials)

Progress of Machining Technology: (Volumes 407-408 Key Engineering Materials)

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). This special volume focuses on the current progress and trends in machining technologies. The objective was to harness and exchange experience, knowledge, new ideas and information concerning the latest developments in research pertaining to a wide range of subjects such as machining of novel, difficult-to-cut and free-machining materials, new tool materials and new abrasive tools, precision, micro and nano-machining, abrasive machining, high-speed machining, unconventional machining, new machine tools and tooling technology, and monitoring of the machining process.

Table of Contents:
Committees Preface Keynote Papers Study on Bioforming Technology of Bionic Micro-Nano Structures The Development Trend of Cutting Tools I. New Tool Materials and New Abrasive Tools Bending Fatigue Characteristics of WC-βt-Co Alloys Stress in Diamond Coatings on Cutting Tools Deposited by Hollow Substrate Holder Tool Life Improvement of Coated Carbide Tools Treated by Novel Nitriding Technique A New Method for Profiling Gear Plunge Shaving Cutter on Gear Shaving Machine Influence of Tapping Conditions and Tool Geometries on Tool Life in Tapping of Inconel 625® An Experimental Study on Suppression of Chatter Vibration with Different Helix Angles End-Mill Research on Fabricating CVD Diamond Microstructures Using RIE Process Study on Micro Drilling — Rotating Bending Fatigue of Micro Carbide Drills Study on Precision Polishing Using Gelatin Stone Machining of Difficult-to-Cut Materials with a Lubricant Coated Tool II. New Machine Tools and Tooling Technology Practical Measurement and Evaluation of Thermal Behavior of NC Lathe and its Application to Turning Process Modification Analysis on the Instantaneous Stiffness of the 3-RPS Parallel Machine Research on Machining Methods for Non-Circular Isometric Profile The Error Analysis on Tooth Profiles with Electroplated CBN Hard Gear-Honing-Tools Experimental Research on Wear Resistance of Deep Cryogenic Treated HSS Twist Drill Novel Positioning Devices for Ultraprecision Machine Tool Research on the Method of Improving Accuracy of Parallel Machine Tools Study on the Accuracy of 3-RPS Parallel Machine Tools A Novel Determination Algorithm of Locating Parameters for Fixture Design The Technical Study on Cylinder Cam Machining Development of Novel XY Micropositioning Stage Optimization of Distribution Model for CNC Lathes Early Failures Grey System Theory Modeling for Nonlinear, Dynamic Machine Tool Thermal Error Research on Intelligent Controller for EDM Online Parameters Laser-Assisted Truing for Metal-Bonded Diamond Wheel Research on Mechanics and Control Methods of a New Loading Structure Based on Stewart Platform Principle and Experiment of PRS-XY Hybrid NC Machine Tool Dynamic Characteristic Analysis and Validation of Spindle Assembly of High Speed Machine Tool Study on Machine Accuracy of the Serial-Parallel Machine Tool Based on the BP Neural Network Kinematics Simulation of a Tripod Parallel Universal Wrist Dimensional Designing Study on a Novel 3-RPS Parallel Machine Basic Study on the Development of the General Purpose Vertical Milling Machine for Educational Skill Training Novel Precision PZT-Driven Micropositioning Stage with Large Travel Range The Study of Constant Grinding Removal Rate Model of Turning-Grinding Composite Machine Tool III. Digital Design and Manufacturing Research on the Integrated Design of Dual Mass Flywheel CAD/CAE/CAM Study of Virtual Numerical Control Milling Simulation System Construction of Lander Multidisciplinary Optimization Platform A Study on a Tool to Support Configuration Design of 5-Axis Machine Tools Agile Manufacturing Data Management Intelligent MES Based on RFID Toolpath Optimization on Automatic Removal Uncut and Application Flank Milling for Blisk with a Barrel Ball Milling Cutter Equipment Integration-Based Workshop e-Manufacturing Execution Mode and Supporting Technologies E-Enterprise Framework and Operation Mode for Manufacturing Enterprises Automatic Process Learning to Restore Omitted 2D Drawings A Tool-Path Interpolation Algorithm Based on Unfolding-Bending Parametric Curves A Collaborative Design and Analysis Environment for Flexible Fixture Collaborative Manufacturing Unit Selection Using a Sorting Adaptive Genetic Algorithm in Networked Environment Part Recognition Based on Maximum Mutual Information Application of Virtual Manufacturing to Impeller Five-Axis High Speed Machining Template-Based Process Planning System for Special Bearing Development of Advanced NC Geometric Cutting Simulator Development of Novel NC Machining System for Non-Circular Shafts Study on Three-Level Matching Model of Product Configuration Oriented to Mass Customization Five-Axis Machining Tool Vector Control of Impeller A Petri Net and Genetic Algorithm Based Method for Flexible Manufacturing Cells Modeling and Scheduling A Strategy of Toolpath Generation for Finish Machining of Mold Cavity Based on Tool-Zmap Model Research on NC Manufacturing Technique of Double Conical Screw Simulation-Based Manufacturing Interoperability Standards and Testing Research about Web Services Based Integration of Manufacturing Process Information Five-Axis Flank Milling of Sculptured Surface with Barrel Cutters Integrated Process Planning Based on 3D Product Models IV. Cutting/Grinding Fluids Dynamic Stress and Deformation of Non-Homogeneous Poroelastic Shells of Revolution Saturated in Viscous Fluid Study on Green Design and Biodegradability of B-Containing Water-Based Cutting Fluid Study on Metabolic System for Water-Soluble Coolant — Machining Performance and Long-Term Stability of Recycled Coolant Influence of Antirusting Aggent on the Cobalt Leaching of the Cemented Carbide Tool The Assist Effect of Nitrogen Atmosphere on MQL Cutting Performance Experimental Research on Cutting Heat Dissipation under Various Cooling Conditions Importance of MQL Media Composition in Near-Dry Machining of Aluminum V. Precision, Micro and Nano-Machining A Micromilling Experimental Study on AISI 4340 Steel Surface Modification of Stainless Steel for Surgical Tool by EB-Polishing High-Efficient Damage-Free Correction of the Thickness Distribution of Quartz Crystal Wafer Using Open-Air Type Plasma CVM Deformation in Mono-Crystalline Silicon Caused by High Speed Single-Point Micro-Cutting Study on Cutting of Micro Channel by End Mill with Small Diameter Study on Ultra Precision Polishing of Single Crystal Diamond Substrates under Ultraviolet Irradiation Ultra-Precision Machining of Dies for Microlens Arrays Using a Diamond Cutting Tool Micro Machining of Three-Dimensional Microstructure with the Tiny-Grinding Wheel Based on the Electro-Magneto-Rheological Effect Effect of Potential Function on Molecular Dynamics Simulation of Copper Processing Improvement of Thickness Uniformity of Bulk Silicon Wafer by Numerically Controlled Local Wet Etching Figuring of Elliptical Neutron Focusing Mirror Using Numerically Controlled Local Wet Etching Ultra Precision Diamond Shaping of an Elliptical Micro-Lens Array Mirror Finishing of Austenitic Stainless Steel with a Cermet Insert Study on Precision Finishing of PCD by Constant-Pressure Grinding and UV-Polishing VI. Cutting Mechanisms, Analysis and Simulation The Investigation of Tool Wear in Metal Machining Using Finite Element Method An Analytical Evaluation of Drilling Temperature Prediction and Avoidance of Chatter in Milling of Thin-Walled Structure Off-Line Feedrate Optimization Based on Simulation of Cutting Forces Quantitative Study of Shear Localization in Chip Formation while Machining Ti-6Al-4V Cutting Mechanism of Sulfrized Free-Machining Steel Thermal-Mechanical Effect on Temperature/Stress Distribution when Orthogonal Cutting Bearing Steel In-Process Recognition of Chip Forms Using Dynamic Cutting Force Components in Hard Turning Influence of WC and Co in Cutting Cemented Carbides with PCD and CBN Tools Dynamic Simulation and Analysis of Centrifugal Barrel Surface Finishing Based on 3D Discrete Element Method Modelling the Polishing Efficiency of Polycrystalline Diamond Composites by the Dynamic Friction Method Effect of Cutting Edge Roundness on Work Hardened Surface Layer in Metal Cutting Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model Cutting Parameters Optimization of Thin-Walled Workpiece Based on Deflection Control Development of Multiscale Simulation System for Nano-Processes Study on Machining Error in Ball End Milling of Spherical Surface Material Removal Model of Sapphire Substrate in Double-Side Lapping Process Experimental and Numerical Study of Cutting Forces and Temperature Fields when Dry Turning Aluminum Alloy The Relationship between Dynamic Components of Cutting Force and Adhesion of Tool-Chip Interface Study on the Chip-Breaking Behavior under the Concept of Equivalent Parameters for Complicated Groove Insert in 45 Cutting Steel MCA Model for Chip Breaking and Curling of Orthogonal Cutting Simulation and Analysis for Application of Truing Ring in Certain Eccentricity Plane Lapping System A New Approach for Friction Modeling at the Tool-Chip Interface in Orthogonal Cutting Calculation of Material Flow in Orthogonal Cutting by Using Streamline Model Application of a Drill Resistance Technique for Rapid Determining Wood Density Generation of Wear Protective Layer in High Speed Turning of Gray Cast Iron Containing Aluminium and Magnesium Mechanism of Material Softening in Primary Shear Zone during Serrated Chip Formation in High Speed Machining of High Strength Steel A Feedrate Scheduling Strategy Based on a General Force Model Statistical Research on the Effects of Cutting Edge Preparation on Face Milling of Austenitic Stainless Steel Using FEM Determining Modulus of Elasticity of Structural Lumber with Vibration Methods Research on Warpage Deformation of Machining Cantilever Sheet Part with Combined Saw Milling Tool Determination of the Flow Stress of Ti6Al4V Based on Cutting Experiment and Optimization Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel VII. Abrasive Machining Study on Deep Hole Honing Based on Squeeze Film Technology Study on the Abrasive Effecting Factors of the Removal Rate during Dual-Lapping Sapphire Wafer Experimental Investigations into Roughness Finished by Abrasive Jet with Grinding Wheel as Restraint An Investigation into Integrate the Surface Hardening with the Grinding Precision Finishing Study of Magnetic Abrasive Finishing to Thin Sleeve of Al Alloy Research of the Dynamic Abrasive Particles Field Mechanical Grinding: An Effective Method to Control the Conductivity of p-Toluene Sulfonic Acid Doped Polypyrrole Study on Edge Contact Area and Surface Integrity of Workpiece in Point Grinding Process An Experimental Study on Composites Machining Using Abrasive Water Jet Technology VIII. High Speed Machining Dynamic Simulation and Cutting Conditions Optimization of Tee Slot Milling Based on CutPro Software Predictive Tool Life Model of CBN in Ti6Al4V High Speed Turning and Cutting Parameter Optimization Finite Element Analysis on Segmented Chip Formation for High Speed Cutting of Ti6Al4V Alloy Effect of Co Content and WC Grain Size on Wear Resistance of Micro Carbide Endmills in High Speed Milling of Graphite Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters Application of Minimum Quantity Lubrication when Drilling Nickel-Based Superalloy at High Cutting Speed IX. Unconventional Machining Design of Angle Adjustable Electrochemical Micro-Machining System Investigation of Surface Treatment Method by High-Speed Scanning of Single-Mode Fiber Laser with MOPA Effect of Ultrasonic Vibration of Tool on Electrical Discharge Machining of Sintered NdFeB Magnet The Micro-Mechanism of Vibration Cutting Stress Wave and the Analysis of Macro-Processing Effect Study on Electrical Discharge Machining Characteristics of Electrically Conductive Ceramics The “Effective Region” Characteristic of the Tool Life in Vibration Drilling Effect of Thickening Agent on Water-Based Working Fluid for EDM Experimental Research on Pulse Generator for EDM of Non-Conductive Ceramics Study on Cavitation Aided Abrasive Machining on Glass Simulation Research on the Swirling Airflow Compounded with Magnetic-Field Finishing A Denoise Method of Electrical Discharge Machining Gaps Signal for Non-Conductive Engineering Ceramics Based on Wavelet MMA Effect of Electrode Insulation Thickness on Size Accuracy of Bored Hole in ECD Process Prevention of Burr Formation in Face Milling of Carbon Steel by Laser Hardening The Optimization of Processing Parameters and Experimental Investigation on Ni-Based Components Fabricated by Laser Cladding Design of a Simultaneous Module Using Burnishing and Electrofinishing on Hole-Wall Surface The Analysis on the Stability of Diamond Wire Saw Cutting Process for the Silicon Influence of On-the-Machine Laser Hardening on Machinability of Carbon Steel in Turning Ultrafine-Grained Treatment Process on FGH4096 Alloy Study on Bio-Limited Forming Technology Based on the Nano-Composite Electroless Coating X. Surface Integrity and Machining Quality Effect of Surface Topography on Stress Distribution of Vacuum Plate Glass for Different Aluminum Alloy Braced Pillars Cutting Characteristics of CFRP Materials with End Milling Experimental Characteristics of Aluminum Alloys in Dry End Milling Numerical Analysis of Surface Residual Stress of NC Milling 7075-T7451 Aluminum Alloy Gloss Evaluation Method for Metal Surface with Hairline Using Patterned Area Illumination Experimental Study on the Cutting Temperature Using Work-Tool Thermocouple while Machining TC4 Study on the Surface Integrity of Micro-Ultrasonic Machined Glass-Ceramic Material


Best Sellers


Product Details
  • ISBN-13: 9783038132691
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 407-408 Key Engineering Materials
  • ISBN-10: 3038132691
  • Publisher Date: 20 Feb 2009
  • Binding: Digital download and online
  • No of Pages: 762


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Progress of Machining Technology: (Volumes 407-408 Key Engineering Materials)
Trans Tech Publications Ltd -
Progress of Machining Technology: (Volumes 407-408 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Progress of Machining Technology: (Volumes 407-408 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!
    ASK VIDYA