Home > General > Recent Development in Machining, Materials and Mechanical Technologies
Recent Development in Machining, Materials and Mechanical Technologies

Recent Development in Machining, Materials and Mechanical Technologies

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

Collection of selected, peer reviewed papers from the 2014 International Conference on Machining, Materials and Mechanical Technologies (IC3MT), August 31- September 5, 2014, Taipei City, Taiwan. The 132 papers are grouped as follows: Chapter 1: Materials Research and its Applications; Chapter 2: Material Processing Technologies; Chapter 3: Applied Research in Materials Science; Chapter 4: Applied Mechanics and Mechanical Technologies; Chapter 5: Measurements and Monitoring

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Materials Research and its Applications A Dye Sensitized Solar Cell with ZnO-Coated TiO2 Electrode and Carbon Nanotubes Electrode for High Power Conversion Efficiency Influences of MOS Device Characteristic under Different Oxygen-Dose Participations in the Silicon Substrate The Estimation of the Mechanical Property of the Porous Material by Numerical Analysis Acidic Treatment of CaO-Based Materials for Medium-High Temperature CO2 Capture Characterization of Novel Sorbents for Mercury Removal at Elevated Temperature Development of Recovery System for Extracting Silicon Carbide from Photovoltaic Industry Abrasive Slurry Effect of Added Cr3C2 on the Microstructure and Mechanical Properties of WC–SiC Ceramics Effect of Al Addition in Cast Nickel Base Superalloys, Inconel-738 on Microstructures and Oxidation Behaviors at 900°C and 1000°C Effect of Sintering Condition on the Microstructure and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3 - Bi0.5(Na0.95K0.05)0.5TiO3 Ceramics Electroless Ni-P/Diamond/Graphene Composite Coatings and Characterization of their Wear and Corrosion Resistance in Sodium Chloride Solution ESD-Reliability Analysis and Strategy of the GaN-Based Light-Emitting Diodes Evaluation of Surface Properties and In Vitro Characterization of Surface Modified In Situ TiO2 Nanofibers Preparation and Characterization of Protective LSM Coatings Produced by Atmospheric Plasma Spraying Preparation of Electroless Nickel-Phosphorous-TiO2 Composite Coating for Improvement of Wear and Stress Corrosion Cracking Resistance of AA7075 in 3.5% NaCl Preparation of Nanocrystalline Cubic Boron Nitride Coating by Magnetron Sputtering Method Production Processes and Characteristics of Porous Alumina with Air Bubbles Introduced into Slurry The Dependence of ECR-CVD Processing Parameters on Deposition Uniformity of Hydrogenated Amorphous Silicon (a-Si:H) Films Thermodynamic Possibilities and Limits for Producer Gas Desulfurization and HCL Related Interferences for Zn, Mn, Ce and La Based Sorbents of Sulfur Compounds Thin-Film Growth Rate Monitor by Normal-Incidence Reflectance Efficiency Analysis of Gas Turbine Combined-Cycle Fed with Synthetic Natural Gas (SNG) and Mixture of Syngas and SNG Optimization of Operating Conditions for an SOFC Stack Oscillation Phenomenon of the Cell Performance for an Anode-Supported Solid Oxide Fuel Cell with a Low-Porosity/High-Thickness Anode Structure Rate Effects on Dynamic Properties of Liquid under Nanoconfinement The Thermal Image Analysis and Fuel Conversion Characteristics on Porous Media-Catalyst Hybrid Reactor in Dry Auto-Thermal Reforming Viscosity Effects of Spray Characteristics in Air-Blast Atomizer Chapter 2: Material Processing Technologies A Numerical Simulation Study on Machining Performance for Front Face Circular Grooving Using Special Structure Milling Cutters — Part 1: Simulation Method and Examination of Machining Capacity A Numerical Simulation Study on Machining Performance for Front Face Circular Grooving Using Special Structure Milling Cutters — Part 2: Simulation Results and Discussions for Machining a Groove with Rectangular Sectional Profile A Study on Tool Damage of Threading Tap in Screw Cutting of Stainless Steel 15-5PH Air Jet Assisted End Milling of Titanium Alloy Ti-6Al-4V ELI at High Cutting Speed Assessment of Geometrical Deviations of Machined Part by Using Coordinate Measuring Machines Basic Study on Thermo Chemical Turning Method for Metal Bonded Diamond Wheels Characterization of Machining Damages Generated by a Piercing Process in CFRP Laminates Damage of PVD-Coated Cutting Tools Due to Interrupted Cutting of Ni-Based Superalloys A Novel Cutting Concept of CFRP Composites for Extending the Life of Tool Development of the Local Polishing Technique for Single-Crystal SiC Wafer Effect of Cutting Conditions on Tool Wear in Driven Rotary Cutting of Maraging Steel Effect of Cutting Force Control on Cutting Characteristics of CFRP in Diamond Saw Cutting Effect of Dry Ice Blasting on Removal of Loading Carbon Chips on Wheel Surface Effect of High-Pressure Coolant Supply on Chip-Breaking and Tool Wear in Machining of Stainless Steel Effect of Work Material’s Hardness on Cutting Performance of TiAlN- and CrAlN-Coated Cutting Tools Effects of Cooling Conditions on Thermal Crack Initiation of Brittle Cutting Tools during Intermittent Cutting Effects of Cutting Fluid Application in the Performance of the Nimomic 80A Turning Effects of Guide Groove Shape on Chip Controllability for Chip-Guiding Turning Effects of Supplying Oil Mist and Water Mist with Cold Air on Cutting Force and Temperature in End Milling of Difficult-to-Cut Materials Estimating the Cutting Characteristics of Spiral Tap - Tool Edge Temperature and Fluctuation of Cutting Forces Evaluation of Grinding Performance by Mechanical Properties of Super Abrasive Wheel - Evaluation of Grade by Grinding Force Evaluation of Machining Forces in Asymmetrical Face Milling of Cast Iron DIN GGG50 High Precision Turning of Hardened Steel by Use of PcBN Insert Sharpened with Short Pulse Laser High-Efficient Regeneration of Grinding Performance Using Adhesive Films in Dry Grinding of Carbon Improving the Polishing Effect of Stainless Tube by Magnetic Finishing with Gel Abrasive Influence of the Cutting Fluid on Tool Edge Temperature in End Milling of Titanium Alloy Influence of Tool Wear on Cutting Characteristics in Ultra-Precision Cutting Investigation of Machinability in Milling of Difficult-to-Cut Materials Using Water Soluble and Water Insoluble Cutting Oil L-Shaped Machining of Anisotropic Woods with a Fine Wire Cutting Tool Machinability Evaluation of Inclined Planetary Motion Milling System for Difficult-to-Cut Materials Machine Learning of Cutting Conditions in Drilling Using Artificial Neural Network Machining Feasibility of a New Developed Medium in Electrical Discharge Machining Near-Dry Machining of Titanium Alloy with MQL and Hybrid Mist Supply Shear Cutting Behaviors in Thermosetting and Thermoplatic CFRP Laminates Simulation Analysis and In-Process Measurement of the Workpiece Temperature Distribution in Large Surface Grinding Size Effect in Machining on Initial Tool Wear in Heat-Resistant Alloy Cutting Stability of Adhered Material to the Cutting Edge of a Cermet Insert in Turning of an Austenitic Stainless Steel Study on Applicability of Large-Area EB Irradiation to Micro-Deburring Study on Surface Characteristics of EDMed Surface with Nickel Powder Mixed Fluid Study on Ultrasonic Cavitation-Assisted Micro-Endmill Milling The Effect of Eccentricity of the Tool on the Surface Morphology of FSJ Joint The Machinability of CFRP with Cutting Movement of End-Milling The Research of FPGA-Based Short Current Protection for Micro Electrochemical Machining Tool Wear Characteristics in Near-Dry Cutting of Ni-Based Superalloy Wear Monitoring of Steel Ball of a CNC Machining Centre by Using Surface Roughness of Finished Test Pieces A Novel Tape and Diamond Process Developed for Polishing Hard Substrates Effects of Filler Compositions on Mechanical and Physical Properties of the Dissimilar Resistance Spot Welded between Aluminium Alloy and Carbon Steel Electric Arc Furnace Dust Treatment Process by Iron Powder Heat Treatment and Mechanical Testing of AISI H11 Steel Mechanical Properties Evaluation of Metal Components Repaired by Direct Metal Lamination Smoothing of GaN Substrate by Ultraviolet Assisted Polishing in KOH Solution Study of Electroplated Nickel Layer Thickness and Saw Parameters on Cutting Performance in Diamond Wire Sawing of Sapphire Ingots Design of Rotoformer Mechanism and Cooling Steel - Conveyor in Sulfur Granulation Systems Effects of Focusing Condition on Micro-Welding Characteristics of Borosilicate Glass by Picosecond Pulsed Laser Gloss Evaluation of Hairline-Finished Metal Surface Using Patterned Area Illumination Method: Reproduction of Gloss Evaluation by Ray Tracing Investigation of Crack Generation in a Notch during Diameter-Enlargement Working Method Processing Recommendation of a Measure for Enhancing the Precision of Dimensions of Foil Products in Single Point Incremental Forming Technology Simulation of Cracking Behavior in Planar Solid Oxide Fuel Cell during Thermal Cycling Tensile Strength and Metallurgical Analysis in Anodized Al/Cu Joint Using Friction Stir Welding Viscous Dissipation Effects on the Coating Resin Flow Characteristics in High-Speed Optical Fiber Coating Process Behavior of MnS on Belag Formation and Observation on Carbide Tool Chapter 3: Applied Research in Materials Science Development of a Computer Generation Holography for Generating Square Matrix Light Spots Applied to the Laser Patterning System Numerical Analysis for the Growth of Epitaxy Layer in a Large-Size MOCVD Reactor Modelling of Granular Solid-Structure Interaction: A Comparative Study Using Conventional FEM Approach and Linked DEM-FEM Approach Simulation of the Effective of Friction on the Deformation in Equal Channel Angular Pressing (ECAP) Simulation of Effective Stress and Temperature Field of the Die and Workpiece during ECAP of Pure Titanium at Different Ram Speeds by Finite Volume Method A Parametric Study of Diesel Oxidation Catalyst Performance on CO Reduction in Diesel Dual Fuel Engine Exhaust Application of Taguchi Method to Optimize the Operating Parameters for a Solid Oxide Fuel Cell Combination of Au Dielectrophoresis Chip and Optical Tweezers for Cell Culture Concentration Gradient Effect on the Capturing Ratio of Nanopore for DNA Development of a Portable Optical Interferometry Microscope System Nanopore Positive Pulse Detection of DNA with Salt Gradients Kinetics of Microwave Vacuum Drying of “Cat Chu” Mango in Mekong Delta - Vietnam Swelling Behavior of Soft and Biological Materials Chapter 4: Applied Mechanics and Mechanical Technologies A Novel Mechanical Design of Automatic Laser Target-Scoring Systems A Double-Sided In-Plane Lateral Comb-Drive Actuator Fabricated by a Plaster-Based 3D-Printer Controlling Wrinkling and Flatness during the Processing of the Bend Section of a Pipe by Applying Vibration to the Mandrel Theoretical Modeling and Fabrication of Two-Dimensional Microstructures by Using Micro-Anode-Guided Electroplating with Real-Time Image Processing An Analysis of the Lubrication Characteristics of Mechanical Seals with Parallel Sealing Faces Using an Average Flow Model Analysis of Dynamic Contact and Carrying Capacity Factors for Super-Modulus Pinion and Rack Concentrated Photovoltaic System with Multi-Curvature Fresnel Concentrator Consideration of Interlock System Applicable to Pneumatic Driving Systems as the Safety System (BS/EN764-7) Design Calculation for Wedge Cam of Small Roller Centering Three-Jaw Jig Design of Shielding System for Impulse Ground Penetrating Radar Applications Development of Herringbon-Grooved Aerodynamic Journal Bearing Systems for Ultra-High-Speed Rotations Dynamic Analysis of Offset Printing Press Gear-Cylinder-Bearing System under Time-Varying Meshing Stiffness Effect Fault Diagnosis Research for Mine Fan Based on the CFD Gradient Force of Electromagnetic Strength to Drive Precisely the Small Mass Implementation and Validation of the Jet Flame Model Using C++ Open Source Codes Computational Fluid Dynamics Software Investigation of Optimum Assembly Tolerance for a Machine Tool Spindle Investigations of Cylindrical and Conical Whirl Instabilities on Hydrodynamic Journal Bearings Non-Linear Analysis and Modeling of the Structure with Bolted Joints Optimization of Low-Noise and Large Air Volume Blower Based on Load Characteristic Research on Acoustic Radiation Characteristic for Cylindrical Structure with Elastic Plate Cap in Mid-Frequency Region Researching and Calculating the Effect of the Slides and the Nozzles’ Structural Positions of "Rice Sorting Machine” Testing and Improvement of Static Performance of Proximity Sensor for a Mobile Robot The Data Combining Method and the Forming Control Algorithm from the 3D Scanning Machine and Processing in the SLS Machine The Effects of High Pressure Gas Burner Parameters on Thermal Efficiency for 2014 International Conference on Machining, Materials and Mechanical Technology (IC3MT) The Point-Array Coupling Algorithm in 3D Scanning Machine by Laser Ray Thermal Conduction Measurement and Analysis for a Spaceborn Sensor Thermal-Structural Analysis for the Optimization of a Low Beam Projector Headlight Design Chapter 5: Measurements and Monitoring Micro-Hole Diameter Inspection Using Audible Sound On the Development of Virtual Inner Loops for Feature Recognition Accuracy of Three-Dimensional Shape Measurement Using a Triangulation Method Sensor with Optical Skid Comprehensive Calibration of Structured Light Measurement System Using Planar Chessboard Designing and Implementing the Remote-Environmental-Parameters-Monitoring-by-Internet KIT On the Development of Blend Faces and Holes Recognition Algorithm for CAE Applications


Best Sellers


Product Details
  • ISBN-13: 9783038269625
  • ISBN-10: 303826962X


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Recent Development in Machining, Materials and Mechanical Technologies
-
Recent Development in Machining, Materials and Mechanical Technologies
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Recent Development in Machining, Materials and Mechanical Technologies

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!