close menu
Bookswagon-24x7 online bookstore
close menu
My Account
Renewable Energy and Power Technology II: (Volumes 672-674 Applied Mechanics and Materials)

Renewable Energy and Power Technology II: (Volumes 672-674 Applied Mechanics and Materials)

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

Collection of selected, peer reviewed papers from the 2014 2nd International Conference on Renewable Energy and Environmental Technology (REET 2014), August 19-20, 2014, Dalian, China. The 426 papers are grouped as follows:
Chapter 1: Development and Utilization of Solar Energy;
Chapter 2: Development and Utilization of Biomass Energy;
Chapter 3: Development and Utilization of Wind Energy;
Chapter 4: Nuclear Energy and Other Energy;
Chapter 5: Energy-Saving and Energy-Storage Technology;
Chapter 6: Chemical Engineering, Energy Materials and Fuel Cell;
Chapter 7: High Voltage and Insulation Technology;
Chapter 8: Electrical Theory and Power Electronics;
Chapter 9: Power System and Automation;
Chapter 10: New Energy Vehicles and Electric Vehicles;
Chapter 11: Motor and Electric;
Chapter 12: Power Grid Technology;
Chapter 13: Power Systems Management;
Chapter 14: Engineering Thermodynamics and Thermal Engineering;
Chapter 15: Power Machinery and Engineering;
Chapter 16: Fluid Machinery and Engineering;
Chapter 17: HVAC, Air Conditioning and Refrigeration;
Chapter 18: Mechatronics and Automation;
Chapter 19: Green Building Materials, Energy-Efficient Buildings and Construction Technology;
Chapter 20: Computational Mathematics and Modeling, Data Processing, Communication and Information Technologies;
Chapter 21: Demand, Supply, Development, Management of Energies and Resources;
Chapter 22: Industrial Engineering and Project Management;
Chapter 23: Engineering Education.



Table of Contents:
  • Preface and Conference Organization
  • Chapter 1: Development and Utilization of Solar Energy
  • Application of Improved Invariant Moments and SVM in the Recognition of Solar Cell Defects
  • Case Analysis of the Solar Heating System Assisted by Condensing Wall-Mounted Gas Heater
  • Case Study: Environmental, Techno-Economic Feasibility Analysis of Grid-Connected Photovoltaic Power Plants in China Using RETScreen
  • Design and Application of a Seasonal Solar Soil Heat Storage System Applied in Greenhouse Heating
  • Design and Development of Intelligent LED Plant Light Supplement System Based on Solar-Powered for Facility Agriculture
  • Development of Solar Cell Module Cooling Device Using Coolant Circulation and Control System
  • Development Prospect of Chinese Photovoltaic Industry with Scenario Analysis
  • Economic and Environmental Assessments of Two Installation Types of Photovoltaic Systems in Shanghai
  • Electrical Performance Results Comparison of Photovoltaic Module between Two ISO 17025 Certified Laboratories
  • Experimental Investigation on a Grid-Connected Photovoltaic Air Conditioning System
  • Feasibility Study of Distributed Roof Photovoltaic Generation Technology Applications in Shanghai
  • Operation and Control of a Microgrid Containing PV Cells and Battery
  • Research on Application of Intelligent Solar System in Stadium
  • Study of Photovoltaic Energy Storage EMS Based on LabVIEW Data Acquisition
  • Study on the Control Strategy of PV-Energy Storage Microgrid Working in Islanded Mode
  • The Performance of a Novel Solar Cooling and Power System with Different Working Fluids
  • The Research on the Planning of Distributed PV Systems in Connection with Urban Distribution Network
  • The Research Progress of Solar-Driven Humidification-Dehumidification Desalination Technology
  • Design of Solar Tracker Based on Square Structure and Camera Device
  • Experimental Investigation of Using Solar Chimney to Induce Natural Ventilation
  • Feasibility Study about Solar Energy-Air Source Heat Pump System in Cold Region Rural Residential Applications
  • Research on Detection Technology of Distributed Grid-Connected Photovoltaic Power Generation
  • The First Solar Power Tower System in Saudi Arabia
  • Designing and Realization of a Water Quality Detecting Instrument Based on Solar Power
  • Design and Application of a Medium/Low-Power Stand-Alone/Grid-Connected Dual-Mode Inverter for Solar Photovoltaic System
  • Research on Intelligent Control Technology of PV Grid-Connected Inverter
  • Chapter 2: Development and Utilization of Biomass Energy
  • Bio-Oil Production from Fast Pyrolysis of Corn Stalk in a Fluidized Bed
  • Comparison of Capacity for 2,3-Butanediol Production from Corn Cob Hemicelluose Hydrolysate Fermentation by Klebsiellaoxytoca HD79 and Klebsiellapneumoniae
  • Effects of Hydrothermal Pretreatment on the Content and Structure of Lignin Extracted from Corncob
  • Effects of Temperature on Mixed-Culture Fermentative Hydrogen Production from Corn Stover Hydrolyzate
  • Hot Air Ignition Characteristics of Cotton and Corn Straw Pellet Based on TG-DTG
  • Study on Mechanisms of Liquefied Corn Bran by FT-IR
  • Study on the Saccharification Conditions of Fuel Ethanol from Corn Straw
  • Experiment Research on the Purification Technology of Biogas as Engine Fuel
  • Chapter 3: Development and Utilization of Wind Energy
  • 5MW Offshore Wind Turbine Control Based on Pitch Joint Torque Controller
  • An Online Rolling Dispatch Optimization Strategy for the Access of Intermittent New Energy
  • Application of Recurrence Plot to Wind Power Predictability Study under Different Sampling Intervals
  • Applied Research of Convertible Wind-Solar Hybrid System on Matlab
  • Comprehensive Evaluation Index on Voltage Fluctuation and Stability Considering Wind Power Generators
  • Define China's Wind Power Industry Life Cycle Based on the Compartz Curve Model
  • Design of the Superconducting Excitation Winding for 12 MW Direct-Drive Wind Generator
  • Dynamic Torsional Load Control of Double-Fed Wind Turbine Drive-Train Based on Three-Mass Shaft Model
  • Effect of Large-Scale Wind Power Integration on Inter-Area Oscillation of Power System
  • Energy Management and Coordinated Control Strategies of Isolated Micro-Grid with Wind Turbines and Seawater Desalination Devices
  • Kemskaya Wind Power Plant in Karelia
  • Optimal Wind Power Planning Considering Power System Adaptability and Economy
  • Planetary Gear Train Used in Wind Driver Generator Based on TCA
  • Study on Application of STATCOM in Dynamic Reactive Power Compensation of Wind Farm Integration
  • Study on Dispersed Wind Power Connected to Power Grid
  • Study on Wind Power Heating Mode and Operating Characteristic
  • Technical and Economic Analysis on Grid-Connected Wind Farm Based on Hybrid Energy Storage System for Active Distribution Network
  • Technology of Wind Power Forecasting Accuracy Assessment and Curtail Quantity Estimation with Power Capacity Limited
  • The Development of the Wind Power Industry in Western Jilin
  • The Research of Wind Power Accommodated Capacity Based on Power Balance
  • Three-Column Floating Wind-Current Generator and the Analysis of Performance
  • Wind Data Anomaly Detection and Interpolation of Missing Data
  • Wind Speed Forecasting in Wind Farm
  • Wind Power Development in Power Grid and Study on Dispatching Strategy
  • Dynamic Multi-Objective Power Dispatch Considering Load and Wind Power Variations in Wind Power Integrated System
  • Dynamical Analysis of Wind Turbine Helical Gear System Based on Flexible Supporting
  • Economic Comparison of VSC-HVDC and HVAC Systems for Connections of Offshore Wind Farms
  • Modal Research on the Low-Frequency Oscillation of AC/DC System with DFIG-Based Wind Farms
  • Multi-Object Optimization Research about Wind/Solar Hybrid Generation System
  • Containing Small Hydropower and Wind Power System Optimal Spinning Reserve
  • Impact of Wind Farm Output Fluctuation on Static Stability of Grid
  • Quantifying the Risk of Wind Power Forecasting Error on Power System Optimal Dispatching
  • Research of Robust State Estimation Method and Program Implementation Considering Large-Scale Wind Power Integration
  • Research on the Peaking Gap of Power System with Large-Scale Wind Power Integration
  • Chapter 4: Nuclear Energy and other Energy
  • Calculation on the Distribution of Ex-Core Neutron Flux during Reactor Start-Up
  • Effects of Groundwater Heat Pump Systems on the Temperature and Quality of Groundwater in Recharged Aquifer
  • Efficiency and Performance Analysis of Tidal Current Energy Turbine Basing on the Unidirectional Fluid-Structure Interaction
  • Experimental Study of the Temperature Field in Fire Caused by Sodium Leakage in Sodium-Cooled Fast Reactor Loop
  • Fabrication of Titanium Doped Hollow Glass Microspheres for Inertial Confinement Fusion Targets by Dried Gel Method
  • Novel Trapezoidal-Loop Piezoelectric Energy Harvester
  • Optimal Design of the Mooring System for a Floating Hybrid Ocean Renewable Power Generation System
  • Research on Geothermal Power Generation Technology and its Development Trend
  • Safety Performance Evaluation of Nuclear Power Station Containment
  • Status and Trends of Renewable Energy Harvesting
  • Studies on Geothermal Heating and its Related Issues
  • Study on a New Array of Oscillating Wave Energy Converter
  • Study on Operation Strategies of a Hybrid Ground-Source Heat Pump System with Surface Water Heat Exchangers for an Exhibition Building
  • The Monitoring Data Analysis of the Running Condition in Winter in Line with the Demonstration Project about Soil Source Heat Pump in Severe Cold Regions
  • Wave Data Analysis for Wave Energy Power in Namae Coast
  • Environmental Assessments for Wetlands and Estuaries Management near Tidal Power Plant Using of Mass Balance Simulation
  • Prospect and Suggestions on the Development of Wave Energy Resource in the South China Sea
  • Research on the Development and Utilization of Geothermal Energy
  • Optimization Technique for Allocation Scheme and Hydro Power Plant Parameters with Respect to Regional Peculiarities
  • The Balance of Power System Peak Load Regulation Considering the Participation of Nuclear Power Plant
  • Chapter 5: Energy-Saving and Energy-Storage Technology
  • A Newly Energy-Saving Movable Piezoelectric Carpet
  • A Study on Supply with Consideration on Expectation Level of Energy-Saving Technology and Consumption Pattern of Consumers – Focusing on Boilers
  • An MILP Formulation for the Thermal Unit Commitment Problem Considering Start-Up and Shut-Down Power Trajectories
  • Applying Research on Campus Energy-Saving Power Monitoring System
  • Cost-Benefit Analysis Model of Single and Hybrid Energy Storage System in Active Distribution Network
  • Damper Optimization Design of High-Speed Energy Storage Flywheel Shafting with a Single Point Flexible Support
  • Data Center Room Air Conditioning Energy Consumption Analysis
  • Energy Saving Operation Strategy of an Existed Indoor Ice Rink
  • Optimal Method of Energy Storage Configuration Considering Operation and Penalty Cost
  • Preparation of Ternary Composite Phase Change Storage Mortar
  • Study on Door & Window Energy-Saving Technology at Hot-Summer and Cold-Winter Zone
  • Study on Energy Saving from Intermittent Operation of Air-Conditioning System
  • Energy Performance of External versus Internal Shading Devices in Residential Buildings
  • Energy Saving at Home
  • Energy-Saving Analysis about Control Strategy of District Heating System
  • Numerical Simulation of Heat Transfer outside the Tube of the Evaporative Air Cooler
  • Finite Element Analysis of the Magnetic Field Simulation of High Temperature Superconducting Magnet
  • Pumping Action of Heat Transfer for Free Convection Flow in a Ventilated Facades
  • Research of Architecture Based on Distributed Source Plug and Play
  • Autonomous Energy Efficient Co-Generation Units
  • Chapter 6: Chemical Engineering, Energy Materials and Fuel Cell
  • A Three-Dimensional Model for Mass Transfer in Vanadium Redox Flow Battery
  • Amorphous Alloy Ni-Fe-B: Preparation, Characterization and its Catalytic Ability for Hydrogen Generation
  • Analysis of Temperature Field in an Oil-Shale Retorting Furnace with Gas Heat Carrier Based on CFD
  • Contrastive Study on Microwave Pyrolysis Products of Coal under N2 and Non-N2 Atmosphere
  • Degradation and Performance of SOFC Cathode
  • Fe-C-N Catalysts Prepared by Magnetron Sputtering for Oxygen Reduction Reaction in a Neutral Solution
  • Heteropolyanion Substituted Layered Double Hydroxide as Recoverable Catalyst for the Oxidative Desulfurization of Simulated Fuel Oil and Diesel
  • High-Pressure Design of Composite Vessel for Hydrogen Gas
  • Hot Water Extraction and Fixed Bed Pyrolysis for Bitumen Recovery of an Indonesian Oil Sand
  • How to Advance the Hydrogen Production Efficiency by Adding Rare Earths in the Process of Eelectrolysis of Water?
  • Hydrated Proton Transfer in Nafion117 Membrane
  • Hydrothermal Synthesis and Electrochemical Performance of LiNi0.5Mn0.5O2 as Lithium-Ion Battery Cathode
  • Lithium Ion Battery Efficient Thermal Management Numerical Simulation Research
  • Lithium Ion Battery Temperature Field Numerical Simulation Research
  • Oxygen Reduction Reaction on Pt Surface in PEM Fuel Cell Cathode Based on the First-Principles Molecular Dynamics
  • Preparation of Pd-Cu-Ce Hydrogen Separation Membrane Alloys
  • Pyrolysis of Hailar Lignite: Experiments with a Tubular Reactor and a Continuous Screw Kiln Reactor
  • Research on the Microwave Pyrolysis of Coal under N2 Atmosphere
  • Research Progress on Polyoxymethylene Dimethyl Ethers as the Additive Component of Diesel Fuel
  • Simplified Least Squares - Support Vector Machines for Lead-Acid Batteries SOC Estimation
  • Study on Synthesis of Alkynoxymethyl Benzyl Quaternary Ammonium Salt and its Corrosion Inhibition for Blast Furnace Gas Pipeline
  • Study on Synthesis of Polycarboxylate Superplasticizer at Room Temperature
  • Synthesis of La1-xSrxGa1-yMgy-zMzO3−δ (M=Cr, Mn, Fe, Ni, Co) Electrolyte for IT-SOFCs by Laser Rapid Sintering
  • Synthesis, Electrical Conductivity and Electrochemical Properties of SrFe1−xSbxO3−δ as Cathode Materials for IT-SOFCs
  • The Application of High Temperature Foam Surface Active Agent Used in Heavy Oil Thermal Recovery
  • The Core System Design for New Kilowatt Aluminum-Air Battery
  • The Effect of Temperature on the Morphology and Electrochemical Performance of Li3V2(Po4)3 Cathode Material
  • The Structural and Hydrogen Storage Properties of Al-Doped Boron Nitride Nanotube
  • Update Progress of Pressurized Entrained-Flow Gasifier with Coal Slurry in China
  • Research on the Effect of Movable Gel Flooding after Polymer Flooding
  • A Separated-Frequency Parameters Identification Method of Li-Ion Battery Model for Electric Vehicles
  • Synthesis of Nanosized ANNT Series Ceramic Powder by Citrate Wet Chemical Method
  • Aqueous Two-Phase System in the Synthesis of Starch Graft Acrylamide Polymer
  • Swelling and Antibacterial Properties of Chitosan/Poly(vinyl alcohol) Hybrid Hydrogels
  • Parametric Optimization of Organic Rankine Cycle by Genetic Algorithm
  • SF6 Byproducts in Simulated Electric Equipment of Overheating Faults in High Humidity
  • Chapter 7: High Voltage and Insulation Technology
  • Analysis of the Influence of Electric Field on Current Error of High-Voltage Three-Phase Three-Element Combined Transformer
  • Analysis of Trip Faults and Protection Measures on 10kV and 20kV Distribution Lines
  • Effect of Electrical Aging on the Trap Parameter of HVAC XLPE Cable Insulation
  • Electric Field Analysis Based on FEM and Corona Test of 330 kV Dampers
  • Research of Influence of Tower Type on Lightning Back-Flashover Performance at High Soil Resistivity Areas
  • Research on Corrosion Diagnostic Model of Grounding Grid Based on Tellegen's Theorem
  • Simulation Study of Partial Discharge UHF Wave Transmission Characteristic in GIS Typical Structure
  • Study on DC Bias Magnetic Properties of Transformer with Different Structures
  • Study on the Identification of Lightning Over-Voltage Based on ATP-EMTP
  • Study on Typical Compact Structures and Faults of 220kV Cable-Conductor Bushings
  • The Design of High-Voltage Cable Partial Discharge On-Line Monitoring System Software
  • The Dynamic Galloping Characteristics of Icing Guyed HVDC Tower
  • The Dynamic Influence of HV Controllable Reactor on Net Loss
  • The Hardware Design of Partial Discharge On-Line Monitoring System in High Voltage Cable
  • The Influence of Main Components in PM2.5 on Composite Insulator Contamination Flashover Characteristics
  • The New Development Trend of Distribution Transformer
  • The Whole Simulation Analysis and Measurement of the Power Frequency Electric Field in 500kV Substation
  • Effect of Substation Network on Transformer PD Monitoring
  • Experimental Study on Short-Circuit Withstand Capability of 110kV Power Transformer
  • Functions and Theoretical Basis of Partial Discharge On-Line Monitoring System for High-Voltage Cables
  • Experimental Investigation on Breaking Characteristic of Load Switch in Medium High Voltage Ring Network Cabinet
  • A Power Flow Method for VSC-Multi-Terminal Hybrid System Based on Asynchronous Iteration Algorithm
  • Analysis and Countermeasures of Value Side Bushing Fault of Converter Transformer in Gezhouba to Nanqiao HVDC Transmission Project
  • Chapter 8: Electrical Theory and Power Electronics
  • Cell Analytic Application Based on Dielectrophoresis Microchip
  • Design and Implementation of LDPC Encoder / Decoder in the Atmospheric Laser Communication
  • Design and Simulation of Booster's Controller Based on Matlab
  • Design for the Controller of Desktop 3D Printer
  • Design of Intelligent Lighting Control System Based on C-Bus
  • Effect of Traffic Flow on Characteristics of Piezoelectric Harvesting Unit
  • Study on Loss Calculation for Inverter Based on 1200V SiC MOSFET
  • Study on Power Supply of the Feeder Terminal Equipment
  • The Design of Cascade Switching Power Charger Based on PFC
  • The Research of Communication System of Civil Defense Engineering Based on Siemens PPI Bus
  • A Numerical Least Squares Analysis of Electromagnetic Compatibility
  • New Design of Selective Leakage Protective System in Underground LV Distribution Network
  • Multi-Resonant Compensation Analysis of Contactless Electrial Power Transfer System
  • Reactor Effects on the AC Governor System Transformer Grid Side Harmonics
  • Reliability Analysis of Distribution Network with Integrated Photovoltaic Power Generation
  • The Design and Research of Three-Phase Inverter Dual-Loop Control
  • Waveform Recognition Technology in Distributed Fault Location of Transmission Line
  • Control of CSR PWM Outer Current Loop Based on Fuzzy Algorithm
  • Research on Point Estimate Method and its Application to Calculation of Grounding Current under DC Bias
  • Design and Analysis of PCB Rogowski Coil Current Transformer
  • Chapter 9: Power System and Automation
  • A Classification Management Method of Non-Emergency Reserve under ‘Source-Grid-Load’ Interactive Condition
  • A Comprehensive Evaluation Method of Primary Frequency Regulation Based on Wide Area Measurement System Data
  • A Distribution Network Reconfiguration Method Considering Weather Conditions
  • A Network Topology Corrective Switching Algorithm for Eliminating Line Overloads
  • Controller Parameters Optimization of PWM Converter Based DFIG
  • DC Protective Measurement and Control Device for Mass Transit Based on VxWorks
  • Design and Development of HLA-Based Operation-Maintenance Integration Training Simulation System
  • Linear State Estimation Based on Measured Quantity Transformation and Calculation of Transmission Losses
  • Maximum Integration Capacity Analysis of Distributed Generator in Distribution Power System
  • Operation State Evaluation of Distribution Network Based on Attribute Mathematics
  • Optimal Power Flow Considering Generator Number Constraint on Regulation of Active Power Output
  • Optimization of Relay Graph Splicing Based on Repulsion-Tension Algorithm
  • Previous Research of Real Time Power System Dynamic Monitoring Master Station System Test Specification
  • Quantitative Analysis of the Fluctuation Reasons of Grid Line Loss Rate
  • Research on Bus Coupler Charging Protection Problem
  • Smoothness Prior Approach to Removing Nonlinear Trends from Signals in Identification of Low Frequency Oscillation Mode
  • Spatial Load Forecasting Based on Load Forecasting Reliability
  • Study on Power Flow Calculation Using PSASP
  • Study on System Loss in Distribution Network with DG
  • Substation Locating Method in Integrated Relay Graph Splicing Based on Improved Genetic Algorithm
  • The Analysis Method of Potential Loss in Gansu Power Based on DEA
  • The Improved Five-Zone Control Theory with Considering Dynamic Reactive Power Compensation Device
  • Numerical Investigation on Transmission Line Conductor Icing
  • Experimental Analysis and Engineering Design of Laser Removing Technology for Extra Matters on Overhead Lines
  • Optimal Distributed Generator Allocation in Active Distribution Network Considering Reconfiguration
  • Divergence Law of Ground Current about DC Transmission System
  • Study on Coordinated Control of Multi-Distribution Static Var Compensator
  • Optimal Planning on Reactive Power Compensation of Distribution Network Based on Back/Forward Sweep Method and Tabu Search Algorithm
  • Interference on Geoelectrical Resistivity Observation from DC Power Transmission Line
  • Performance Comparison of Typical Built-In UHF Sensors Used for GIS PD Detection
  • Power Transformer Life Analysis Based on Risk Assessment
  • The New Methodology of Diagnosis for Transformer Inter-Turn Short Circuit Based on Wavelet Analysis
  • The On-Line Monitoring of the Winding Deformation of Transformer Based on the Improved Ultrasonic Ranging Method
  • Chapter 10: New Energy Vehicles and Electric Vehicles
  • Electric Load Forecasting of Electric Vehicles in Charging
  • Energy Harvesting Shock Absorbers for Vehicles: Design, Modeling and Simulation
  • Fast Service Restoration of Multi-Source Active Distribution Network with Microgrids and Electric Vehicles
  • Research on the Optimum Continuous Mileages under the Pure Electric Mode of Plug-In Hybrid Electric Vehicles
  • The Optimization Model of Planning Electric Vehicle Charging Station
  • Chapter 11: Motor and Electric
  • Analysis of the Sensorless PMSM Control Technique in the Full Speed Section
  • Analysis of the Stator Current Change on QFQS-200 Synchronous Generator Loss of Field Procession
  • Design of Drive Circuit for Permanent Magnet Brushless DC Motor
  • Design of Locomotive Intelligent Watt Hour Meter Based on STM32
  • Designed Controller of Permanent Magnet Brushless DC Motor Based on DSP
  • Efficiency Optimization in Speed-Sensorless Control of Induction Motors
  • Experiment Research on Five-Segment Type Space Vector Pulse Width Modulation for Permanent Magnetic Brushless DC Motor
  • Lissajous Curve of an Auxiliary Winding Voltage Park Components for Diagnosing Multiple Open Switches Faults in Three Phase Inverter
  • Simulation of Permanent Magnet Synchronous Motor Field Oriented Vector Control System
  • The Establishment of Time-Varying Parameter Model of the Synchronous Generator Loss of Field
  • Three Phase Induction Motor Inverter Defects Diagnosis Using Voltage Spectrum of an Auxiliary Winding
  • Research on Speed Sensorless Vector Control of Induction Motor
  • Calculating the Maximum Penetration Capacity of Distributed Generation Considering Current Protection
  • Chapter 12: Power Grid Technology
  • Analysis Method of Power Flow in Urban Power Grid with Distribution Generation Based on Dynamic Probability Model
  • CIM Extensions for the Distributed Energy Resources Integration
  • Micro-Grid Energy Optimization Base on Installing Heat Storage Tank to Decouple “Heat-Load-Based” Running Constraint of CHP
  • Modified Suggestions for Distribution Automation Standards to Coping with DG Connected to the Power Grid
  • Networked Intelligent Perception Technology and its Application in Smart Distribution Grid
  • Rapid Double-Layer Identification Method of Multi-Relevant Bad Data in Large-Scale Power Grids
  • Research and Application of Comprehensive Evaluation Index System in Micro-Grid’s Construction and Operation
  • Research and Application of Integrated Standardization Theory in the Smart Grid Scheduling and Controlling System
  • Research on AC-DC Power Flow to Solve the Instability of Micro-Grid
  • Research Status of Key Technologies of Seamless Switching in Micro-Grid
  • Scenario-Based Stochastic Programming Strategy for Microgrid Energy Scheduling Considering Uncertainties
  • The Controller Parameters Optimization for Droop Controlled Distributed Generators in Microgrid
  • Two-Layer Optimize Algorithm for Microgrid Economic Dispatch
  • Research on Supporting Role of Smart Grid in Wisdom City
  • Security and Stability Control System Testing Platform for Guangxi Region Power Grid on RTDS
  • Discussion about the Critical Business Demand of Smart Distribution Grid and Utilization
  • Micro-Grid Energy Optimization Include Battery-Swapping-Station
  • The Implementation Pattern of Smart Distribution Grid and Utilization
  • New Method of Overhead Line Icing Online Monitoring
  • Close-Operation Overvoltage of No-Load Transmission Line with Fault Current Limiter
  • Study of the Winding Temperature Distribution for Distribution Transformers
  • Chapter 13: Power Systems Management
  • Analysis of the Characteristics and Effects for Sichuan Province Electric Power Consumption
  • Analysis on Power Grid Investment Base on Cointegration Theory and VAR Model
  • Intellectualization and Reliability Evaluation of Distribution Network Based on Principal Component Analysis
  • Medium and Long-Term Load Forecasting Using Grey Theory Based on Rough Sets
  • Research on Optimization Model of Overseas Investment for Power Grid Enterprise
  • Short Term Load Forecasting Based on Fuzzy Clustering
  • Study on Application of Multi-Kernel Relevance Vector Machine in Data Validation of Thermal System in Power Plant
  • Study on Dynamic Bayesian Game of Power Grid Crisis Management
  • Study on the Theoretical Basis of Power-Grid Crisis Management
  • Advanced Progress in Diagnosing the Reliability of Electrical Equipments by Infrared Thermography
  • Application of Service Flow Technology Based on IEC 61970/61968 to Electric Power Information System
  • Research on Reliability Evaluation Methods of Distribution System
  • Chapter 14: Engineering Thermodynamics and Thermal Engineering
  • Flow Boiling Enhancement by the Surface Quenched in Nanofluid
  • Numerical Analysis of Distribution of Ion Concentration Affected by Flame Temperature behind a V-Gutter Flameholder
  • Numerical Simulation for Heat Transfer and Fluid Flow Performances of Thin Film Evaporation in the Micro Rectangular Groove
  • Numerical Simulation on Effects of Variable Specific Heat Ratio on Floating Ejector Nozzle
  • Optimization of Parameters of Heat Exchangers of Air Heating Systems
  • Overview on the Determination Method of Viscosity Parameter of Organic Heat Carrier
  • Research on Double-Stream Coil-Wound Heat Exchanger
  • Research on Heat Storage-Release Property of Rectangular Array Tube Encapsulated Heat Storage Device
  • Research on Operation Optimization of Industrial Boiler by Principal Component Analysis
  • Simulation Investigation on Structural Parameter of Hot Air Igniter of Biomass
  • Study on the Basic Characteristics of Low Oxygen Air Combustion with Natural Gas in Glass Tempering Furnace
  • Test and Research for Mercury Emission of Boilers in 700 MW Units
  • The Study of Heat Transfer between Adjacent Units on Household Heat Metering
  • Numerical Simulation Analysis of the Optimized and Transformed 200MW Pulverized Coal Fired Boiler Burner
  • Chapter 15: Power Machinery and Engineering
  • Active Predictive Control of Turbine Tip Clearance for Aero-Engine
  • Analysis of the Movement of the New Wave-Energy Dynamoelectric Equipment
  • Based on Concept of Generalized Instantaneous Space of Dynamic Performance Analysis
  • Compressor Performance Curve Extrapolation Method Based on the Similarity Theory
  • Finite Element Analysis of Large-Size Yaw Bearings with Supporting Structure in Wind Turbine
  • Harmonic Balance Analysis for the Oscillations of Magnetic Levitation
  • Multiple Models Fuzzy PID Controller Design in Ship Power System
  • MV “CRYSTAL STAR” Diesel Turbocharger Surge Cause Analysis and Troubleshooting
  • Research on Fast Driving Control Technology of Electric-Control Injector for Marine High Pressure Common Rail Diesel
  • Research on the Measuring and Calculating Methods of the Relative Internal Efficiency for Steam Turbine
  • Study on the Effects of Oxygenated Fuels on Diesel Engine Performance
  • Performance Model Development for the Adjustable Blades Axial Flow Fan Based on Multivariate Polynomial Fitting
  • Application of Siemens T3000 System Self Startup Control for Thermal Power Plant
  • Research Progress in Natural Frequency Calculation of Heat Exchanger Tube Bundles
  • Mechanism Analysis of a Boiler Economizer Corrosion
  • Economic Analysis of Water Source Heat Pump Using Thermal Power Plant Circulating Water Waste Heat
  • The Tooth Profile Design and Examination of Circular-Arc Gear Pump
  • Chapter 16: Fluid Machinery and Engineering
  • Hydraulic Steering Gear Failure Analysis and Troubleshooting for MV “TANSUO HAO”
  • Hydro Turbine Nonlinear Model Parameter Identification Based on Improved Biogeography-Based Optimization
  • Simulation and Experiment of Residence Time Distribution in Short-Contact Cyclone Reactors
  • Study of Coupling Numerical Flow Field Simulation of Low-Pressure Last Stage Exhaust Passage in Steam Turbine
  • Study of Pressure Characteristics in PWM Controlled Variable Rate Spraying System
  • Floating Ring Balance Analysis of Journal Floating Ring Hybrid Bearing in Turbulent Regime
  • Research on Supersonic and Subsonic Field of Externally Pressurized Gas Lubricated Bearing
  • The Mixed Modeling of the Steam Turbine Flow Characteristics Based on Improved Particle Swarm Optimization Level
  • Numerical Optimization for Bottom Structure of ZGM Medium Speed Mill
  • Chapter 17: HVAC, Air Conditioning and Refrigeration
  • Analysis on Thermal Comfort of Air-Conditioned Buildings in Malaysia: Case Study of Universiti Tenaga Nasional
  • Dynamic Behavior of Air Condition System and Temperature Control Analysis
  • Entropy Analysis of a R32/CO2 Cascade Refrigeration Cycle
  • Experimental Research on Small-Scale Variable Flow Refrigeration System for Data Cabinets
  • Experimental Study on Throttling Refrigeration System Using Mixed Refrigerants
  • Research Based on the Actual Project of Central Air Conditioning Intelligent Frequency Conversion System
  • Simulation Analysis on Dynamic Load of Air-Conditioning System of Ocean-Going Ship
  • Simulation Study on Ventilation & Cooling for an Indoor Substation
  • Study on Performances of Refrigeration-Type Compressed-Air Dryers Using Environmentally-Friendly Refrigerants R717, R290 and R600a
  • The Application of Genetic Algorithm on the Regulation of Central Heating System
  • The Load’s Control of Central Air Conditioning System Based on Comfort
  • The Research of Constant Temperature and Humidity Air-Conditioning System of Underground Cellar
  • Baseline Load Models of Air-Conditioning in Commercial Buildings Considering Temperature and Seasons
  • Experimental Study on a New Type of Shipping Container Refrigeration Unit
  • Research on the Application of Alternative Refrigerants R407C and R410A in Refrigeration-Type Compressed-Air Dryers
  • The Development of Device for On-Line Monitoring Circulating Cooling Water Stability
  • CFD Simulation of Capillary Network Radiation Heating Comfort
  • A Study of Cooling Load Calculation of Stratified Air Conditioning System for Large Space Based on the Simultaneously Solving Model
  • Chapter 18: Mechatronics and Automation
  • Design and Simulation to Composite MPPT Controller on the Stratospheric Airship
  • Impedance Control Based Sliding Mode for Lower Limb Rehabilitation Robot
  • Optical Microscope Automatic Focusing Methods Research
  • The Design of Depth Drill Machine Based on Automatic Control AC Servo System
  • Research Progress in Electro-Hydraulic Position Servo Controller
  • Intelligent Control of Heating Systems in Public Building
  • Chapter 19: Green Building Materials, Energy-Efficient Buildings and Construction Technology
  • The Ecological Characteristics of Chinese Traditional Architecture
  • Analysis of Equilibrium and Carrying Capability of the Octahedral Truss Structure
  • Analysis of the Settlement in Rigid Pile Composite Foundation
  • Applied Research on Energy-Saving Technology of Buildings in Hot Summer and Cold Winter Regions of China
  • Building Electrical Design and Energy-Saving Measures
  • Combined Support Technology with Bolt, Steel Mesh and Anchor Applied in Baoxin Coal Mine
  • Experimental Investigations on Alkali-Activated Slag Cementitious Material
  • Investigation Progress of Phase Change Building Materials
  • Review of Crumb Rubber Concrete
  • Road Performance of Silane Coupling Agent Modified Rubber Concrete
  • The Relationship between Architectural Materials and Human Settlements
  • The Study on Promotion of Chinese Green Energy-Saving Buildings
  • Crack Resistance Design for the Circular Hydraulic Tunnel Lining Structures
  • Heating and Cooling Load Characteristics Comparison between Normal Building and Low Energy Consumption Building
  • Key Technologies and Trends of Passive Buildings
  • Relaxation Laws of Anchor on Pressure Dispersive Retaining Wall
  • CCHP System Operating Strategy Optimization Research in one of Shanghai Office Building
  • Research on Improved CCHP System Based on Comprehensive Performance Evaluation Criterion
  • Research on the Pass Optimization Design of Sintered Shale Porous Brick
  • Experimental Study on Additives for the Reduction of Alkalinity for Ecological Concrete
  • Study on the Dynamic Response of Prestressed Concrete Beam under Explosive Load
  • Three-Point Flexural Normal Stress Analysis of Wood-Bamboo Sandwich Composite
  • Research on Technology for Producing Green and Environmental - Friendly Silicate Glass
  • Numerical Modeling of Thermogravitational Convection in Air Gap of System of Rear Ventilated Facades
  • Chapter 20: Computational Mathematics and Modeling, Data Processing, Communication and Information Technologies
  • A Wavelet-Based Method for Automatic Location of Peaks in Gamma-Ray Spectra
  • An Efficient Coverage Hole Patching Algorithm Based on Intersection Knowledge
  • An Improved Method of Firewall Policy Anomaly Detection Based on Decision Tree
  • An Improved Trace Method for Moving Target under Occlusion
  • Decomposing Complete 3-Uniform Hypergraph into 5-Cycles
  • Gait Analysis and Trajectory Planning for Lower Limb Rehabilitation Training
  • Modeling and Evaluation in an Interworking of WLAN and WiMAX Network
  • Modeling of Content-Aware Based on Multi-Sources Heterogeneous Data Sensed in the Internet of Things
  • Multi-Focus Image Fusion Based on Pyramid Decomposition
  • Project Design on the Monitoring and Early-Warning of Pork Market in Beijing Based on Multi-Source Data Integration
  • Radon Transform Removes Correlation Noise Produced by Vibroseis
  • Reduction-by-Projection Method for Linear Programming Problems
  • Study on Defogging Effect Evaluation Method in Atomization Image
  • Study on Performance Comparison of OLSR and AODV Routing Protocols
  • The Design and Implementation of Android-Based Mobile Learning Platform
  • The Design of Library Management System Based on Internet of Things and Hand Lines Recognition System
  • Abstracting Clinical Pathway Sequence with Genetic Algorithm
  • Based on the Human Eye Fatigue Detection System of Recognition and FPGA Technology
  • Method of Fuzzy Modeling in Reliability Prediction Algorithm
  • Research and Application of Information Hiding Algorithm
  • Research on Caching Mechanism Based on User Community
  • Research on Integrals of the Second Category Curved Surface
  • Wireless Thermal Printer Based on Internet of Things
  • Application of Improved LMS Adaptive Algorithm in Acoustics Pyrometry
  • Application of Wavelet Analysis in Random Drift Signal Filtering of Fiber Optic Gyroscope
  • MCL and ACO Based QoS Routing Algorithm for WSN Used in Power Line Monitoring
  • The Interference Impact of UWB Sensor on Mobile Station of 3G Mobile System
  • Application and Research of Systematic Cluster in IED Switch Online Condition Monitoring
  • Star Simulator Base on Multiple LEDs, Optical Fiber and Integral Sphere
  • The Communication Research between PLC and PID Temperature Controller
  • Chapter 21: Demand, Supply, Development, Management of Energies and Resources
  • A Theoretical Framework on the Resource Industry: From the Value of Resource in Economy
  • Adjust Energy Structure, Promoting Chinese Environmental Protection
  • Assessment and Optimization of the Low Carbon Benefits of the Technical Transformation Projects for Loss Reduction in Power Networks
  • Construction of the Factors Affecting China's Hydropower Projects and Overseas Investment Risk Assessment Index System
  • Energy Consumption Forecasting in Hong Kong Using ARIMA and Artificial Neural Networks Models
  • Investment Decisions Based on the Postponed Options PROT Hydropower Project
  • On the Influencing Factors and the Continuous-Improving Mechanism of China’s Energy Efficiency
  • Research on the Utilization of Renewable Energy in Tianjin
  • Structural Decomposition of China’s Energy Use during 2000-2011 with World Input Output Table (WIOT) Data
  • Study on the Model of the Stability of International Energy Cooperative
  • Study on the Opportunities and Challenges of Chinese Energy Investment in the Middle East
  • The Characteristics of China's Hydropower Projects Overseas Investment Risk and Possible Countermeasures
  • The Research of Multiple Attribute Group Decision-Making Method Based on Cloud-PROMETHEE
  • The Research on Index System of Economic Society Development Based on the Medium and Long-Term Power Demand Forecasting
  • The Strategic Choice of Hexi New Energy Base under the Framework of the Silk Road Economic Belt: Based on the SWOT Analysis
  • Total-Factor Energy Efficiency and Influence Factors Analysis in Regions of China
  • A Survey on Ownership of Home Appliances and Electric Energy Consumption Status According to the Number of Household Member
  • Impacts of Electricity Price Reform on Energy and Residents’ Life in China
  • Research on the Evolution of the Complex Network Theory Based on the International Coal Trade
  • Renewable Energy Promotion Policy for Elementary, Middle, and High Schools in Seoul
  • Chapter 22: Industrial Engineering and Project Management
  • Device Risk Ranking Research Based on the Potential Life Loss
  • New Fuzzy Classified Model for Disaster Loss
  • Public Facilities Design in Sustainable Ways for Reconstruction Work of Yushu Area
  • Research on Choice of Logistics Mode of B2C Enterprises with FAHP
  • Investment Control of Construction Project
  • Accounting “Pure” Risks in Early Stage of Investment in Construction Projects with Energy Efficient Technologies in Use
  • The Way of Allocating Short-Supplied Talents in Multi-Project Based on Queuing Theory
  • Introduction of Complex Automation of Engineering Infrastructure for the Solution of Operational Problems in Public Sports Pools
  • Chapter 23: Engineering Education
  • Application of Research-Oriented Experimental Teaching in Biopharmaceutical Courses
  • College Students' Innovative Thinking Ability Training Process and the Observation Result
  • Research of Distance Education Based on Virtual Reality Technology in Power System
  • Study on the Environmental Education of Hydraulic Engineering
  • Study on the Mode of Talent Cultivating for Electrical Engineering and Automation Profession under the New Situation
  • Application of IOT in Physical Teaching of Ethnic Colleges
  • Research on the Application of IT in Electrical Automation Technology Major Course Teaching
  • Good Teaching Spirit Connotation and Countermeasure Analysis
  • The Impact of Information Technology on the Performance Evaluation System of Scientific Research in Universities


Best Seller

| | See All

Product Details
  • ISBN-13: 9783038266709
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 672-674 Applied Mechanics and Materials
  • ISBN-10: 3038266701
  • Publisher Date: 08 Oct 2014
  • Binding: Digital download and online
  • No of Pages: 2370


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Be The First to Review
Renewable Energy and Power Technology II: (Volumes 672-674 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Renewable Energy and Power Technology II: (Volumes 672-674 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Renewable Energy and Power Technology II: (Volumes 672-674 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    | | See All


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!
    ASK VIDYA