Home > General > Sensors, Mechatronics and Automation
Sensors, Mechatronics and Automation

Sensors, Mechatronics and Automation

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

Collection of selected, peer reviewed papers from the 2013 International Conference on Sensors, Mechatronics and Automation (ICSMA 2013), December 17-18, 2013, Kunming, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 244 are grouped as follows: Chapter 1: Applied Materials Science and Processing Technology Chapter 2: Sensors and Applications Chapter 3: Measurement Theory and Its Application Chapter 4: Measurement Technology and Instruments Chapter 5: Signal and Information Processing Technology Chapter 6: Image and Video Processing Chapter 7: Structural Engineering Analysis, CAD Optimized Design and Intelligent Control Chapter 8: Design and Control in Modern Engineering System Chapter 9: Modern Circuits and Embedded Systems Chapter 10: Industrial Engineering Chapter 11: Robotics Chapter 12: Optimization and Control Algorithms Chapter 13: Control System Modeling and Simulation Technology Chapter 14: Electric Automation, Control, Design and Analysis Chapter 15: Software, Computer Applications and Numerical Methods

Table of Contents:
Preface and Conference Organization Chapter 1: Applied Materials Science and Processing Technology A Novel Method to Dicing Anodically Bonded Silicon Glass MEMS Wafers Based on UV Laser Technique A Microfluidic Device for Sample Pretreatment by Laminar Flow Extraction Determination of Uranium in Ore with Volumetry of H2SO4-TICL3-NH4VO3 Mechanical Properties and Microstructure Analysis of Aluminum and Steel Dissimilar Material Weld Joint Sequence Determination of Cd and Pb in Honey by Incomplete Digestion-High Resolution Continuum Source Graphite Furnace Atomic Absorption Spectrometry Experimental Study on Axial Tensile Performance of Low Volume Fraction of Ternary Hybrid Fiber Reinforced Concrete Mechanical Properties of Nanocrystalline Coatings Prepared by Thermal Spraying Process Preparation and Ascertainment of Ingredient Contents of Uranium Ore Sandstone Standard Substance Study on Corrosion Behavior of A3 Carbon Steel in the Manicipal Sludge Study on Effect of High Oxygen Treatment on Storage Quality and Anti-Browning of Fresh-Cut Apples Study on Wall Slip in Pipeline Flow of Dense Paste Adsorption Characteristic Research of Sediments of Lake Baiyangdian Microstructure Evolution of Ti-6Al-4V Laser Weld Joint HAZ in Superplastic Deformation Process High Temperature Deformation Behavior and Dynamic Recrystallization Law of 33Mn2V Steel for Oil Well Tube Finite Element Analysis of 1-3-2 Piezoelectric Composite Resonance Frequency Characteristics Study on Novel Relaxor Ferroelectric Single Crystal PMNT/Epoxy Composite Transducer Array Preparation of Nd:YAG Nanopowders by the Urea Co-Precipitation Influence of Sulfur on the Long-Term Durability of SOFC Cathode Distribution Function for Nonlinear Potential Gradient High Pressure Plasma Analysis of Copper Wires Short Circuited Melted Mark Chapter 2: Sensors and Applications A New Approach for Autonomous Robot Obstacle Avoidance Using PSD Infrared Sensor Combined with Digital Compass Design of Wind Speed Measurement System Based on Integrated Navigation and Atmospheric Data Fusion Design and Build of a Nine-Axis Digital Output Gyroscope-Based Percutaneous Puncture Ultrasonic Navigation System Construction Principle and Application Test of 220kV Self-Healing Optical Voltage Sensor A Survey on QoS-Aware Secure Data Transmission in Multimedia Sensor Networks The Influence of Implantable Actuators on Residual Hearing: A Computational Study Wireless Sensor Networks for Structural Healthy Monitoring Applications-A Design Proposal Dynamic Estimation of Water Hyacinth Area by Fusing Data from Satellite and GPS Sensors Optimal Ecological Restoration of Degraded Wetland Ecosystem by Using Satellite Sensors PZT Based Ultrasonic Wave Force Detecting Sensor Research on Routing Protocol for Large-Scale Wireless Sensor Networks Research on Wireless MAC Protocols Oriented to Smart Clothing Sensor Node Identifier Resolution of IP-Based and Non-IP-Based WSN Study on the Conductivity of DMEM by PASCO Sensors Study on Transient Temperature Generator and Dynamic Compensation Technology Substation Equipment Temperature Monitoring System Based on Heterogeneous Wireless Sensor Network Tamper Detection in RFID Tags Using Zero-Watermarks Tuning Characteristics of DFB Diode Laser and its Application to TDLAS Gas Sensor Design Theoretical Modeling and Error Analysis for Reflection Structure Fiber Optical Current Transformer The Calibration Techniques of Paper Basis Weight Sensor Modeling of Collaborative Context-Awareness for Smart Home Sensor Fault Diagnosis Based on SOFM Neural Network Design of Landslide Monitoring and Early Warning System Based on Internet of Things The Design of a Basketball Goal Automatic Detector Chapter 3: Measurement Theory and its Application About the Future of UTC Numerical Analysis of the Effects Caused by Ground Reflection on Aperture Coupling Acoustic Wave Resonance of Stimulated Brillouin Scattering in a Single Mode Fiber Ring Rules of Harmonic Longitudinal Propagation in Various Voltage Classes Study on the Multi-Optical Theodolites Positioning Method Based on Function Restriction Suppressing of Nonlinear Phase Noise in Dispersion Managed Quasi-Linear Transmission Systems Weight Size Determined Variable Step Size LMS Method for Identifying under Damped Systems A Fuzzy Curve Detection Method Based on Lateral Acceleration Research and Performance Analysis on Pedestrian Detection Based on Optimized Hog and SVM Chapter 4: Measurement Technology and Instruments A New Method for Calculating the Volume of Debris Flow Using GIS and RS Technology Design of Thermocouple Verification Data Records Table Based on Labview Development of a Transducer for Dental Implant Stability Measurement Temperature Influence on Real-Time Ultrasonic Detection of Multi-Planetary Gear Transmission Application of Frequency-Voltage Converter Chip in the Vehicle Data Acquisition Measuring Model Deformation with Project Moire´ Interferometry Technique Multi-Point Temperature Monitoring System for the LNG Storage Tank Research on the Impact of CNC Servo Dynamic Characteristic for the On-Line Detection Precision The Quality Test of TOPCON NET-G3A GNSS Receiver Weak Signal Detection and Application in Electronic Experiment Based on Virtual Instrument Design of a Constant Probing Force System for Profilometer Research on Sound Velocity Measurement Method by Three Microphones Based on LABVIEW Study on Temperature Measurement Technology of Oil Immersed Transformer and Associated Prony Algorithm Research of Film Thickness Online Measurement System The Design and Application of the Groundwater Monitoring System Based on the Internet of Things in the HeiHe River Basin Chapter 5: Signal and Information Processing Technology A New Method Based on Lyapunov Exponent to Determine the Threshold of Chaotic Systems An MMSE Approach to Channel Shorting for Underwater Acoustic FH-FSK Communication Application of Barcode Information and Acquisition System for the Machining Process Technology A New Cascaded Stochastic Resonance System and its Application to Weak Double-Frequency Signal Separation Capability Assessment of Satellite Communication System Based on Multi-Granular Modeling 312.5 Mbit/s Visible Light Communication System Based on OOK Modulation Research on Discharge Signals Feature Extraction of Sealing Packaging Food Existing Pinholes Based on EEMD Dynamic Displacement Response Characteristics of a Solenoid Actuator for Electromagnetic Separation Error Processing Techniques of Integral Velocity Based on Frequency Spectrum Forecasting FH-FSK Underwater Acoustic Control and Communication System Based on LDPC Code Monitoring System for Plant Growth Environment Based on Zigbee/RS485 Query Recommendation Based on Document Content User Focuses on Feature Extraction of the Small Leakage Diagnosis of Oil Pipeline Based on Acoustic Signal Pseudo Two-Hop Distributed Consensus with Noise Research on MWD Mud Pulse Signal Waveform Identification Algorithm Ultralow Frequency Standard Vibration Calibration System Based on DSP Analysis on Graduate Employment Based on Data Warehouse Chapter 6: Image and Video Processing Air Quality Evaluation Based on Local Normalized Image Contrast Inexact Distributed Reconstruction via Alternating Direction Method Reasoning Method of Remote Sensing Imagery Based on Topological Transformation Research on Infrared Thermal Imaging Technique for the Sidewall of LNG Storage Tank Extraction of the Palm Vein Texture Features Based on Gabor Wavelet Transforms Facial Expression Recognition Algorithm Based on Gabor Texture Features and Adaboost Feature Selection via Sparse Representation Facial Expression Recognition Based on Monogenic Binary Coding HVS-Based Low Bit-Rate Image Compression A Novel Method of Macro Block Motion Prediction Using Particle Filter An Effective Multi-Feature Extraction Method for Manually Plotted Well-Log Curve Line An Image Segmentation Method of Underwater Targets Based on Active Contour Model Infrared and Low-Light-Level Image Fusion Method Based on Sparse Representation and Color Transfer Outdoor Navigating Scene Labeling Using Importance Factor Based I-RELIEF and Feature Weighted Support Vector Machines Removal of Glass Reflection Using TV-Retinex Model Recognition Method of Cotton Blind Stinkbug Hazard Level Based on Image Processing Stereoscopic Images Enhancement Based on Edge Sharpening of Wavelet Coefficients The Bistatic MIMO Imaging Algorithm Based on Waveform Diversity The Algal Blooms Prediction in the Lakes Based on Remote Sensing Information The Image Information Recognition of Large Structures Based on CAD Model Characteristics Topological Equivalence in Multi-Scale Remote Sensing Image Segmentation Study on Regression Model of Measuring Weld Position Fast Automatic Failure Detection System Preliminary for LED Lamps Based on Machine Vision Technology The Change and Management for Surveying Achievement of Real Estate Using GIS Technology Intelligent Video Surveillance System Based on Sound Source Localization Technology Decision Method of Optimal X-Ray Digital Imaging Parameters Gesture Acquisition and Tracking with Kinect under Complex Background A Novel Approach of Edge Detection Based on Vector Morphology Edge Detection of Color Images Based on Improved Morphological Gradient Operators The Filtering and Streamline of Three-Dimensional Point-Cloud Data Chapter 7: Structural Engineering Analysis, CAD Optimized Design and Intelligent Control Compressive Strength Analysis of MWD Microchip Tracer Analysis of Mechanical Fatigue Behavior for MEMS Structures LNG Tank Dome Air Raising Technology Research Based on Closed-Loop Tension Control Feature Based Parametric Design of Piston Reliability Numerical Study on Effect of Wall on Upwelling Flow Influence of Technical Parameters on Contact Pressure in Straight Bevel Gear Meshing Modeling of Electrostatic Chuck and Simulation of Electrostatic Force Optimization of Flame Arrester Structure of Explosion-Proof Valve with Flame Arrester for Diesel Engine Chapter 7: Structural Engineering Analysis, CAD Optimized Design and Intelligent Control Research of a Dynamic Vibration Absorber with Tunable Resonant Frequency and its Vibration Attenuation Characteristics Research on Finite Element Static Analysis in Mechanical Vehicle Structure Design Research on Vault Plate Installation Technology of LNG Storage Tank Seal Optimization Technology Research of Large LNG Storage Tank Dome Gas Lift Study on Elevator Drive System Dynamics Simulation of Rail Transport Conveyer Transmission Efficiency Analysis and Experiment Research on Screw Oscillating Hydraulic Cylinder Multiple Instance Space Description Method in the Application Research of Complex Product Conceptual Design Design of Multi-Mode PID Controller and Application in Time-Delay Process Remote Household Appliance Control System Based on Internet The Simulation Investigation of Matlab in Intelligent Control Course Blast Vibration Response of Tunnel Influenced by Confining Pressure and Surrounding Rock Type Chapter 8: Design and Control in Modern Engineering System Optimal Power Management of Final Load and Electrolyser in a Solar Hydrogen Power Generation System Design of MFL Inspection Device for Underground Oil Tanks Based on Independent Calibration Method Design of Absorbing Wave Maker Control System Based on Trio Controller Design of a Chaos Phenomenon Exhibition System Dynamic Modeling of a New Version of Cylindrical Planetary Gear Used for a Robotic Arm Modular Design Based on Design Rules Study on the Automatic Spraying System of Dust Suppressant and Speed Adaptive Algorithms Dynamic Motion and Modal Analysis Simulation for the Balance Mass of the Crankshaft of a Two-Cylinder Reciprocating Air Compressor Research and Design of Shortwave and Ultra-Short Wave SDR Engineering in Urban Emergency System Chapter 9: Modern Circuits and Embedded Systems Design of the Embedded Control System of Laser Engraving Machine Research of IOT in the Application of Wisdom Agricultural Research of RAM on the All-Electronic Computer Interlocking System The Research on Embedded Database System of Wireless Network The Effect of Dielectric Charging on Capacitive MEMS Switch Drive Characteristic Analysis and Test System Design for Water Hydraulic Artificial Muscle A Type of Equipment TV Goniometer Angle Deviation Signal Simulation Research Design of a New Dual-Core Intelligent PLC for Ethernet Communication Design and Implementation of an Automatic Hydrological Telemetry System IC Design of the Band-Gap Reference and the Triangular Waveform Generator of Class D Audio Amplifier Improvement and Design of Single Coil Vibrating-Wire Sensor Signal Acquisition System Based on STM32 Study on Energy-Saving Electronic Water Treatment Facility with Automatically Adjustable Operating Voltage Chapter 10: Industrial Engineering Application of Three-Dimensional Fine Geological Modeling in Complex Fault-Block Reservoir with Low Permeability Maintenance and Repair Management and Optimization of Aircraft Base on Working Hour Standard Decentralised Sanitation and Energy Reuse in the Built Environment The Empirical Research on Industry Informatization Incomplete E-V Distribution for Shannon Entropy Manufacturing Defects and Safety Technology of Automobile Product Study on Seepage Control Measures of Plain Reservoirs Based on Soil Salinization after Dam Research on SSCR Technology to Reduce NOx Emissions for Diesel Engines Chapter 11: Robotics A New Technique to Improve Estimation of Position for Serial Robots An Automatic Golf Ball Recycling Robot Design Multi-Robot System for Mapping of the Unknown Environment Optimal Method on the Compensation for Inverse Kinematics of Robot Research on Ping-Pong Balls Collecting Robot Based on Embedded Vision Processing System Multi-Sensor Technique-Based Integrated Navigation and Flight Control on Aerial Robot Chapter 12: Optimization and Control Algorithms An Approach to Command and Control Group Decision-Making Based on Intuitionistic Fuzzy Set Analytic Optimization of Implemented Discrete Time for Kalman Filter during Stationary North-Finding Dynamic Deployment of Wireless Sensor Networks by an Improved Artificial Bee Colony Algorithm Application of Supervisory Predictive Control Based on T-S Model in pH Neutralization Process Research on Classification Effectiveness of the Novel Mamdani Fuzzy Classifier Delay-Dependent H8 Filtering for Neural Networks with Time Delay A Novel Infrared Landmark Indoor Positioning Method Based on Improved IMM-UKF A Two-Stage Optimization Algorithm of Logistics Transportation Network Algorithms of Admission Control and Batch Scheduling of On-Demand Broadcast with Deadlines An Improved PD Type Iterative Learning Control Algorithm Based on Wavelet Filter Weighted K-Means Clustering Analysis Based on Improved Genetic Algorithm Finite-Time Formation Control for Autonomous Underwater Vehicles with Limited Speed and Communication Range Neural Network Ensemble Based on Clonal Selection Algorithm for Sneak Circuit Analysis Research of Routing Protocol for Wireless Meter Reading System Research on Automatic Identification of Substation Circuit Breaker Based on Shape Priors Research on Particle Swarm Optimization Least Square Support Vector Machine for Short-Term Wind Speed Prediction Retrieval and Matching of Case Based on Gray-Relational Theory Segment Matching Gesture Recognition Algorithm and its Application in Smartphone Study on Chaotic Time Series Prediction Algorithm for Kent Mapping Based on Particle Swarm Optimization Study on Elman Neural Networks Algorithms Based on Factor Analysis Accelerate Convergence Rate of Distributed Consensus Algorithm with Optimized Topology Research on Low Speed Serial Links Transmission Optimization Technology An Improved Pure Pursuit Algorithm for Four-Wheel-Steering Autonomous Driving Vehicle Estimation of Origin-Destination Demand Matrix for the Urban Multimodal Traffic Network New Cascadic Algebraic Methods for the Second Order Elliptic Problems Optimization Model of Minimum-Cost-Based Maintenance Schedules for Railway Signal Equipment Chapter 13: Control System Modeling and Simulation Technology 4-DOF Dynamic Model of the Container Crane Spreader Chaos Control for the Unified Chaotic Systems Based on PLC Control of Double Constant Pressure No Tower Water Supply System Design Function Projective Synchronization in Complex Networks with Stochastic Effects via Hybrid Feedback Control Current Sensor Active Fault Tolerance Control Based on Feedback Gain Reconfiguration Nonlinear Adaptive Tracking of the Steward Platform in Task Space Nonlinearity Mode Theory Foundation Research of EMP Coupling by Volterra Series PI Terminal Sliding Mode Control of Theodolite Aiming Chaotic Motor with Time Varying Parameters Research on Control of Low Gravity Simulating System Research on Fuzzy Control Method of Hybrid Maglev System Research on the Jet Flow Control Technology in LNG Liquid Charging Process Study on Safety & Protection Ability of GNSS Receiver from the View of Main Materiel System The Application of Temperature & Humidity Independent Control Air-Conditioning System Based on the Ground Source Heat Pump The Steady State Precision Control of DC Linear Motor Based on State Observer and Feedback The Tensor Product Based Analytic Solutions of Nonlinear Optimal Control Problem The Application of Negative Feedback to Active Control in Vibration Isolation Vertex Stability of Grey Discrete Dynamic Systems Second-Order Flocking Control with Communication Noise The Design of Pressure Regulating System for Large LNG Storage Tank Dome Gas Lift Control Strategy Design and Validation for EV Based on Rapid Prototyping Platform Analysis and Research of the Automated Warehouse Management and Control System Control of BESS Using Frequency-Linked Pricing with High Wind Penetration Chapter 14: Electric Automation, Control, Design and Analysis A Novel Sliding-Mode Observer for Doubly-Fed Induction Generator Constant Pressure Water Supply System Based on Fuzzy Control Technology Design of the Metal-Welder Ultrasonic Transducer by Using Finite Element Analysis Research on the Force-Position Switching Control System of Wire Bonding Head on DSP Application of Siemens S7-300 PLC in the Thermal Power Plant Flue Gas Desulfurization Control System Evaluation Method of Voltage Stability Based on Minimum Singular Value Remote Control of an Agricultural Robot and Tests Study on Real-Time Control of Power System Stability The Design of Phase Shift Soft Switching Full-Bridge Converter Power Supply Based on UCC3895 The Assessment of Transformer Status Based on Gray Theory The Design of Vortex Flowmeter Function Design of Body Control Module and its Test Validation Chapter 15: Software, Computer Applications and Numerical Methods Blind Recognition for Rate below 1/2 Binary Cyclic Codes An Efficient Micro-Payment Protocol Based on a Single Hash Chain Server Design of Personal Cloud Sync Storage System Efficient Pattern Matching Algorithm for Intrusion Detection Systems Research and Proof of Decidability on Self-Similar Fractals Research on Automatic Test Method of VMF Codecs The Research on Cloud Computing Security Model and Countermeasures Research on Data Security of Mobile Payment App Enhancement of Test Platform for Web Application Security Sensibility Analysis of Strengthened Operational Profile Software Reliability Verification Testing Program Considering Hyper-Parameter Trusted Control Flow Integrity for JVM-Based Application Research of Communication Method of Intelligent Building Lighting System Based on CAN Bus Software Implementation of Kompella-Based L2VPN The Estimation of the Hausdorff and Fractal Dimensions of the Global Attractor for 2D Autonomous g-Navier-Stokes Equations Model of Supply Chain Disruption Risk Defense System Research on Security Risk Assessment Model of Smart Mobile Terminals


Best Sellers


Product Details
  • ISBN-13: 9783038263982
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3038263982
  • Publisher Date: 06 Feb 2014
  • Binding: Digital download and online
  • No of Pages: 1318


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Sensors, Mechatronics and Automation
Trans Tech Publications Ltd -
Sensors, Mechatronics and Automation
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Sensors, Mechatronics and Automation

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!