close menu
Bookswagon-24x7 online bookstore
close menu
My Account
THERMEC 2016: (Volume 879 Materials Science Forum)

THERMEC 2016: (Volume 879 Materials Science Forum)

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

This book presents the proceedings of the 9-th International Conference on Processing and Manufacturing of Advanced Materials – THERMEC’2016, which took place between May 29 and June 3, 2016 in Graz, Austria, under the co-sponsorship of The Minerals, Metals & Materials Society (TMS), USA. The Conference was also under the international auspices of professional organizations from Japan, Korea, France, Italy, The Netherlands, Germany, Brazil, Austria, India, and Canada. The Conference was intended to bring together the researchers and engineers/technologists working in different aspects of processing, fabrication, structure/property evaluation and applications of both ferrous and nonferrous materials including biomaterials, and smart/intelligent materials as well as the advanced characterisation techniques. In addition to the contributed papers, the conference committee included in the final program the invited presentations by active researchers from various countries in several topic areas covered at THERMEC’2016.



Table of Contents:
  • Preface, Committees, Sponsors
  • Chapter 1: Keynote Papers
  • Fatigue Life Extension by Crack Repair Using Double Stop-Hole Technique
  • Intermetallic Phases in New Steels
  • An Artistic Approach to Thermal Spray
  • Dynamic Transformation during Plate and Strip Rolling
  • The Role of Microstructure in Creep Strength of 9-12%Cr Steels
  • Micro-Mechanical Responses of Ultrafine-Grained Materials Processed through High-Pressure Torsion
  • The Development of Superplasticity and Deformation Mechanism Maps in an Ultrafine-Grained Magnesium Alloy
  • Revision of ISO 27306 for CTOD Toughness Correction for Constraint Loss
  • Development of Polymer-Based Composite Coatings for the Gas Exploration Industry: Polyoxometalate Doped Conducting Polymer Based Self-Healing Pigment for Polymer Coatings
  • Anelastic Phenomena Preceding the Melting of Pure Metals and Alloys
  • Combined Effects of Grain Boundary Convection and Migration in Dynamic Phase Transformations
  • Complex Cell Physiology on Topographically and Chemically Designed Material Surfaces
  • Metallurgical Aspects Affecting Thermomechanical Processing of Ti Based Microalloyed Steels
  • Thermomechanical Processing of Medium Manganese Steels
  • Diamond Based Schottky Photodiode for Radiation Therapy In Vivo Dosimetry
  • Thermo-Mechanical Training of Stainless Steels to Improve Damping Capacity
  • Development of High-Temperature Shape Memory Alloys above 673 K
  • Advanced Intermetallic TiAl Alloys
  • Development and Research of Low-Cost Titanium Alloys, Especially Case of Japan
  • Enhancement of Mechanical Biocompatibility of Titanium Alloys by Deformation-Induced Transformation
  • Chapter 2: Contributed Papers
  • Magnetic Shape Memory - Polymer Hybrids
  • Hardness Homogeneity in an AZ80 Magnesium Alloy Processed by High-Pressure Torsion
  • Microstructure Evolution and Deformation Mechanisms of Harmonic Structure Designed Materials
  • A Comparative Study of Molecular Motion Cooperativity in Polymeric and Metallic Glass-Forming Liquids
  • Damage Initiation in Dual-Phase Steels: Influence of Crystallographic and Morphological Parameters
  • Microstructure and Friction Behavior of AISI 52100 and D2 Steels Subjected to Ultrasonic Nanocrystalline Surface Modification (UNSM) Technique at a High Temperature
  • Microstructure Study of Nickel-Based Superalloys after Deep Cold Rolling
  • IN792 DS Superalloy: Optimization of EB Welding and Post-Welding Heat Treatments
  • Mathematical Model of Microstructural Evolution of Hot Rolled Wire Rods for Nb Microalloyed Steels
  • A Study on the Microstructural Characterization of René 142 Deposited Atop René 125 Processed through Scanning Laser Epitaxy
  • Correlations between Defect Content, Mechanical Properties and Fractographic Investigation of AlSi9Cu3(Fe) Alloy Reference Castings
  • Influence of Thermal History on the Hot Ductility of Ti-Nb Microalloyed Steels
  • Innovative Experimental Approaches and Physical Measurement Methods for Fatigue Monitoring and Life Assessment
  • Novel Concepts for the Application of Magnesium Sheets and Profiles in Crash Loaded Vehicle Areas
  • Influence of Microalloying Elements Ti and Nb on Recrystallization during Annealing of Advanced High-Strength Steels
  • Regularities of Microstructure Evolution and Strengthening Mechanisms of Austenitic Stainless Steels Subjected to Large Strain Cold Working
  • Effect of Temperature and Strain Rate on the Mechanical Properties of 99.5 Aluminium Rods Extruded by KOBO
  • Miniaturized Flow-Through Bioreactor for Processing and Testing in Pharmacology
  • Microretina: An “Open Source” Tool for Retinal Images Analysis
  • Phase Stability Study of the Shape Memory Alloy CuAl-X (X: Be, Zn, Ti, Ni, Ag and Au) by Ab Initio Calculations
  • Phase Constitution and Martensitic Transformation Behavior of Au-51Ti-18Co Biomedical Shape Memory Alloy Heat-Treated at 1173K to 1373K
  • Thermal Plasticity Index of Nanostructured N-Based Coatings on HSS 6-5-2 (1.3343) Tool Steel
  • Microstructural Investigation of Oxynitrocarburized Components Processed at Different Temperatures
  • Numerical Simulation of the Effects of Preheating on Electron Beam Additive Manufactured Ti-6Al-4V Build Plate
  • Development of Al-Mg-Si-(Cu) Alloys for Automotive Body Panels and the Related Ageing Behaviours
  • Optimal Deformation Hardening in Lead Base Anodes for Copper Electrowinning for an Appropiate Working Life
  • Gold Recovery from PCBs with Thiosulfate as Complexing Agent
  • Friction Stir Processing at High Rotation Rates of a Magnesium Alloy: Mechanical Properties at High Temperatures and Microstructure
  • Fracture Surface Characterisation of Friction Stir Processed Magnesium Alloy after Mechanical Tests
  • Influence of Dynamic Strain Ageing and Long Term Ageing on Deformation and Fracture Behaviors of Alloy 617
  • Development and Industrial Applying on Rolling Mill 5000 of the Model of Austenite Grain Size Evolution in Nb-Microalloyed Steels
  • Effects of Precipitated Particles on Microstructure Evolution during Thermo-Mechanical Processing of Al-Zn-Mg-Cu Alloy
  • Analysis of Deformation and Internal Defect in Flat-Wedge Cross-Wedge Rolling of GH4169 Superalloy
  • Effects of Laser Power on Track Profile and Structure Formation during Selective Laser Melting of CoCrMo Alloy
  • The Observation of Austenite to Ferrite Martensitic Transformation in an Fe-Mn-Al Austenitic Steel after Cooling from High Temperature
  • Mechanical Analyses of Welding in Practical Field
  • Mechanical Properties of Fine-Grained and Ultrafine-Grained Ti-6Al-4V with Equiaxed and Bimodal Microstructures
  • The Effect of Final Annealing Heating Rate on Abnormal Grain Growth in a Fe-3.5%Si Steel
  • In Situ Characterisation of Austenite/Ferrite Transformation Kinetics and Modelling of Interphase Precipitation Inter-Sheet Spacing in V Microalloyed HSLA Steels
  • Tensile Stress Analyses through Digital Image Correlation of Single Lap Joints of High Strength Steel and Aluminum Alloy Using Adhesive Bonding
  • Analysis of Pre-Strain in a Hybrid Forming Process Including Stretch and Incremental Sheet Forming
  • Fatigue Crack Growth in Flow Formed INCONEL 718
  • Modeling the Microstructural and Yield Strength Evolution of an Age-Hardenable Al Alloy for High Temperature Applications
  • Materials Research at University of Nevada, Las Vegas
  • Laser-Induced Surface Texturing of Metal or Organic Substrates for Structural Adhesive Bonding
  • Nanooxides Derived from Hydrotalcites as Catalysts for Dry Methane Reforming Reaction - Effect of [Ni(EDTA)]2- Adsorption Time
  • Comparative Study of Optimization in Pultrusion with Pre-Heating and Die-Cooler Temperature for Improved Cure
  • Dynamic Piezoelectric Behavior of Lithium Niobate at High Temperature
  • Relationship between the Yield Strength-Fracture Toughness Balance and the Multiscale Microstructure of a Maraging Stainless Steel for Aircraft Applications
  • Photonic Application of Diatom Frustules
  • Correlation between Aging Effects and High Temperature Mechanical Properties of the Unmodified A356 Foundry Aluminium Alloy
  • Manganese Effect on Q&P CMnSi Steels
  • Microstructural Evolution and Mechanical Behavior of Low Density Fe-Mn-Al-C Steels with High Stacking Fault Energy
  • Nanocomposites Consisting of Carbon Nanotubes and Nanoparticles of Noble Metals
  • Mechanical Behaviour of Materials during Creep with Changing Loads
  • Microstructure and Texture Evolution in Nickel during Accumulative Roll Bonding
  • An Experimental Investigation of the Size Effects in Forming Processes of High-Purity Thin Metallic Sheets
  • The Microstructural Criterion for Creep Strength Breakdown in a 10%Cr Martensitic Steel
  • SPD Processed Materials Mechanical Properties Determination with the Use of Miniature Specimens
  • Machinability of an Experimental Graphitised Carbon Steel
  • Effect of Microalloying Elements on Phase Transformation, Microstructure and Mechanical Properties in Dual-Phase Steels
  • Development of Armor High Strength Steel (HSS) Martensitic Plates for Troops Carriers
  • Physical Simulation of Thermo-Mechanical Processing of Ferritic-Bainitic Dual Phase (FBDP) Steel
  • Evolution of Microstructure, Phase Composition and Hardness in 316L Stainless Steel Processed by High-Pressure Torsion
  • Influence of Cross Section on the Parameters for Linear Friction Welding of High-Strength Chains
  • Determination of Crystallographic Orientation near a Chill Zone Using Ghost Lines
  • Crystal Structure and Microstructure of Martensite in Ni-Mn-In Alloys and the Behavior of Variant Rearrangement under Uniaxial Loading
  • Accelerated Aging and Portevin-Le Chatelier Effect in AA 2024
  • Microstructure and Mechanical Properties of Mg-6Zn-1.4Y Alloy Produced by Rheo-Squeeze Casting Process
  • The Interface Character Distribution and Intergrannular Corrosion Resistance of Duplex Stainless Steel UNS S32304
  • The Role of the Nd/Zn Ratio on the Stability of Mg-Zn-Nd Clusters and the Evolution of Texture in Two Mg-Zn-Nd Alloys during Annealing
  • Microstructural Evolution in a 9%Cr-3%Co-3%W-VNb Steel during Creep
  • Integrated Defect Classification in Manufacturing of Carbon Fibre Reinforced Thermoplastic Polymer Matrix Composites
  • Plasticity and Size Effects in High Purity Cobalt: An Experimental Study
  • Modelling Methods of Magnetohydrodynamic Phenomena Occurring in a Channel of the Device Used to Wash out Spent Automotive Catalyst on Metallic Substrate by a Liquid Metal
  • Microstructure and Residual Stress in Rotary Friction Welded Dissimilar Metals of AA7020 Aluminium Alloy with 316L Steel
  • Residual Stress Measurements on IN718 Fatigue Specimens Using X-Ray Diffraction Techniques
  • Components of a Heart Catheter System for High Risk Patients
  • Granulation of Bulk Metallic Glass Forming Alloys as a Feedstock for Thermoplastic Forming and their Compaction into Bulk Samples
  • Modelling the Local Microstructure Properties due to Multi-Pass Welding
  • Local Residual Stress Depth Distribution in the Inner Gearing of a Case Hardened Sliding Collar
  • The Quantification of Galling in Forming Operations of Hot Dip Galvanized Sheet Metal under Laboratory Conditions
  • Lightweight Titanium Metal Bipolar Plates for PEM Fuel Cells
  • Microstructure-Property Relationships in Medium-Mn Steels with Metastable Retained Austenite
  • Combination of Microstructural Investigation and Simulation during the Heat Treatment of a Creep Resistant 11% Cr-Steel
  • Creep Tendencies of Cu-Al Thin Wires Submitted to Moderate Temperature Conditions: Influence of Intermetallic Compounds
  • Torsional Piezoelectric Strain in Monocrystalline Paratellurite
  • High Performance Magnesium Based Composites Containing Nano-Length Scale/Amorphous/Hollow Reinforcements
  • Recrystallization Behavior of Aluminum Thin Foils with Various Purity
  • Effect of Boron Addition on Microstructure and Mechanical Properties of AZ84 Mg Alloy
  • Progress in Titanium Machining
  • Unraveling the Age Hardening Response in U-Nb Alloys
  • Casting of an Mg Alloy Clad Strip Using a Twin Roll Caster Equipped with a Scraper
  • High-Temperature Deformation Behavior of (Mo0.85Nb0.15)Si2 Crystals with C40/C11b Lamellar Microstructure
  • Reinforcing Open Cell Aluminum Foams by Amorphous Ni-P Coating
  • Preparation of Al72Ni8Ti8Zr6Nb3Y3 Amorphous Powder and Bulk Material
  • X-Ray and Neutron Scattering Studies of the 9Ni Cryogenic Steel and its Weld Joint
  • Surface Modification of Magnesium Alloy by Shot Lining and Laser Heating
  • Environment-Assisted Cracking of Super-Elastic TiNi Alloy Depending on Solution pH and Electrochemical Potential
  • Evaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminum Alloy 6061 Produced by Electron Beam Welding
  • Material and Mechanical Aspects of CMAS Damage Progression on Thermal Barrier Coatings and its Non-Destructive Detection
  • Effects of Electric Current on the Microstructures and Mechanical Properties of Artificial Aged 6061 Alloy
  • Influence of High-Pressure Torsion on the Microstructure and the Hardness of a Ti-Rich High-Entropy Alloy
  • Magnetic Shape Memory Effect in Ni-Mn-Ga Single Crystal
  • Microstructure and Microtexture Evolution of Invar Alloy after Cross Accumulative Roll Bonding (CARB) Compared to ARB
  • Surface Structuring by Pulsed Laser Implantation
  • Influence of Carbon Addition on Mechanical Properties of Thixomolded Magnesium Alloy
  • Characterization of the Acoustic Emission Response and Mechanical Properties of Mg Alloy with LPSO Phase
  • Phonon Excitations in Pd40Ni40P20 Bulk Metallic Glass by Inelastic X-Ray Scattering
  • Recovery or Non-Recovery in Al-0.1% Mg and Al-1% Mg Alloy during High-Pressure Torsion Processing
  • In Situ Tensile Texture Analysis of a New Mg-RE Alloy
  • Impact of Silicon, Magnesium and Strontium on Feeding Ability of AlSiMg Cast Alloys
  • Study on the Porosity in Al-Zn-Mg-Cu High Strength Alloy DC Ingot
  • Micro-Scale Strength Evaluation for Bonding Interface of Cold Sprayed Coatings
  • Thermal Conductivity and Tensile Property of Mg-Zn-Y Casting Alloys with Long-Period Stacking Ordered Phase
  • Stress and Strain Analysis in an Fe-Ga Alloy Single Crystal
  • Effect of Annealing upon Retention of He and H in Irradiated SiC
  • Preparation of Mg-TM-Y (TM=Transition Metal) Alloys with Long Period Stacking Ordered Phase and their Superior Mechanical Properties
  • High Quality TMCP Production and Metallurgy of Niobium Bearing Steels
  • The Optimal Placement of Sensors by Minimizing the Maximum Probability of Non-Detection Using Genetic Algorithm
  • Surface Engineering of Metal Oxide Photoelectrodes for Improved Band Alignment in Solar Water Splitting Cells
  • Long-Term Performance Analysis of Geomembrane Considering Stress Cracking Resistance
  • Al-5Cu Alloy Processed by Equal-Channel Angular Pressing
  • Analysis of Thin Strip Shape and Profile in Cold Rolling: A Way to Improve Strip Profile and Mechanical Properties
  • Local Surface Phase Stability during Cyclic Oxidation Process
  • Process Parameter Optimization of Fused Deposition Modeling for Helical Surfaces Using Grey Relational Analysis
  • Influence of the Processing Variables on the Microstructure Evolution of a Bainitic Carbide-Free Steel
  • The Effect of Sample Preparation on the Microstructure of Austenitic-Ferritic Stainless Steel
  • Effect of Red Scale on the Bendability of Ultrahigh-Strength Strip Steel
  • Effects of Additional Elements on Hydrogen Storage Properties for Vanadium Alloys
  • Evaluation of Rolling Contact Fatigue by Using an X-Ray Diffraction Ring Analyzer
  • Effect of Electroless Ni-P Plating on Mechanical Properties of Al-4%Ge Alloy
  • Fiber Laser Beam Welding of Ti-6242 - Effect of Processing Parameters on Microstructural and Mechanical Properties
  • Manufacturing of Aluminum Metal Matrix Cast Composites with Carbon Based Additives for Thermal Management Applications
  • Microstructure Evolution Induced by Sliding-Based Surface Thermomechanical Treatments - Application to Pure Copper
  • Determination of the Grain Coarsening Temperature in Nb Microalloyed Steels by Multiphase-Field Model
  • The Effects of Ultrasonic Nanocrystal Surface Modification Technique Temperature on Microstructure and Wear of Alloy 600
  • Microstructural Characterization and Mechanical Properties of Stainless Steel Inlay Welded Dissimilar Materials
  • Effect of Large Strain on Texture Formation Behavior of AZ80 Magnesium Alloy during High Temperature Deformation
  • Effects of Die Steel on Die Soldering of Aluminum Alloy Die Casting
  • Synchrotron Investigation on the Precipitation Behaviour of Niobium Microalloyed Steel
  • Modeling of the Hot Rolling: Towards the Industrial Applicability
  • On the Dynamic Superplasticity
  • Effect of Oxygen Potential Gradient on Mass Transfer in Polycrystalline α-Alumina at High Temperature
  • EBSD Analysis and Assessment of Porosity in Thermal Barrier Coatings Produced by Axial Suspension Plasma Spraying (ASPS)
  • Structure Formation in Ni Superalloys during High-Speed Direct Laser Deposition
  • Structures and Properties of Laser-Assisted Cold-Sprayed Aluminum Coatings
  • The Effect of Boron Addition on Precipitation and Hot Ductility of 1.5Mn-0.1Nb-Ti Carbon Steels in As-Cast Condition
  • New Metallurgy of Additive Manufacturing in Metal: Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM)
  • Novel Bioreactor-System for In Situ-Cultivation of Artificial Tissue
  • Influence of Thermo- and HIP Treatments on the Microstructure and Mechanical Properties of IN625 Alloy Parts Produced by Selective Laser Melting: A Comparative Study
  • Modelling Yield Strength in an A6061 Aluminium Alloy
  • The 3D Imaging and Metrology of Microstructural Elements in Innovative Materials for Clean Energy Systems and Aeronautics
  • Effect of Layer-by-Layer Texture Inhomogeneity on the Stress Corrosion of Gas Steel Tubes
  • Effect of Prior Austenite Grain Size on Yielding Behavior of the Low-C Martensitic Stainless Steel
  • Sheet Forming Processes for AW-7xxx Alloys: Relevant Process Parameters
  • Resolving the Strength-Ductility Paradox through Severe Plastic Deformation of a Cast Al-7% Si Alloy
  • Osteoconductivity of Protein Adsorbed Titanium Implants Using Hydrothermal Treatment
  • Effect of Prior Strain on Damping Capacity and Mechanical Property during Heat Treatment
  • Welding of Automotive Aluminum Alloys by Laser Wobbling Processing
  • Mechanical Properties of Polymer-Based Hybrid Films: Tailoring the Hybrid Interface Using Soft Chemistry
  • Mechanical Behavior of a Metal Matrix Nanocomposite Synthesized by High-Pressure Torsion via Diffusion Bonding
  • Effect of CH4 Content on the Characteristics of Surface Layers of Low Temperature Plasma Nitrided 2205 Duplex Stainless Steel
  • Separating Technology of Pure Zirconia from Zircon-Sand by the Ar-H2 Arc Plasma Fusion and the Microwave Leaching
  • Atomic Layer Deposited Protective Layers
  • The Role of Preliminary Heat Treatment in the Formation of Ultrafine-Grained Structure in the Implementation of the Combined Process "Rolling - Equal Channel Angular Pressing"
  • The Study of the Microstructure of the Metal after Rolling Thick Workpieces of Nonferrous Metals and Alloys in Relief and Smooth Rolls
  • Gas Nitriding of High-Vanadium Alloy Steel
  • Morphology Evolution of Grain Boundary Carbides in Highly Twinned Inconel Alloy 600
  • Deep Ultraviolet Photodetector Based on Sulphur-Doped Cubic Boron Nitride Thin Film
  • Influence of Cu Doping on Martensitic and Magnetic Transitions in Ni-Mn-Sn Alloys
  • The Effect of Process Parameters in Interdendritic-Melt Solidification Control Technique on the Microstructure and Properties of a Ni-Base Superalloy
  • Affinity Viscosimetry Sensor for Enzyme Free Detection of Glucose in a Micro-Bioreaction Chamber
  • Experimental Bio-ESPI for Validation of Magnetic Induced Deformation on HeLa Cells
  • Microstructure of Z-Phase Strengthened Martensitic Steels: Meeting the 650°C Challenge
  • Morphological Evolution of Carbides in DZ125 Superalloy during Heat Treatment
  • Quasi-Static and Dynamic Properties of Ti-3.5Al-2.5V-1.5Fe-0.25O Titanium Alloy Plates
  • Investigations on Hot Tearing Susceptibility and its Mechanism of Mg-Zn-Y Alloys
  • Analysis of the Static Recrystallization Behavior of Nb-Ti Microalloyed Steels Including Low Strain Levels
  • Macrosegregation of Alloying Elements in Hot Top of Large Size High Strength Steel Ingot
  • Influence of Coiling on Microstructural Evolution and Mechanical Properties of Strip-Cast Low-Carbon Low-Niobium Steel
  • Preparation and Squeeze Casting of Nano-SiCP/A356 Composite Assisted with Ultrasonic Vibration Process
  • Enabling Diamond Deposition with Cold Spray through the Coated Particle Method
  • The Effect of Thermo-Mechanical Coupling on Microstructures and Tensile Properties of Al-Li 2198-T8 Alloy via Friction Spot Welding
  • Substituting of a Thermodynamic Simulation with a Metamodel in the Scope of Multiscale Modelling
  • A Novel Facility to Investigate Dust Mobilization in Confined Environments with Applications to the Security of the Pharmaceutical Industry
  • Thermal Desorption Spectroscopy Study on the Hydrogen Behavior in a Plasma-Charged Aluminum
  • Microstructure Evolution of a Directionally Solidified Ternary Eutectic Mo-Si-B Alloy
  • Friction Stir Welding on Light-Weight Metal - Aluminum Alloy Al6061
  • Characterization and Modelling of the Microstructure and Texture Evolution in AlMgSi-Extrusions
  • Oxidation of Fe-Al Alloys (5-40 at.% Al) at 700 and 900 °C
  • Influence of Niobium Content on the Hot Mechanical Behavior of Nickel Alloys
  • Effects of Hybrid Structures on the Stress Reduction and Thermal Properties of Joints in Electronics Devices
  • Formation of Hydrogen by Ball Milling of Mg and Mg Alloy in Seawater
  • Building Blocks for Artificial Extracellular Matrices Based on Cross-Linkable Polysaccharide and Glycosaminglycan Sulfates
  • Effect of Nature Chemical Linker on the Formation of a Zeolitic Layer on Zirconia Substrates
  • Boron Effect on Hardenability of High Thickness Forged Steel Materials
  • On the Elaboration of Metal-Ceramic Composite Coatings by Laser Cladding
  • Impact of the Confinement on the Intra-Cage Dynamics of Molecular Hydrogen in Clathrate Hydrates
  • Effects of α+γ Intercritical and γ Single-Phase Annealing on Texture Evolution in Cold-Rolled Dual-Phase Steel Sheets
  • Technical Challenges in Narrow-Gap Root Pass Welding during Tandem and Hybrid Laser-Arc Welding of a Thick Martensitic Stainless Steel
  • Microstructure Evolution during LCF of a 10%Cr Steel at Room Temperature
  • Influence of Severe Plastic Deformation on Mechanical Properties of an AA5024 Alloy
  • Thermomechanical Adhesion between Metallic Glass and Die Materials
  • Crystallographic Investigation of the Initial Solidification Grain Structure in Al-Si Alloy
  • Effect of Deformation Structure on Strength of a Low Alloyed Cu-Cr-Zr Alloy
  • Friction and Wear Properties of αAlB12-NiAl Cermet Prepared by Spark Plasma Sintering
  • Phase Stability and Mechanical Properties of Ti-Cr-Sn-Zr Alloys Containing a Large Amount of Zr
  • Microstructure of Rapidly Solidified Melt-Spun Ribbon in AlCoCrFeNi2.1 Eutectic High-Entropy Alloys
  • Misorientation Measurement of Individual Grains in Fatigue of Polycrystalline Alloys by Diffraction Contrast Tomography Using Ultrabright Synchrotron Radiation
  • Development of a New Powder/Solid Composite for Biomimic Implant Materials by Electron-Beam Additive Manufacturing
  • Microstructure Formation of High Pressure Torsion Processed (α + γ) Two Phase Stainless Steel
  • Influence of Nano Reinforcement Volume Percentage on Fabrication of Surface Nanocomposite by FSP
  • Influence of Flash Treatment on Pseudoelastic Behaviour of Biomedical Ti-25Nb-3Zr-3Mo-2Sn Alloy
  • In Situ Techniques for the Investigation of the Kinetics of Austenitization of Supermartensitic Stainless Steel
  • Metal Matrix Composites as Environment-Friendly Protective Coatings
  • Characteristic Features of the Modulated Structure Appearing in the Multiferroic Material Bi1-xSmxFeO3 around x = 0.15
  • Iron-Water Interface under Electrochemical Condition
  • MgO Implanted in Rat Tibia Bone Marrow is Osteoinductive through the Formation of a Matrix, Containing Hydroxyapatite
  • Compressive Residual Stresses and Associated Surface Modifications Induced in Ti6Al4V by Laser Shock Processing
  • Deformation Microstructures and Mechanical Properties of an Austenitic Stainless Steel Subjected to Warm Rolling
  • Evolution of Microstructure and Mechanical Properties with Different Partitioning Conditions of Q&P Steels
  • Rapid Measurement of Texture of Metals by Time-of-Flight Neutron Diffraction at iMATERIA and its Applications
  • Application of Thermo-Calc TCFE7 to High-Alloyed Mottled Cast Iron
  • Deformation Behavior of Inhomogeneous Layered Microstructure
  • Fundamental Aspects of Rolled Zn Alloy Sheet Formability: Structure-Property and Failure Mode Relationships
  • Effect of Aluminum Content on Texture Formation Behaviors in Magnesium Alloy
  • Modeling and Simulation of Q&P Steels
  • Experimental Investigation of Welding Parameters on Automatic TIG Welding of Aluminium 5083 Plate
  • Modelling the Static Recrystallization Kinetics of Microalloyed TWIP Steels with Different Alloying Contents
  • Influence of Initial Heat Treatment on the Microhardness Evolution of an Al-Mg-Sc Alloy Processed by High-Pressure Torsion
  • Influence of Second Phases on the Superplasticity of Mg-Tm-Y-CeMM Alloys Containing LPSO-Phases
  • The Effect of High-Doze Neutron Irradiation on Texture and Substructure Condition of Cladding Tubes from Zr-Based Alloys
  • Effect of High Temperature Exposure on the Mechanical Properties of Self-Hardening Al-Based Alloy
  • Effect of Secondary Phases Precipitation on Corrosion Resistance of Duplex Stainless Steels
  • Modeling of Grain-Boundary Mobility and Nucleation Rate during Discontinuous Dynamic Recrystallization in Ni-Nb Alloys and a High-Purity Alloy Derived from SAE 304L
  • Evolution of Ni Structure under ECAP and DCAP and Further Annealing
  • Coupling of Computational Thermodynamics with Kinetic Models for Predictive Simulations of Materials Properties
  • Photolithography of 3D Scaffolds for Artificial Tissue
  • Fatigue Deformation Behavior of Fe-Mn-C-(Al) TWIP Steels
  • A Statistical Methodology to Reconstruct Nucleation Pathways in the Fe-Cu System
  • Solidification Behavior of Aluminum-Copper Based Alloy during Controlled Diffusion Solidification
  • Anti-Bacterial Nanocomposites by Silver Nano-Coating Fragmentation
  • Softening Kinetics of Plain Carbon Steels Containing Dilute Nb Additions
  • Biocompatible Ceramic-Biopolymer Coatings Obtained by Electrophoretic Deposition on Electron Beam Structured Titanium Alloy Surfaces
  • Neutron Diffraction Analysis of Light Alloys: A Review
  • Bridging the Gap between Ab Initio and Large Scale Studies - A Monte Carlo Study of Cu Precipitation in Fe
  • Innovative Surface Treatments of Titanium Alloys for Biomedical Applications
  • Laser Pulse Simulation of High Energy Transient Thermal Loads on Bulk and Plasma Sprayed W for NFR
  • Study on the Formation of Stray Grains during Directional Solidification of Nickel-Based Superalloys
  • Texture Characterization of Stainless Steel Cladded Layers of Process Vessels
  • Effect of Previous Grain Size on Recystallization Texture and the Formability of the Nb Ferritic Stainless Steel
  • The Behaviour of Graphitized Steels in Machining Processes
  • A New Approach for the Spectroscopic Detection of Different pH-Values
  • Influence of Long Heat Treatments on Hardness and Tribological Behaviour of HVOF Sprayed WC-CoCr and Cr3C2-25NiCr Coatings
  • Hot Deformation Behavior and Stability Criteria of WE54 Magnesium Alloy
  • Development of a 2.25%Cr Steel P23 Reinforced with Micro/Nano-Carbide Particles Produced by Self-Propagating High-Temperature Synthesis
  • Age Hardening Behavior of Al-Li Alloys Produced by Sand Mold Process
  • Effect of Silicide on Dynamic Recrystallization in Near Alpha Titanium Alloy
  • Manufacturing of ODS RAFM Steel: Mechanical and Microstructural Characterization
  • Shape Recovery of Polymeric Matrix Composites by Irradiation
  • Comparison of Microstructure and Mechanical Behavior of the Ferritic Stainless Steels ASTM 430 Stabilized with Niobium and ASTM 439 Stabilized with Niobium and Titanium
  • Recrystallization Kinetics and Texture Evolution of Nb Stabilized Ferritic 430 Stainless Steel Cold Rolled and Isothermal Annealed
  • Thermal Effect during Electromagnetic Pulse Welding Process
  • Re-Melting Technique with High Intense Pulsed Plasma Beams Applied for Surface Modification of Steel - Own Investigations
  • Effect of Preparation Conditions of TiB2 Particle Dispersed Al Composites on Microstructure
  • X-Ray Stress Measurement of Austenitic Stainless Steel with cosα Method and Two-Dimensional X-Ray Detector
  • Physical Modelling of Metallurgical Processes
  • Effects of Particle Size on Fabrication of Al-TiO2 Functionally Graded Materials by Centrifugal Mixed-Powder Method
  • Usability of Ti6Al4V Powder via Hydride-Dehydride Process for Selective Laser Melting Process
  • GaN Thin-Film-Depositions on Glass and Amorphous-SiO2-Layer-Deposited Si Single-Crystalline Substrates
  • Influence of Different pH and Fluoride Addition on the Corrosion Behavior of the Sintered CoCr Alloy Ceramill Sintron Compared to the Cast Alloy Girobond NB
  • Liquid Composite Molding: A Widely Used Group of FRPC Processing Techniques, but still a Challenging Topic
  • Miniaturized Laser Power Sensor via Rapid Phototyping
  • Influence of Corrosive Conditions on the Mechanical Performance of Flow Drill Screw Joints between Light Metals
  • Calculation of the Stress Interaction between Dislocation Pile-Ups in Neighbouring Misoriented Grains
  • High-Pressure Synthesis of Skutterudite-Type Thermoelectric Materials
  • Development of Joining Method between Zircaloy and SiC/SiC Composite Tubes by Using Diode Laser
  • Kinetics of Submicrocrystalline Structure Formation in a Cu-Cr-Zr Alloy during Large Plastic Deformation
  • The Effects of Interfacial Heat Transfer Coefficient on the Microstructure of High-Pressure Die-Cast Magnesium Alloy AM60B
  • Cooling Curve Based Estimation of Mechanical Properties in High Strength Steel Welds
  • Features of Electronic States in the Highly-Correlated Electronic System Sr1-xNdxMnO3 around x = 0.50
  • Fluctuation of Position and Energy of a Fine Particle in Plasma Nanofabrication
  • Microstructure and Porous Defects of a Spray-Formed and Hot Worked 7000 Aluminum Alloy
  • Hot Torsion Tests - A Reliable Rolling Simulation Method for C-Mn Steels
  • Development of a Biomimetic Metallic Femoral Stem: Methodological Approach
  • The Issue of Grain Size Distribution Using Mean Field Models for Dynamic and Post-Dynamic Recrystallization
  • Measurement of Residual Stresses in Linear Friction Welded In-Service Inconel 718 Superalloy
  • Evaluation of the Hardening Capacity of Low-Alloyed Steels Quenched by HPGQ in Vacuum Furnaces
  • Mathematical Modelling of Steel Quenching
  • An Appraisal of Direct Quenching for the Development and Processing of Novel Super-High Strength Steels
  • Effect of Heat Treatment on the Microstructure Evolution of Ti-6Al-3Sn-3Zr-3Mo-3Nb-1W-0.2Si Titanium Alloy
  • Nb-Microalloying in Next-Generation Flat-Rolled Steels: An Overview
  • Advanced Evaluation of Fatigue Phenomena Using Non-Destructive Testing Methods
  • The Effects of Intercritical Annealing Temperature and Initial Microstructure on the Stability of Retained Austenite in a 0.1C-6Mn Steel
  • Microstructure Refinement in the CoCrFeNiMn High Entropy Alloy under Plastic Straining
  • Novel ESPI Measurement Prototype for Analyzing Biological Samples from Cell Culture Technique
  • Electron Beam Welding of TZM Sheets
  • Systematic Investigation of the Temperature Field in Atmospheric Plasma Processing (APP)
  • Effect of As-Rolled Microstructure on Static Recrystallization Characteristics and Texture Evolution during Annealing
  • Use of Carbon Nanomaterials as a Catalyst Support in Fuel Cells
  • Effect of the Interfacial Thermal Resistance on Effective Thermal Conductivity of Al/SiC Particle-Dispersed Composites
  • Influence of β-Mg17Al12 Phase on Initial Pitting Process of AZ91D Magnesium Alloy
  • The Low-Nickel Cryogenic Steel Alloyed by Nitrogen
  • Three-Dimensional Dynamic Explicit Finite Element Analysis of Charpy Impact Test
  • Microstructure Observations of Graphite in Gray Cast Iron Using TEM
  • Dispersion of CNTs in Selective Laser Melting Printed AlSi10Mg Composites via Friction Stir Processing
  • Design and Characterization of Conductive Biopolymer Nanocomposite Electrodes for Medical Applications
  • Thermal Joining of Highly Conductive Bonds by Using Reactive Al-Ni Nanofoils
  • Relationship between Microstructure and Mechanical Properties in Q&P-Steels
  • Progress in the Understanding of the Microstructure Evolution of Direct Laser Fabricated TiAl
  • Microstructure and Properties of Al-12.7Si-0.7Mg Alloy Extrusion after End-Quenching Test
  • Microstructure Evolution and Creep Properties of a Single Crystal Nickel-Based Superalloy with Various Orientations
  • Effect of SPD Processing Technique on Grain Refinement and Properties of an Austenitic Stainless Steel
  • Effect of Tempering on Microstructure and Creep Properties of P911 Steel
  • ω Phase Transformation and Mechanical Properties in Binary Zr-Nb Biomedical Alloy
  • Ti-Cu-Based Amorphous Powders Produced by Ball-Milling
  • Development of the Advanced TBC for High Efficiency Gas Turbine
  • Fabrication of High Porosity Mullite Foams and their Thermal Properties
  • Influence of Thermomechanical Treatment on the Damping Capacity of Selected Magnesium Alloys
  • Effect of а Number of Transition Metals on the Cohesive Properties of Cr-Ni-Base Alloys
  • Reverse Transformation Behavior Induced by Shot-Peening for SUS410S Martensitic Stainless Steel
  • Nonlinear Optimization Methods for the Determination of Heat Source Model Parameters
  • Effects of Cross-Rolling on Deformation Texture Evolution in Unalloyed Titanium
  • High-Temperature Mechanical Properties and Constitutive Modelling of Ti6Al4V Sheets
  • Early Instability Phenomena of IN792 DS Superalloy
  • Effect of Heat Treatments on TiH2: Surface Composition and Hydrogen Release
  • Texture Gradient through Thickness of a Cross Roll-Bonded AA5754/AA6061 Aluminum Composite
  • Shock-Induced Reaction Characteristics of an Al/Ni Composite Processed via Accumulative Roll-Bonding
  • Effects of Initial Micro-Structures on Deformation Behaviors of Commercial Pure Titanium
  • Microstructural Evolution of AZ31 under the Application of High Density Electric Current Pulses
  • Martensitic Transformation and Crystal Structure Characterization of Ni-Fe-Ga-Co Ferromagnetic Shape Memory Alloys
  • Refined and Uniform Microstructure with Superior Mechanical Properties in Medium Plate Microalloyed Steel with Reduction in Mn-Content during Ultrafast Cooling
  • Linear Friction Welding of IN718 to Ti6Al4V
  • Electron Beam Welding of High Strength Quenched and Tempered Steel
  • Saturation of Deformation Twinning in Magnesium Alloys
  • Temperature Field Evolution during Flash Butt Welding of Railway Rails
  • Effects of Microalloy Additions and Thermomechanical Processing on Austenite Grain Size Control in Induction-Hardenable Medium Carbon Steel Bar Rolling
  • Dissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature Applications
  • Influence of NbC-Precipitation on Hot Ductility in Microalloyed Steel - TEM Study and Thermokinetic Modeling
  • Modification Effects of Sb on Al7SiMg Alloy Measured with Cooling Curve Analysis
  • Numerical Simulation of Pore Evolution of 7050 Aluminum Alloy during Hot Compression Process
  • Defects and Charging Processes in Li-Ion Battery Cathodes Studied by Operando Magnetometry and Positron Annihilation
  • Processing and Thermoelectric Properties of New Si-/ Se-/ Sn-Based Intermetallics
  • Microstructure of Fiber Laser Deposited WC-Co Cemented Carbide and Carbon Steel
  • Effect of Continuous Annealing Temperature on Microstructure and Mechanical Properties of a High Strength Cold-Rolled DP980 Steel
  • Framework Structures for Mg Battery Cathodes
  • Further Study on the Effect of Environment on Fatigue Crack Growth Behavior of 2000 and 7000 Series Aluminum Alloys
  • Crystallographic Features of Electronic States in the Highly-Correlated Electronic System Sr1-xSmxMnO3 around x = 0.50
  • Effect of Nitrogen on Age-Hardening of Metastable Austenitic Stainless Steel after Cold Drawing
  • Effect of Chlorine Atoms for Development of Aluminum Corrosion
  • Initiation and Propagation Behaviors of Small Crack in a Polycrystalline Ni-Base Superalloy under Thermo-Mechanical Fatigue Loading
  • Crystal Structure, Microstructure and Martensitic Transformation Path in Ni-Mn-In Alloys
  • Effect of Grain Size on Oxidation Resistance of Unalloyed Titanium
  • Grain Boundary Engineering of ECAPed OFHC Copper
  • Microstructure Evolution of Laser Direct Metal Deposition of M2 High Speed Steel
  • Mg-Zn-Y Alloys with Long-Period Stacking Ordered Phases: Deformation, Creep, Solute Segregation and Strengthening Mechanisms at Elevated Temperatures
  • Deformation Behavior of Fe-Al-Co-Ti Single Crystals Containing Co2AlTi Precipitates
  • Effect of Added Elements on Microstructures and Joint Strength of Lead-Free Sn-Based Solder Joint Dispersed IMC Pillar
  • Crystallographic Features of the State Appearing in the Multiferroic Material Bi1-xLaxFeO3 around x = 0.20
  • Influence of Grain Size on Work-Hardening Behavior in 12Cr Stainless Steel
  • RETRACTED PAPER: Evaluation of Parameters Effect on Microstructure and Mechanical Properties in TIG Welding of A105 to A106 Steels
  • The Effect of Sc Addition on Microstructure in Mg-Gd Alloys
  • Comparison of Self-Annealing Behaviors in (001)- and (111)-Oriented Electrodeposited Silver Films by In Situ EBSP Analysis
  • Effect of Friction Stir Welding on Microstructure of a 5024 Alloy
  • Microstructure and Property of Fe-Based Alloy Modified Layer on 304 Stainless Steel by High-Energy Pulse Laser-Like Cladding (HPLC)
  • Microstructures and Properties of Aluminum Alloys during Repetitive Continuous Extrusion Forming
  • The Portevin-Le Chatelier Effect and Kinematics of Deformation Bands in an Al-Mg-Sc Alloy: Effect of Grain Size
  • Effects of Hydraulic Pressure on Shape Accuracy of Drawn Circular Cups during Micro Hydro Deep Drawing
  • Kinetics of Microstructure Refinement in Titanium Alloys during Deformation
  • Needle Like Fe-Containing Intermetallic Compounds of High Silicon Aluminum Alloy with Fe Modified by Mn and Ultrasonic Vibration
  • Microstructure and Mechanical Properties of Medium Manganese Steel Plate with High Strength and Toughness
  • Effect of Mischmetal Additions and Solution Heat Treatments (T4) on the Microstructure and Mechanical Properties of Thixocast ZK60-RE Magnesium Alloys
  • Dissimilar Friction Stir Welding of HSLA Steel to Austenitic High-Mn TRIP Steel
  • Effects of Warm Working on Microstructural and Shear Deformation Properties of TRIP-Aided Martenitic Steel
  • Characterization of Phase Transitions Occurring in Solution Treated Ti-15Mo during Heating by Thermal Expansion and Electrical Resistance Measurements
  • Microstructure and Creep Properties of Silicon- and/or Germanium-Bearing Near-α Titanium Alloys
  • Formation and Dissolution of Hydride Precipitates in Zirconium Alloys: Crystallographic Orientation Relationships and Stability after Temperature Cycling
  • Research on Microstructure Evolution in Al-9.8Zn-2.0Mg-1.8Cu Alloy during Solution Treatment
  • Concurrent Validity of a New Contact Mat for Estimating Vertical Jump Height
  • The Use of Vibrotactile Stimulation for Improving Manual Tasks in Parkinson's Disease Patients
  • Evaluating Athletic Performances with a Real Time Location and Tracking System
  • Otoacoustic Emissions as a Promising Diagnostic Tool for the Early Detection of Mild Hearing Impairment - Technical Advances in Acquisition, Analysis and Modeling
  • Near Infrared Device for Tissue Inflammation Evaluation
  • Evolution of Recrystallization Textures in Cold-Rolled Commercially Pure Aluminum
  • Change in Mechanical Strength and Bone Contact Ratio of Beta-Type TNTZ Subjected to Mechanical Surface Modification
  • Tensile and Fatigue Properties of Miniature Size Specimens of Sn-5Sb Lead-Free Solder
  • Effect of Sr Addition on the Solidification Structure in Al-6mass%Mg-3mass%Si Alloy
  • Analysis of Recrystallization Behavior of Hot-Deformed Austenite Reconstructed from EBSD Orientation Maps of Lath Martensite
  • Superplasticity of Friction-Stir Welded Al-Mg-Sc Alloy with Ultrafine-Grained Microstructure Obtained by Warm Severe Plastic Deformation
  • Complex Nano-Scale Structures for Unprecedented Properties in Steels
  • The Effect of Thermomechanical Processing Temperature-Strain-Time Parameters on the Mesostructure Formation
  • Thermal Conductivity of Cubic Boron Nitride (cBN) Particle Dispersed Al Matrix Composites Fabricated by SPS
  • Lightweight Sandwich Structures in Innovative Vehicle Design under Crash Load Cases
  • Recrystallization Twinning in Stable Single Crystals of Cu-2%Al and Al-1%Mn Alloys
  • Effects of Magnetic Field Intensity on Carbon Diffusion in Pure Iron in Paramagnetic Ferrite Region
  • Solidification of Al-Pb Alloy under the Effect of Micro-Alloying Element Ti and C
  • In Vitro Assessment of Hydroxyapatite Coating on the Surface of Additive Manufactured Ti6Al4V Scaffolds
  • Aging Property of AZ91D Magnesium Alloy Screw Thread-Rolled at Room Temperature Using Extrusion-Torsion Simultaneous Processing
  • Continuous Modeling of Dislocation Cores Using a Mechanical Theory of Dislocation Fields
  • Simultaneous Precipitation and Recrystallization during Hot Deformation of Ti, Nb and V Microalloyed Steel
  • Solid-State Bonding of 5052 Aluminum Alloy/316L Stainless Steel by Using Organic Salt Formation/Decomposition Reaction
  • Theoretical Study of Local Electric Conductive Properties by Electronic Tension Density
  • Influence of a Direct Current on the Solidification of Immiscible Alloys
  • Stereolithographic Additive Manufacturing of Ceramic Components by Using Nanoparticle Paste Feeding
  • Revealing the Individual Hardening Effects of Twins, Dislocations, Grain Boundaries and Solid Solution in a Twinning-Induced Plasticity Steel
  • Development of High-Performing Extruded Magnesium Alloy
  • Scalable Methods to Obtain Superhydrophobicity onto Metallic Surface
  • High Temperature Mechanical Properties of Harmonic Structure Designed SUS304L Austenitic Stainless Steel
  • Effect of Misch Metal Addition on Thermal Conductivities and Mechanical Properties of Mg-4Zn-0.5Ca Alloys
  • Thermo-Mechanical and Low Cycle Fatigue Failure Behavior Relevant to Temperature Regime in a TBCed Superalloy Specimen
  • Osteoconductivity of Superhydrophilic Ti- and Zr-Alloy for Biomedical Application
  • Microstructure and Mechanical Properties of Nb Alloyed Steel Processed by Hot Equal Channel Angular Extrusion
  • Dissimilar Metal Joining of A5052 Aluminum Alloy and AZ31 Magnesium Alloy Using Laser Brazing
  • Study of the Precipitation of Secondary Phases in Duplex and Superduplex Stainless Steel
  • Practical Use of Computer Model STAN 2000 for Improvement and Creation of Regimes for Hot Rolling of Steels on SEVERSTAL Mill 2000
  • Electrochemical Behaviors of Biomedical Nanograined β-Type Titanium Alloys
  • Evolution of Microstructure and Microhardness in Ti-15Mo β-Ti Alloy Prepared by High Pressure Torsion
  • Superelasticity of Ti-Nb-Zr Alloys and their Medical Application
  • Microstructure of AZCa912 Continuous Casting Bar after Hot Compression


Best Seller

| | See All

Product Details
  • ISBN-13: 9783035731293
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 879 Materials Science Forum
  • ISBN-10: 3035731292
  • Publisher Date: 15 Nov 2016
  • Binding: Digital download and online
  • No of Pages: 2720


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Be The First to Review
THERMEC 2016: (Volume 879 Materials Science Forum)
Trans Tech Publications Ltd -
THERMEC 2016: (Volume 879 Materials Science Forum)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

THERMEC 2016: (Volume 879 Materials Science Forum)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    | | See All


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!
    ASK VIDYA